Dr Dr Ir NURDIN ALI, Dipl.-Ing.
S2 - Teknik Mesin
SINTA Score Overall
1.757
SINTA Score 3Year
512
Affiliation Score Overall
1.610.009.984
Affiliation Score 3Year
679.624.000
Authors Publication
Database Author
| Scopus | WOS | Garuda | GS | |
|---|---|---|---|---|
| Article | 63 | 13 | 5 | 100 |
| Citation | 295 | 70 | 0 | 476 |
| Cited Document | 51 | 11 | 0 | 71 |
| H-Index | 9 | 5 | 0 | 11 |
| i10-Index | 9 | 0 | 0 | 13 |
| G-Index | 1 | 0 | 0 | 1 |
List of Articles
| No | Title | Publication | Date | Type | URL | |
|---|---|---|---|---|---|---|
| 1 | Impact of Zinc Oxide Addition on Oil Palm Empty Fruit Bunches Foamed Polymer Composites for Automotive Interior Parts | Polymers | 1 January 2023 | Journal |
|
|
| 2 | Failure Analysis of the Rear Driveshaft Using Experimental and Analytical Methods | Aip Conference Proceedings | 30 January 2023 | Conference Proceedin |
|
|
| 3 | The Analysis of the Failure of Leaf Spring Used as the Rear Suspension System in 110 PS Diesel Trucks | Aip Conference Proceedings | 30 January 2023 | Conference Proceedin |
|
|
| 4 | Effect of variations in pouring temperature on tensile strength of CuZn cast alloys | Materials Letters X | 1 March 2023 | Journal |
|
|
| 5 | Effect of Hybridization of Ramie Fibers on the Vibrational and Damping Responses of Ramie/Glass/Epoxy Resin Composite Laminates | Key Engineering Materials | 1 January 2023 | Book Series |
|
|
| 6 | Learning Media for Basic Physics using Interactive Web-based Simulation | Proceedings 2022 2nd International Conference on Information Technology and Education Icit and E 202 | 1 January 2022 | Conference Proceedin |
|
|
| 7 | Analysis of the Leaf Spring Failure in Light Duty Dump Truck | Key Engineering Materials | 1 January 2022 | Book Series |
|
|
| 8 | Effect of pouring temperature on impact toughness on brass (Cu-zn) through metal casting | Metalurgija | 1 July 2021 | Journal |
|
|
| 9 | Effect of pouring temperature on impact Toughness on brass (cu-zn) through metal casting | Anali Zavoda za Povijesne Znanosti Hrvatske Akademije Znanosti i Umjetnosti u Dubrovniku | 1 July 2021 | Journal |
|
|
| 10 | FAE Analysis of Boat Propeller with Differences of Loading Conditions and Manufacturing by Casting Process | Lecture Notes in Mechanical Engineering | 1 January 2021 | Book Series |
|
|
| 11 | The atmospheric corrosion of structural steel after exposure in the palm oil mill industry area of aceh-indonesia | Indonesian Journal of Chemistry | 1 January 2021 | Journal |
|
|
| 12 | Mapping Сorrosivity steel construction at atmospheric conditions in langsa town center and palm oil mill industry | Key Engineering Materials | 1 January 2021 | Book Series |
|
|
| 13 | Failure analysis on the fracture shaft of a centrifugal pump used for diesel engine cooling system | Key Engineering Materials | 1 January 2021 | Book Series |
|
|
| 14 | Failure analysis of the short drive shaft in a screw press machine | Key Engineering Materials | 1 January 2021 | Book Series |
|
|
| 15 | Comparison of hardness and microstructure of cast wheel and spoke wheel rims of motorcycles made of aluminum alloy alloy | Key Engineering Materials | 1 January 2021 | Book Series |
|
|
| 16 | Failure analysis of a fractured leaf spring as the suspension system applied on the dump truck | Key Engineering Materials | 1 January 2021 | Book Series |
|
|
| 17 | A simple empirical model for predicting weight loss of mild steel due to corrosion in NaCl solution | International Journal of Automotive and Mechanical Engineering | 1 January 2020 | Journal |
|
|
| 18 | Effect of coal blended on the physical properties of iron ore briquette for direct reduction iron | Materials Science Forum | 1 January 2020 | Book Series |
|
|
| 19 | Study on fracture failures of the super heater water pipe boiler | Defect and Diffusion Forum | 1 January 2020 | Journal |
|
|
| 20 | Effect of different gating systems and sand mold binder on the castquality of bicycle frame produced through sand casting method | Defect and Diffusion Forum | 1 January 2020 | Journal |
|
|
| 21 | Failure analysis of spur gears used in transmission system applied on a hand tractor | Key Engineering Materials | 1 January 2020 | Book Series |
|
|
| 22 | The Effect of Chemical Composition on Grain Size and Formability of the Free-Lead Cu-30Zn Alloy: A Short Review | Iop Conference Series Materials Science and Engineering | 1 January 2019 | Conference Proceedin |
|
|
| 23 | Characterization of Polymeric Foam Composite Reinforced with Empty Fruit Bunch | Iop Conference Series Materials Science and Engineering | 1 January 2019 | Conference Proceedin |
|
|
| 24 | Corrosion Rate of Low Carbon Steel for Construction Materials in Various NaCl Concentrations | Iop Conference Series Materials Science and Engineering | 1 January 2019 | Conference Proceedin |
|
|
| 25 | Atmospheric Corrosion Assessment of Structural Steel Exposed in the Environment of Palm Oil Processing (PKS) Industry Around Coastal Zone | Iop Conference Series Materials Science and Engineering | 1 January 2019 | Conference Proceedin |
|
|
| 26 | Study on Mechanical Properties of Composite Polymeric Foams Reinforced by Bagasse Fibers | Iop Conference Series Materials Science and Engineering | 1 January 2019 | Conference Proceedin |
|
|
| 27 | Study of leaf spring fracture behavior used in the suspension systems in the diesel truck vehicles | Iop Conference Series Materials Science and Engineering | 3 July 2019 | Conference Proceedin |
|
|
| 28 | Failure analysis of the fracture surface of the crankshaft of a vehicle | Iop Conference Series Materials Science and Engineering | 8 July 2019 | Conference Proceedin |
|
|
| 29 | Numerical analysis of the stress leading to fatigue failure on a coil spring of the front suspension of a car | Iop Conference Series Materials Science and Engineering | 8 July 2019 | Conference Proceedin |
|
|
| 30 | Analysis of surface failure of coil spring in passenger vehicle suspension system | Iop Conference Series Materials Science and Engineering | 8 July 2019 | Conference Proceedin |
|
|
| 31 | Effects of welding on the change of microstructure and mechanical properties of low carbon steel | Iop Conference Series Materials Science and Engineering | 8 July 2019 | Conference Proceedin |
|
|
| 32 | Failure Analysis of the Leaf Spring of Truck Colt Diesel Using Finite Element Method | Iop Conference Series Materials Science and Engineering | 5 September 2019 | Conference Proceedin |
|
|
| 33 | The needs to investigate the effect of road surface vibrations to the fatigue life of a coil spring | Iop Conference Series Materials Science and Engineering | 6 September 2019 | Conference Proceedin |
|
|
| 34 | Effect soil resistivity in mapping potential corrosion in underground pipelines area | Aip Conference Proceedings | 26 June 2018 | Conference Proceedin |
|
|
| 35 | The Morlet wavelet transform for reducing fatigue testing time of an automotive suspension signal | Aip Conference Proceedings | 13 July 2018 | Conference Proceedin |
|
|
| 36 | Fatigue feature clustering of modified automotive strain signals for saving testing time | International Journal of Automotive and Mechanical Engineering | 1 June 2018 | Journal |
|
|
| 37 | A Review on the Tensile Properties of Bamboo Fiber Treatments | Aip Conference Proceedings | 22 May 2023 | Conference Proceedin |
|
|
| 38 | Investigation of Mechanical Properties and Thermal Analysis of Bagasse Fiber Reinforced Composite Polymer Foam | International Journal on Advanced Science Engineering and Information Technology | 1 January 2023 | Journal |
|
|
| 39 | Effect of Fibre Treatment on Tensile Properties in Bamboo Fibre Extraction: A Review Paper | Lecture Notes in Mechanical Engineering | 1 January 2022 | Book Series |
|
|
| 40 | A Comparative Study on Corrosion Rate of Carbon Steel in NaCl Solution with Continuous and Discontinuous Weight Loss Methods | Key Engineering Materials | 1 January 2022 | Book Series |
|
|
| 41 | Experimental Study the Effect of Reduction Temperature of Iron Ore Briquettes on Minimum Energy of Reduction | Lecture Notes in Mechanical Engineering | 1 January 2021 | Book Series |
|
|
| 42 | Fracture surface of polyester/areca nut fiber composite under impact and tensile loading | International Journal of Emerging Trends in Engineering Research | 1 June 2020 | Journal |
|
|
| 43 | The empirical prediction of weight change and corrosion rate of low-carbon steel | Heliyon | 1 September 2020 | Journal |
|
|
| 44 | Assessment of fatigue and corrosion fatigue behaviours of the nitrogen ion implanted CpTi | International Journal of Fatigue | 1 April 2014 | Journal |
|
|
| 45 | Fatigue life prediction of commercially pure titanium after nitrogen ion implantation | International Journal of Automotive and Mechanical Engineering | 1 January 2013 | Journal |
|
|
| 46 | Assessment of CpTi surface properties after nitrogen ion implantation with various doses and energies | Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science | 1 November 2012 | Journal |
|
|
| 47 | Surface modification of pure titanium by nitrogen ion implantation at different beam energy and dose | Key Engineering Materials | 1 January 2011 | Book Series |
|
|
| 48 | Influence Of Processing Techniques On The Performance Of OutworDenim Fabric-reinforced Polymer Composites | Journal of Applied Science and Engineering | 15 July 2026 | Journal |
|
|
| 49 | Simpsonâs Paradox in the Engine Room: Unraveling Waste Generation on Training Ships | International Journal of Transport Development and Integration | 1 March 2026 | Journal |
|
|
| 50 | Development of an Incinerator-Based Waste Management Model for Marine Pollution Mitigation | Journal of Human Earth and Future | 1 March 2026 | Journal |
|
|
| 51 | Effect of Superheat on Hot Tearing Susceptibility in Re-melted 6061 Aluminum Alloy | International Journal of Metalcasting | 1 September 2025 | Journal |
|
|
| 52 | Design and experimental study of piezoelectric energy harvester integrated in rotating vehicle tire using end-cap system | Results in Engineering | 1 March 2025 | Journal |
|
|
| 53 | Variations in casting temperatures effect of re-melted 6061 aluminum alloy on tensile strength | Results in Materials | 1 June 2025 | Journal |
|
|
| 54 | Computational Analysis of Pressure Distribution of Traditional Aceh Boat Hull Attributed to Speed Variations | Journal of Maritime Research | 30 April 2025 | Journal |
|
|
| 55 | Efficiency of Syzygium cumini Fruit Extract as a Green Corrosion Inhibitor for Low Carbon Steel in Hydrochloric Acid Solution | Indonesian Journal of Chemistry | 1 January 2025 | Journal |
|
|
| 56 | Hot Tearing Evaluation of Al-0.9Mg-0.7Si Aluminium-cast Alloy | Archives of Foundry Engineering | 1 January 2025 | Journal |
|
|
| 57 | Evaluation of tensile strength of fibreglass composites-hybrid due to differences in sand size | Multidisciplinary Science Journal | 1 January 2024 | Journal |
|
|
| 58 | Investigating an environmentally in aqueous solution of potacium chloride | Journal of Materials Research and Technology | 1 March 2024 | Journal |
|
|
| 59 | Failure Analysis of the Minibus Crankshaft Using Experimental Methods | Lecture Notes in Mechanical Engineering | 1 January 2024 | Book Series |
|
|
| 60 | The Finite Element Method Simulation of Rear Driveshaft Failure in Trucks | Lecture Notes in Mechanical Engineering | 1 January 2024 | Book Series |
|
|
| 61 | Analysis of Temiki (Melastoma Candidum) Extract Compounds as Corrosion Inhibitors Using GCâMS | Lecture Notes in Mechanical Engineering | 1 January 2024 | Book Series |
|
|
| 62 | Failure Analysis of Leaf Spring Used as the Rear Suspension System in Diesel Truck by Numerical and Fracture Mechanics Approach | Lecture Notes in Mechanical Engineering | 1 January 2024 | Book Series |
|
|
| 63 | Experimental Study and Simulation of Light Truck Diesel Rear Suspension Failure | Lecture Notes in Mechanical Engineering | 1 January 2024 | Book Series |
|
|
| 64 | Assessment of Syzygium cumini (Jamblang) fruit extract as an eco-friendly corrosion inhibitor for low-carbon steel in 3.5% NaCl medium | International Journal of Corrosion and Scale Inhibition | 1 January 2024 | Journal |
|
|
| 65 | A rotating piezoelectric energy harvester in a spindle shaft under magnetic repulsive-attractive forces | International Journal of Ambient Energy | 1 January 2024 | Journal |
|
|
| No | Title | Publication | Date | Type | url | |
|---|---|---|---|---|---|---|
| 1 | The Atmospheric Corrosion of Structural Steel after Exposure in the Palm Oil Mill Industry Area of Aceh-Indonesia | INDONESIAN JOURNAL OF CHEMISTRY | AUG 2021 | Journal |
|
|
| 2 | EFFECT OF POURING TEMPERATURE ON IMPACT TOUGHNESS ON BRASS (Cu-Zn) THROUGH METAL CASTING | METALURGIJA | JUL 2021 | Journal |
|
|
| 3 | A Simple Empirical Model for Predicting Weight Loss of Mild Steel due to Corrosion in NaCl Solution | INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING | JAN-MAR 2020 | Journal |
|
|
| 4 | Study of leaf spring fracture behavior used in the suspension systems in the diesel truck vehicles | INTERNATIONAL SEMINAR ON METALLURGY AND MATERIALS | 2019 | Book in series |
|
|
| 5 | Fatigue Feature Clustering of Modified Automotive Strain Signals for Saving Testing Time | INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING | JUN 2018 | Journal |
|
|
| 6 | The Morlet Wavelet Transform for Reducing Fatigue Testing Time of an Automotive Suspension Signal | DISRUPTIVE INNOVATION IN MECHANICAL ENGINEERING FOR INDUSTRY COMPETITIVENESS | 2018 | Book in series |
|
|
| 7 | Effect Soil Resistivity in Mapping Potential Corrosion in Underground Pipelines Area | HUMAN-DEDICATED SUSTAINABLE PRODUCT AND PROCESS DESIGN: MATERIALS, RESOURCES, AND ENERGY | 2018 | Book in series |
|
|
| 8 | Monotonic and cyclic behavior of the nitrogen ion-implanted commercially pure-titanium | JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES | MAR 2021 | Journal |
|
|
| 9 | The empirical prediction of weight change and corrosion rate of low-carbon steel | HELIYON | SEP 2020 | Journal |
|
|
| 10 | Assessment of fatigue and corrosion fatigue behaviours of the nitrogen ion implanted CpTi | INTERNATIONAL JOURNAL OF FATIGUE | APR 2014 | Journal |
|
|
| 11 | FATIGUE LIFE PREDICTION OF COMMERCIALLY PURE TITANIUM AFTER NITROGEN ION IMPLANTATION | INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING | JAN-JUN 2013 | Journal |
|
|
| 12 | Assessment of CpTi Surface Properties after Nitrogen Ion Implantation with Various Doses and Energies | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | NOV 2012 | Journal |
|
|
| 13 | Surface Modification of Pure Titanium by Nitrogen Ion Implantation at Different Beam Energy and Dose | FRACTURE AND STRENGTH OF SOLIDS VII, PTS 1 AND 2 | 2011 | Book in series |
|
|
| No | Title | Publisher | Source | Date | url | |
|---|---|---|---|---|---|---|
| 1 | Perawatan Pompa Air untuk Sarana Air Bersih Mushalla Al-Muhajirin Desa Blang Krueng Kabupaten Aceh Besar | Lembaga Mitra Solusi Teknologi Informasi (L-MSTI) | AJAD : Jurnal Pengabdian kepada Masyarakat | 15 April 2023 |
|
|
| 2 | Perawatan Pompa Air untuk Sarana Air Bersih Mushalla Al-Muhajirin Desa Blang Krueng Kabupaten Aceh Besar | Lembaga Mitra Solusi Teknologi Informasi (L-MSTI) | AJAD : Jurnal Pengabdian kepada Masyarakat | 15 April 2023 |
|
|
| 3 | TESTING THE FLEXURAL PROPERTIES OF POLYMER COMPOSITES FOAMING HYBRID OIL PALM EMPTY FRUIT BUNCHES (OPEFB) AND ZINC OXIDE (ZnO) | Universitas Muhammadiyah Jakarta | SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin | 1 Desember 2020 |
|
|
| 4 | PEMETAAN POTENSI KOROSI PADA JALUR PIPA BAWAH TANAH MENGGUNAKAN INTERPOLASI KRIGING | Universitas Muhammadiyah Jakarta | Prosiding Semnastek | 5 Desember 2017 |
|
|
| 5 | The Atmospheric Corrosion of Structural Steel after Exposure in the Palm Oil Mill Industry Area of Aceh-Indonesia | Universitas Gadjah Mada | Indonesian Journal of Chemistry | 24 May 2021 |
|
|
| 6 | Usaha peningkatan pengetahuan metode pengelolaan sampah bagi santri Balai Pengajian Babussalam Gampong Limpok, Aceh Besar (Efforts to improve knowledge of waste management methods for students of the Quranic Recitation Hall Babussalam Limpok Village, Aceh Besar District) | The Institute for Research and Community Services (LPPM) Universitas Syiah Kuala (USK) | Buletin Pengabdian | 1 Desember 2021 |
|
|
| 7 | Perilaku Reduksi Briket Bijih Besi dan Batubara Peringkat Rendah Aceh | Chemical Engineering Department, Syiah Kuala University, Banda Aceh, Indonesia | Jurnal Rekayasa Kimia & Lingkungan | 18 May 2018 |
|
|
| 8 | Perilaku Reduksi Briket Bijih Besi dan Batubara Peringkat Rendah Aceh | Chemical Engineering Department, Syiah Kuala University, Banda Aceh, Indonesia | Jurnal Rekayasa Kimia & Lingkungan | 18 May 2018 |
|
|
| 9 | Penyuluhan Kesehatan Dan Keselamatan Bagi Para Ibu Rumah Tangga Di Desa Naga Umbang Kecamatan Lhoknga Aceh | Yayasan Kawanad | Kawanad : Jurnal Pengabdian kepada Masyarakat | 31 October 2023 |
|
|
| 10 | Comparative study of performance of temiki (Melastomacandidum) and rubek (Calotropis gigantea) extract inhibitors for carbon steel in corrosive media | Politeknik Negeri Lhokseumawe | Jurnal Polimesin | 31 Desember 2023 |
|
|
| 11 | Penerapan Teknologi Tepat Guna/Sasaran Berbasis Energi Terbarukan di Desa Alue Naga Kota Banda Aceh | Yayasan Kawanad | Kawanad : Jurnal Pengabdian kepada Masyarakat | 25 March 2022 |
|
|
| 12 | Usaha peningkatan pengetahuan metode pengelolaan sampah bagi santri Balai Pengajian Babussalam Gampong Limpok, Aceh Besar (Efforts to improve knowledge of waste management methods for students of the Quranic Recitation Hall Babussalam Limpok Village, Aceh Besar District) | The Institute for Research and Community Services (LPPM) Universitas Syiah Kuala (USK) | Buletin Pengabdian | 1 Desember 2021 |
|
|
| 13 | Perilaku Reduksi Briket Bijih Besi dan Batubara Peringkat Rendah Aceh | Chemical Engineering Department, Syiah Kuala University, Banda Aceh, Indonesia | Jurnal Rekayasa Kimia & Lingkungan | 18 May 2018 |
|
|
| No | Title | Publication | Year | url | |
|---|---|---|---|---|---|
| 1 | Impact of zinc oxide addition on oil palm empty fruit bunches foamed polymer composites for automotive interior parts | Polymers 15 (2), 422, 2023 | 2023 |
|
|
| 2 | The analysis of the failure of leaf spring used as the rear suspension system in 110 PS diesel trucks | AIP Conference Proceedings 2613 (1), 020001, 2023 | 2023 |
|
|
| 3 | Failure analysis of the rear driveshaft using experimental and analytical methods | AIP Conference Proceedings 2613 (1), 020004, 2023 | 2023 |
|
|
| 4 | Effect of variations in pouring temperature on tensile strength of CuZn cast alloys | Materials Letters: X 17, 100182, 2023 | 2023 |
|
|
| 5 | Perawatan Pompa Air untuk Sarana Air Bersih Mushalla Al-Muhajirin Desa Blang Krueng Kabupaten Aceh Besar | AJAD: Jurnal Pengabdian kepada Masyarakat 3 (1), 20-25, 2023 | 2023 |
|
|
| 6 | A review on the tensile properties of bamboo fiber treatments | 11TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING â¦, 2023 | 2023 |
|
|
| 7 | Learning Media for Basic Physics using Interactive Web-based Simulation | 2022 2nd International Conference on Information Technology and Education â¦, 2022 | 2022 |
|
|
| 8 | Penerapan Teknologi Tepat Guna/Sasaran Berbasis Energi Terbarukan di Desa Alue Naga Kota Banda Aceh | Kawanad: Jurnal Pengabdian kepada Masyarakat 1 (1), 10-16, 2022 | 2022 |
|
|
| 9 | Analysis of the leaf spring failure in light duty dump truck | Key Engineering Materials 930, 43-52, 2022 | 2022 |
|
|
| 10 | A Comparative Study on Corrosion Rate of Carbon Steel in NaCl Solution with Continuous and Discontinuous Weight Loss Methods | Key Engineering Materials 930, 35-41, 2022 | 2022 |
|
|
| 11 | Effect of Fibre Treatment on Tensile Properties in Bamboo Fibre Extraction: A Review Paper | Proceedings of 5th International Conference on Mechanical, System and …, 2022 | 2022 |
|
|
| 12 | Comparatif Study of Tensile Strength Experiment Results on Simulation of Abacus Software From AISI 1045 on Coil Spring Mobil Alvanza 2020 | Journal of Engineering and Science 1 (2), 56-71, 2022 | 2022 |
|
|
| 13 | Differences in Pour Temperature Affect Hardness Properties of CuZn Brass Alloy through Metal Casting | IOP Conference Series: Materials Science and Engineering 1082 (1), 012001, 2021 | 2021 |
|
|
| 14 | Monotonic and cyclic behavior of the nitrogen ion-implanted commercially pure-titanium | Journal of Mechanical Engineering and Sciences 15 (1), 7661â7670, 2021 | 2021 |
|
|
| 15 | Effect of pouring temperature on impact toughness on brass (Cu-Zn) through metal casting | Metalurgija 60 (3-4), 223-226, 2021 | 2021 |
|
|
| 16 | FAE Analysis of Boat Propeller with Differences of Loading Conditions and Manufacturing by Casting Process | Proceedings of the 2nd International Conference on Experimental and â¦, 2021 | 2021 |
|
|
| 17 | Failure analysis on the fracture shaft of a centrifugal pump used for diesel engine cooling system | Key Engineering Materials 892, 107-114, 2021 | 2021 |
|
|
| 18 | Failure analysis of a fractured leaf spring as the suspension system applied on the dump truck | Key Engineering Materials 892, 89-98, 2021 | 2021 |
|
|
| 19 | Failure analysis of the short drive shaft in a screw press machine | Key Engineering Materials 892, 74-80, 2021 | 2021 |
|
|
| 20 | Mapping Corrosivity Steel Construction at Atmospheric Conditions in Langsa Town Center and Palm Oil Mill Industry | Key Engineering Materials 892, 25-35, 2021 | 2021 |
|
|
| 21 | Comparison of Hardness and Microstructure of Cast Wheel and Spoke Wheel Rims of Motorcycles Made of Aluminum Alloy Alloy | Key Engineering Materials 892, 81-88, 2021 | 2021 |
|
|
| 22 | The Effect of Additional Zinc Oxide (ZnO) in Polymeric Foam Composites on Impact Strength | The 2nd International Conference on Science, Technology, and Modern Society â¦, 2021 | 2021 |
|
|
| 23 | Impact Loading on Material Composite Polymeric Foam Reinforced by Bagasse Fibers | Proceedings of the 2nd International Conference on Science, Technology, and â¦, 2021 | 2021 |
|
|
| 24 | The Atmospheric Corrosion of Structural Steel after Exposure in the Palm Oil Mill Industry Area of Aceh-Indonesia | Indonesian Journal of Chemistry 21 (4), 901-911, 2021 | 2021 |
|
|
| 25 | Effect of fibre treatment on tensile properties in bamboo fibre extraction: a review paper | International Conference on Mechanical, System and Control Engineer, 3-9, 2021 | 2021 |
|
|
| 26 | USAHA PENINGKATAN PENGETAHUAN METODE PENGELOLAAN SAMPAH BAGI SANTRI BALAI PENGAJIAN BABUSSALAM GAMPONG LIMPOK, ACEH BESAR | BULETIN PENGABDIAN 1 (3), 80-84, 2021 | 2021 |
|
|
| 27 | The Use of Jambé Kleng (Syzygium cumini) Seed Extracts as Green Corrosion Inhibitor for Low carbon steel | 2 nd Virtual Conference on Computational and Experimental Mechanics (VCCEM â¦, 2021 | 2021 |
|
|
| 28 | Experimental study the effect of reduction temperature of iron ore briquettes on minimum energy of reduction | Proceedings of the 2nd International Conference on Experimental and â¦, 2021 | 2021 |
|
|
| 29 | Failure analysis of spur gears used in transmission system applied on a hand tractor | Key Engineering Materials 841, 144-149, 2020 | 2020 |
|
|
| 30 | Effect of coal blended on the physical properties of iron ore briquette for direct reduction iron | Materials Science Forum 1000, 391-397, 2020 | 2020 |
|
|
| 31 | Fracture Surface of Polyester/Areca Nut Fiber Composite Under Impact and Tensile Loading | International Journal. 8 (6), 2020 | 2020 |
|
|
| 32 | Study on fracture failures of the super heater water pipe boiler | Defect and Diffusion Forum 402, 20-26, 2020 | 2020 |
|
|
| 33 | Effect of different gating systems and sand mold binder on the cast-quality of bicycle frame produced through sand casting method | Defect and diffusion forum 402, 100-107, 2020 | 2020 |
|
|
| 34 | The empirical prediction of weight change and corrosion rate of low-carbon steel | Heliyon 6 (9), 2020 | 2020 |
|
|
| 35 | Monte Carlo simulation of X-ray room shielding in diagnostic radiology using PHITS code | Journal of Radiation Research and Applied Sciences 13 (1), 704-713, 2020 | 2020 |
|
|
| 36 | TESTING THE FLEXURAL PROPERTIES OF POLYMER COMPOSITES FOAMING HYBRID OIL PALM EMPTY FRUIT BUNCHES (OPEFB) AND ZINC OXIDE (ZnO) | SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin 14 (2), 68-73, 2020 | 2020 |
|
|
| 37 | A simple empirical model for predicting weight loss of mild steel due to corrosion in NaCl solution | International Journal of Automotive and Mechanical Engineering 17 (1), 7784-7791, 2020 | 2020 |
|
|
| 38 | Differences in Pour Temperature Affect Hardness Properties of CuZn Brass Alloy through Metal Casting | IOP Conf. Series: Materials Science and Engineering 1082, 1-8, 2020 | 2020 |
|
|
| 39 | Dosimetric study of Rhizophora spp. particle board using gafchromic XRQA2 film | Malaysian Journal of Medicine and Health Sciences 16 (Supp 2, May), 46-50, 2020 | 2020 |
|
|
| 40 | Study on Mechanical Properties of Composite Polymeric Foams Reinforced by Bagasse Fibers | IOP Conference Series: Materials Science and Engineering 536 (1), 012023, 2019 | 2019 |
|
|
| 41 | Atmospheric corrosion assessment of structural steel exposed in the environment of palm oil processing (PKS) industry around coastal zone | IOP Conference Series: Materials Science and Engineering 536 (1), 012016, 2019 | 2019 |
|
|
| 42 | Corrosion Rate of Low Carbon Steel for Construction Materials in Various NaCl Concentrations | IOP Conference Series: Materials Science and Engineering 536 (1), 012015, 2019 | 2019 |
|
|
| 43 | Characterization of Polymeric Foam Composite Reinforced with Empty Fruit Bunch | IOP Conference Series: Materials Science and Engineering 536 (1), 012018, 2019 | 2019 |
|
|
| 44 | The effect of chemical composition on grain size and formability of the free-lead Cu-30Zn alloy: A short review | IOP Conference Series: Materials Science and Engineering 536 (1), 012019, 2019 | 2019 |
|
|
| 45 | Numerical analysis of the stress leading to fatigue failure on a coil spring of the front suspension of a car | IOP Conference Series: Materials Science and Engineering 523 (1), 012066, 2019 | 2019 |
|
|
| 46 | Analysis of surface failure of coil spring in passenger vehicle suspension system | IOP Conference Series: Materials Science and Engineering 523 (1), 012072, 2019 | 2019 |
|
|
| 47 | Failure analysis of the fracture surface of the crankshaft of a vehicle | IOP Conf. Series: Materials Science and Engineering 523 (1), 012067, 2019 | 2019 |
|
|
| 48 | Effects of welding on the change of microstructure and mechanical properties of low carbon steel | IOP Conf. Series: Materials Science and Engineering 523 (1), 012065, 2019 | 2019 |
|
|
| 49 | Study of leaf spring fracture behavior used in the suspension systems in the diesel truck vehicles | IOP Conf. Series: Materials Science and Engineering 541 (2019) 541 (1), 012046, 2019 | 2019 |
|
|
| 50 | The needs to investigate the effect of road surface vibrations to the fatigue life of a coil spring | IOP Conference Series: Materials Science and Engineering 602 (1), 012089, 2019 | 2019 |
|
|
| 51 | Failure analysis of the leaf spring of truck colt diesel using finite element method | IOP Conference Series: Materials Science and Engineering 547 (1), 012017, 2019 | 2019 |
|
|
| 52 | The Difference of Dopamine Transporter and Serotonin Transporter Level Between Addicted and Non-Addicted Internet User Experiencing Stress in Senior High School Students in … | 2019 |
|
|
|
| 53 | Determination of Rn-222 emanations from Kenaf composite brick | AIP Conference Proceedings 2068 (1), 2019 | 2019 |
|
|
| 54 | Effect soil resistivity in mapping potential corrosion in underground pipelines area | AIP Conference Proceedings 1977 (1), 040011, 2018 | 2018 |
|
|
| 55 | Pengaruh Pembebanan Tekan Terhadap Kekuatan Material Komposit diperkuat Serat Ampas Tebu | JURUTERA-Jurnal Umum Teknik Terapan 5 (01), 1-8, 2018 | 2018 |
|
|
| 56 | Pemetaan Laju Korosi Atmosferik Baja Konstruksi Di Industri Pabrik Kelapa Sawit;(Studi Kasus di PT Ensem Sawita) | JURUTERA-Jurnal Umum Teknik Terapan 5 (01), 15-21, 2018 | 2018 |
|
|
| 57 | Pengaruh Beban Tarik Terhadap Variasi Ukuran Serat Tandan Kosong Kelapa Sawit Terhadap Kekuatan Tarik Komposit Polymeric Foam | JURUTERA-Jurnal Umum Teknik Terapan 5 (01), 9-14, 2018 | 2018 |
|
|
| 58 | The Morlet wavelet transform for reducing fatigue testing time of an automotive suspension signal | AIP conference proceedings 1983 (1), 030003, 2018 | 2018 |
|
|
| 59 | Fatigue Feature Clustering of Modified Automotive Strain Signals for Saving Testing Time | International Journal of Automotive and Mechanical Engineering 15 (2), 5251-5272, 2018 | 2018 |
|
|
| 60 | Perilaku Reduksi Briket Bijih Besi dan Batubara Peringkat Rendah Aceh | Rekayasa Kimia dan Lingkungan 13 (1), 51-59, 2018 | 2018 |
|
|
| 61 | Perbandingan Kekerasan dan Struktur Mikro Pelek Cast Wheel dan Spoke Wheel Sepeda Motor Terbuat Dari Alumunium | Seminar Nasional Teknologi Rekayasa (SNTR) IV Tahun 2017 Politeknik Aceh â¦, 2018 | 2018 |
|
|
| 62 | Pemetaan Potensi Korosi Pada Jalur Pipa Bawah Tanah Menggunakan Interpolasi Kriging | Prosiding Semnastek, 2017 | 2017 |
|
|
| 63 | PENGARUH VARIASI KEDALAMAN ELEKTRODA DAN RESISTIVITAS TANAH DALAM MEMPREDIKSI POTENSI KOROSI DENGAN METODAWENNER | SEMINAR NASIONAL TEKNIK INDUSTRI [SNTI] 2017 3 (1), 111-116, 2017 | 2017 |
|
|
| 64 | Tensile Loading on Composite Polymeric Foam Reinforced by Empty Fruit Bunch Waste (EFB) | International Conference on Science, Technology and Modern Society 1 (1 â¦, 2017 | 2017 |
|
|
| 65 | Perbandingan Kekerasan dan Struktur Mikro Pelek Cast Wheel dan Spoke Wheel Sepeda Motor Terbuat Dari Alumunium | Seminar Nasional Teknologi Rekayasa (SNTR) IV Tahun 2017 Politeknik Aceh â¦, 2017 | 2017 |
|
|
| 66 | Perilaku Korosi Logam Las dan Daerah Terpengaruh Panas pada Baja A 36 | Seminar Nasional Teknologi dan Rekayasa 3, 38-42, 2016 | 2016 |
|
|
| 67 | Analisa Permukaan Patah Pegas Ulir Suspensi Depan Mobil Sedan | Proseding Seminar Nasional Teknologi Rekayasa (SNTR) 3, 111-117, 2016 | 2016 |
|
|
| 68 | Assessment of fatigue and corrosion fatigue behaviours of the nitrogen ion implanted CpTi | International Journal of Fatigue 61, 184-190, 2014 | 2014 |
|
|
| 69 | Analysis of Corrosion Fatigue for Commercially Pure Titanium Using Nitrogen Ion Implantation | Universiti Tun Hussein Onn Malaysia, 2014 | 2014 |
|
|
| 70 | Fatigue life prediction of commercially pure titanium after nitrogen ion implantation | International Journal of Automotive and Mechanical Engineering 7, 1005-1013, 2013 | 2013 |
|
|
| 71 | Assessment of CpTi surface properties after nitrogen ion implantation with various doses and energies | Metallurgical and Materials Transactions A 43 (11), 4185-4193, 2012 | 2012 |
|
|
| 72 | Surface modification of pure titanium by nitrogen ion implantation at different beam energy and dose | Key Engineering Materials 462, 750-755, 2011 | 2011 |
|
|
| 73 | Current Subject Limits | Saudi Journal of Biological Sciences 28, 10, 0 |
|
|
|
| 74 | Pengaruh Waktu Perendaman Dan Tebal Selimut Beton Terhadap Korosi Beton Bertulang Yang Terendam Air Laut |
|
|
||
| 75 | Development of an empirical model for predicting carbon steel corrosion rate using Melastoma candidum leaves extract an inhibitor | E3S Web of Conferences 695, 02003, 2026 | 2026 |
|
|
| 76 | Numerical modeling and performance analysis of sacrificial anode-based cathodic protection on underground pipelines using finite element method | Advances in Science and Technology. Research Journal 20 (5), 2026 | 2026 |
|
|
| 77 | Development of an empirical model for predicting carbon steel corrosion rate using Melastoma candidum leaves extract an inhibitor | E3S Web of Conferences 695, 02003, 2026 | 2026 |
|
|
| 78 | Numerical modeling and performance analysis of sacrificial anode-based cathodic protection on underground pipelines using finite element method | Advances in Science and Technology. Research Journal 20 (5), 2026 | 2026 |
|
|
| 79 | Design and experimental study of piezoelectric energy harvester integrated in rotating vehicle tire using end-cap system | Results in Engineering 25, 104195, 2025 | 2025 |
|
|
| 80 | Variations in casting temperatures effect of re-melted 6061 aluminum alloy on tensile strength | Results in Materials 26, 100691, 2025 | 2025 |
|
|
| 81 | Computational Analysis of Pressure Distribution of Traditional Aceh Boat Hull Attributed to Speed Variations | Journal of Maritime Research 22 (1), 232-239, 2025 | 2025 |
|
|
| 82 | Phytochemical Analysis and Antioxidant Properties of Syzygium cumini Fruit as a Corrosion Inhibitor | Construction Technologies and Architecture 18, 41-48, 2025 | 2025 |
|
|
| 83 | Experimental Fracture Failure Analysis of Superheater Water Pipe Boilers | Advanced Engineering Forum 56, 33-40, 2025 | 2025 |
|
|
| 84 | Pengembangan Ekstrak Tumbuhan Temiki (Melastoma Candidum) dan Rubik (Calotropis Giganteen) sebagai Inhibitor Korosi pada Baja Karbon dalam Larutan Sodium Klorida | USK Press, 2025 | 2025 |
|
|
| 85 | Hot tearing evaluation of Al-0.9 Mg-0.7 Si aluminium-cast alloy | Archives of Foundry Engineering, 74-80-74-80, 2025 | 2025 |
|
|
| 86 | Model Empiris: Teori dan Aplikasi | USK Press, 2025 | 2025 |
|
|
| 87 | Effect of superheat on hot tearing susceptibility in Re-melted 6061 aluminum alloy | International Journal of Metalcasting 19 (5), 2788-2805, 2025 | 2025 |
|
|
| 88 | Effect of superheat on hot tearing susceptibility in Re-melted 6061 aluminum alloy | International Journal of Metalcasting 19 (5), 2788-2805, 2025 | 2025 |
|
|
| 89 | Model Empiris: Teori dan Aplikasi | USK Press, 2025 | 2025 |
|
|
| 90 | Experimental Fracture Failure Analysis of Superheater Water Pipe Boilers | Advanced Engineering Forum 56, 33-40, 2025 | 2025 |
|
|
| 91 | Phytochemical Analysis and Antioxidant Properties of Syzygium cumini Fruit as a Corrosion Inhibitor | Construction Technologies and Architecture 18, 41-48, 2025 | 2025 |
|
|
| 92 | Pengembangan Ekstrak Tumbuhan Temiki (Melastoma Candidum) dan Rubik (Calotropis Giganteen) sebagai Inhibitor Korosi pada Baja Karbon dalam Larutan Sodium Klorida | USK Press, 2025 | 2025 |
|
|
| 93 | Variations in casting temperatures effect of re-melted 6061 aluminum alloy on tensile strength | Results in Materials 26, 100691, 2025 | 2025 |
|
|
| 94 | Computational Analysis of Pressure Distribution of Traditional Aceh Boat Hull Attributed to Speed Variations | Journal of Maritime Research 22 (1), 232-239, 2025 | 2025 |
|
|
| 95 | Design and experimental study of piezoelectric energy harvester integrated in rotating vehicle tire using end-cap system | Results in Engineering 25, 104195, 2025 | 2025 |
|
|
| 96 | Hot tearing evaluation of Al-0.9 Mg-0.7 Si aluminium-cast alloy | Archives of Foundry Engineering, 74-80-74-80, 2025 | 2025 |
|
|
| 97 | Efficiency of Syzygium cumini Fruit Extract as a Green Corrosion Inhibitor for Low Carbon Steel in Hydrochloric Acid Solution | Indonesian Journal of Chemistry 25 (3), 823-836, 2025 | 2025 |
|
|
| 98 | Efficiency of Syzygium cumini Fruit Extract as a Green Corrosion Inhibitor for Low Carbon Steel in Hydrochloric Acid Solution | Indonesian Journal of Chemistry 25 (3), 823-836, 2025 | 2025 |
|
|
| 99 | Investigating an environmentally in aqueous solution of potacium chloride | Journal of Materials Research and Technology 29, 303-310, 2024 | 2024 |
|
|
| 100 | Evaluation of tensile strength of fibreglass composites-hybrid due to differences in sand size | Multidisciplinary Science Journal 6 (6), 2024085-2024085, 2024 | 2024 |
|
|
| 101 | Penerapan Energi Terbarukan sebagai Sumber Energi Masyarakat Nelayan Lam Awe Aceh Besar | Kawanad: Jurnal Pengabdian kepada Masyarakat 3 (1), 56-61, 2024 | 2024 |
|
|
| 102 | A rotating piezoelectric energy harvester in a spindle shaft under magnetic repulsive-attractive forces | International Journal of Ambient Energy 45 (1), 2394826, 2024 | 2024 |
|
|
| 103 | Assessment of Syzygium cumini (Jamblang) fruit extract as an ecofriendly corrosion inhibitor for low-carbon steel in 3.5% NaCl medium | International Journal Corrosion. Scale Inhibitor 13 (1), 223-240, 2024 | 2024 |
|
|
| 104 | Effect of superheat on hot tearing susceptibility in Re-melted 6061 aluminum alloy | International Journal of Metalcasting, 1-18, 2024 | 2024 |
|
|
| 105 | STRUCTURAL FAILURE STUDY OF TRUCK REAR WHEEL DRIVE AXLE WITH DEFECT VARIATION USING FINITE ELEMENT METHOD | JURNAL POLIMESIN ??????????: Politeknik Negeri Lhokseumawe 22 (6), 565, 2024 | 2024 |
|
|
| 106 | Rehabilitasi Sistem Pompa Irigasi untuk Menjamin Ketersediaan Air pada Lahan Pertanian di Gampong Limpong, Kecamatan Darussalam | Kawanad: Jurnal Pengabdian kepada Masyarakat 3 (2), 102-109, 2024 | 2024 |
|
|
| 107 | Solid Pancreatic Lesions Visualized on Endoscopic Ultrasound in the Gulf Council Countries: An International Multicenter Study | Endoscopy 56 (S 02), eP498, 2024 | 2024 |
|
|
| 108 | Cystic Pancreatic Lesions Visualized on Endoscopic Ultrasound in the Gulf Council Countries: An International Multicenter Study | Endoscopy 56 (S 02), eP497, 2024 | 2024 |
|
|
| 109 | A rotating piezoelectric energy harvester in a spindle shaft under magnetic repulsive-attractive forces | International Journal of Ambient Energy 45 (1), 2394826, 2024 | 2024 |
|
|
| 110 | Rehabilitasi Sistem Pompa Irigasi untuk Menjamin Ketersediaan Air pada Lahan Pertanian di Gampong Limpong, Kecamatan Darussalam | Kawanad: Jurnal Pengabdian kepada Masyarakat 3 (2), 102-109, 2024 | 2024 |
|
|
| 111 | Penerapan Energi Terbarukan sebagai Sumber Energi Masyarakat Nelayan Lam Awe Aceh Besar | Kawanad: Jurnal Pengabdian kepada Masyarakat 3 (1), 56-61, 2024 | 2024 |
|
|
| 112 | Investigating an environmentally in aqueous solution of potacium chloride | Journal of Materials Research and Technology 29, 303-310, 2024 | 2024 |
|
|
| 113 | STRUCTURAL FAILURE STUDY OF TRUCK REAR WHEEL DRIVE AXLE WITH DEFECT VARIATION USING FINITE ELEMENT METHOD | JURNAL POLIMESIN ??????????: Politeknik Negeri Lhokseumawe 22 (6), 565, 2024 | 2024 |
|
|
| 114 | Assessment of Syzygium cumini (Jamblang) fruit extract as an ecofriendly corrosion inhibitor for low-carbon steel in 3.5% NaCl medium | International Journal Corrosion. Scale Inhibitor 13 (1), 223-240, 2024 | 2024 |
|
|
| 115 | Effect of hybridization of Ramie fibers on the vibrational and damping responses of Ramie/glass/epoxy resin composite laminates | Key Engineering Materials 951, 65-71, 2023 | 2023 |
|
|
| 116 | ANALISIS EKSPERIMENTAL KEGAGALAN SUSPENSI BELAKANG LIGHT TRUCK DIESEL | Jurnal Teknik Mesin-USK 11 (1), 13-17, 2023 | 2023 |
|
|
| 117 | Investigation of Mechanical Properties and Thermal Analysis of Bagasse Fiber Reinforced Composite Polymer Foam. | International Journal on Advanced Science, Engineering & Information â¦, 2023 | 2023 |
|
|
| 118 | Comparative study of performance of temiki (Melastomacandidum) and rubek (Calotropis gigantea) extract inhibitors for carbon steel in corrosive media | Jurnal Polimesin 21 (6), 583-588, 2023 | 2023 |
|
|
| 119 | Penyuluhan Kesehatan Dan Keselamatan Bagi Para Ibu Rumah Tangga Di Desa Naga Umbang Kecamatan Lhoknga Aceh | Kawanad: Jurnal Pengabdian kepada Masyarakat 2 (2), 165-169, 2023 | 2023 |
|
|
| 120 | Comparative study of performance of temiki (Melastomacandidum) and rubek (Calotropis gigantea) extract inhibitors for carbon steel in corrosive media | Jurnal Polimesin 21 (6), 583-588, 2023 | 2023 |
|
|
| 121 | Penyuluhan Kesehatan Dan Keselamatan Bagi Para Ibu Rumah Tangga Di Desa Naga Umbang Kecamatan Lhoknga Aceh | Kawanad: Jurnal Pengabdian kepada Masyarakat 2 (2), 165-169, 2023 | 2023 |
|
|
| 122 | Effect of hybridization of Ramie fibers on the vibrational and damping responses of Ramie/glass/epoxy resin composite laminates | Key Engineering Materials 951, 65-71, 2023 | 2023 |
|
|
| 123 | Investigation of Mechanical Properties and Thermal Analysis of Bagasse Fiber Reinforced Composite Polymer Foam. | International Journal on Advanced Science, Engineering & Information â¦, 2023 | 2023 |
|
|
| 124 | A review on the tensile properties of bamboo fiber treatments | 11TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING â¦, 2023 | 2023 |
|
|
| 125 | Perawatan Pompa Air untuk Sarana Air Bersih Mushalla Al-Muhajirin Desa Blang Krueng Kabupaten Aceh Besar | AJAD: Jurnal Pengabdian kepada Masyarakat 3 (1), 20-25, 2023 | 2023 |
|
|
| 126 | Effect of variations in pouring temperature on tensile strength of CuZn cast alloys | Materials Letters: X 17, 100182, 2023 | 2023 |
|
|
| 127 | The analysis of the failure of leaf spring used as the rear suspension system in 110 PS diesel trucks | AIP Conference Proceedings 2613 (1), 020001, 2023 | 2023 |
|
|
| 128 | Failure analysis of the rear driveshaft using experimental and analytical methods | AIP Conference Proceedings 2613 (1), 020004, 2023 | 2023 |
|
|
| 129 | Impact of zinc oxide addition on oil palm empty fruit bunches foamed polymer composites for automotive interior parts | Polymers 15 (2), 422, 2023 | 2023 |
|
|
| 130 | Analysis of Temiki (Melastoma Candidum) Extract Compounds as Corrosion Inhibitors Using GC–MS | International Conference on Experimental and Computational Mechanics in …, 2022 | 2022 |
|
|
| 131 | Experimental Study and Simulation of Light Truck Diesel Rear Suspension Failure | International Conference on Experimental and Computational Mechanics in â¦, 2022 | 2022 |
|
|
| 132 | Failure Analysis of the Minibus Crankshaft Using Experimental Methods | International Conference on Experimental and Computational Mechanics in â¦, 2022 | 2022 |
|
|
| 133 | Failure Analysis of Leaf Spring Used as the Rear Suspension System in Diesel Truck by Numerical and Fracture Mechanics Approach | International Conference on Experimental and Computational Mechanics in â¦, 2022 | 2022 |
|
|
| 134 | The Finite Element Method Simulation of Rear Driveshaft Failure in Trucks | International Conference on Experimental and Computational Mechanics in â¦, 2022 | 2022 |
|
|
| 135 | Failure Analysis on Leaf Spring of Dump Truck Using Experimental and Finite Element Methods | International Conference on Experimental and Computational Mechanics in â¦, 2022 | 2022 |
|
|
| 136 | Experimental Study of Helical Gear Failure in Off-Road 4à 4 Gearboxes | International Conference on Experimental and Computational Mechanics in â¦, 2022 | 2022 |
|
|
| 137 | The fracture of two-layer leaf spring: Experiments and simulation. IOP conference series: materials science and engineering | IOP Publishing 541 (1), 012046, 2022 | 2022 |
|
|
| 138 | Properties in Bamboo Fibre Extraction: A Review Paper | Proceedings of 5th International Conference on Mechanical, System and …, 2022 | 2022 |
|
|
| 139 | A Comparative Study on Corrosion Rate of Carbon Steel in NaCl Solution with Continuous and Discontinuous Weight Loss Methods | Key Engineering Materials 930, 35-41, 2022 | 2022 |
|
|
| 140 | Analysis of the leaf spring failure in light duty dump truck | Key Engineering Materials 930, 43-52, 2022 | 2022 |
|
|
| 141 | The Finite Element Method Simulation of Rear Driveshaft Failure in Trucks | International Conference on Experimental and Computational Mechanics in â¦, 2022 | 2022 |
|
|
| 142 | Failure Analysis on Leaf Spring of Dump Truck Using Experimental and Finite Element Methods | International Conference on Experimental and Computational Mechanics in â¦, 2022 | 2022 |
|
|
| 143 | Experimental Study of Helical Gear Failure in Off-Road 4à 4 Gearboxes | International Conference on Experimental and Computational Mechanics in â¦, 2022 | 2022 |
|
|
| 144 | Experimental Study and Simulation of Light Truck Diesel Rear Suspension Failure | International Conference on Experimental and Computational Mechanics in â¦, 2022 | 2022 |
|
|
| 145 | Failure Analysis of the Minibus Crankshaft Using Experimental Methods | International Conference on Experimental and Computational Mechanics in â¦, 2022 | 2022 |
|
|
| 146 | Failure Analysis of Leaf Spring Used as the Rear Suspension System in Diesel Truck by Numerical and Fracture Mechanics Approach | International Conference on Experimental and Computational Mechanics in â¦, 2022 | 2022 |
|
|
| 147 | Analysis of Temiki (Melastoma Candidum) Extract Compounds as Corrosion Inhibitors Using GCâMS | International Conference on Experimental and Computational Mechanics in â¦, 2022 | 2022 |
|
|
| 148 | Penerapan Teknologi Tepat Guna/Sasaran Berbasis Energi Terbarukan di Desa Alue Naga Kota Banda Aceh | JURNAL PENGABDIAN KEPADA MASYARAKAT 1 (1), 10-16, 2022 | 2022 |
|
|
| 149 | Learning Media for Basic Physics using Interactive Web-based Simulation | 2022 2nd International Conference on Information Technology and Education â¦, 2022 | 2022 |
|
|
| 150 | Analysis of Temiki (Melastoma Candidum) Extract Compounds as Corrosion Inhibitors Using GCâMS | International Conference on Experimental and Computational Mechanics in â¦, 2022 | 2022 |
|
|
| 151 | Efforts to improve knowledge of waste management methods for students of the quranic recitation hall Babussalam Limpok village, Aceh Besar district. | 2021 |
|
|
|
| 152 | Effect of different banana pseudostem parts on their starch yield, morphology and thermal properties | IOP Conference Series: Earth and Environmental Science 736 (1), 012038, 2021 | 2021 |
|
|
| 153 | The Use of Jambé Kleng (Syzygium cumini) Seed Extracts as Green Corrosion Inhibitor for Low carbon steel | 2 nd Virtual Conference on Computational and Experimental Mechanics (VCCEM â¦, 2021 | 2021 |
|
|
| 154 | Differences in Pour Temperature Affect Hardness Properties of CuZn Brass Alloy through Metal Casting | IOP Conference Series: Materials Science and Engineering 1082 (1), 012001, 2021 | 2021 |
|
|
| 155 | USAHA PENINGKATAN PENGETAHUAN METODE PENGELOLAAN SAMPAH BAGI SANTRI BALAI PENGAJIAN BABUSSALAM GAMPONG LIMPOK, ACEH BESAR | BULETIN PENGABDIAN 1 (3), 80-84, 2021 | 2021 |
|
|
| 156 | The Effect Of Additional Zinc Oxide (Zno) In Polymeric Foam Composites On Impact Strength | 2nd International Conference on Science, Technology, and Modern Society â¦, 2021 | 2021 |
|
|
| 157 | Mapping Corrosivity Steel Construction at Atmospheric Conditions in Langsa Town Center and Palm Oil Mill Industry | Key Engineering Materials 892, 25-35, 2021 | 2021 |
|
|
| 158 | Failure analysis on the fracture shaft of a centrifugal pump used for diesel engine cooling system | Key Engineering Materials 892, 107-114, 2021 | 2021 |
|
|
| 159 | Failure analysis of the short drive shaft in a screw press machine | Key Engineering Materials 892, 74-80, 2021 | 2021 |
|
|
| 160 | Failure analysis of a fractured leaf spring as the suspension system applied on the dump truck | Key Engineering Materials 892, 89-98, 2021 | 2021 |
|
|
| 161 | Comparison of Hardness and Microstructure of Cast Wheel and Spoke Wheel Rims of Motorcycles Made of Aluminum Alloy Alloy | Key Engineering Materials 892, 81-88, 2021 | 2021 |
|
|
| 162 | The Atmospheric Corrosion of Structural Steel after Exposure in the Palm Oil Mill Industry Area of Aceh-Indonesia | Indonesian Journal of Chemistry 21 (4), 901-911, 2021 | 2021 |
|
|
| 163 | Effect of pouring temperature on impact toughness on brass (Cu-Zn) through metal casting | Metalurgija 60 (3-4), 223-226, 2021 | 2021 |
|
|
| 164 | FAE Analysis of Boat Propeller with Differences of Loading Conditions and Manufacturing by Casting Process | Proceedings of the 2nd International Conference on Experimental and â¦, 2021 | 2021 |
|
|
| 165 | Experimental study the effect of reduction temperature of iron ore briquettes on minimum energy of reduction | Proceedings of the 2nd International Conference on Experimental and â¦, 2021 | 2021 |
|
|
| 166 | Effect of fibre treatment on tensile properties in bamboo fibre extraction: a review paper | International Conference on Mechanical, System and Control Engineer, 3-9, 2021 | 2021 |
|
|
| 167 | Monotonic and cyclic behavior of the nitrogen ion-implanted commercially pure-titanium | Journal of Mechanical Engineering and Sciences 15 (1), 7661â7670, 2021 | 2021 |
|
|
| 168 | Efforts to improve knowledge of waste management methods for students of the quranic recitation hall Babussalam Limpok village, Aceh Besar district. | 2021 |
|
|
|
| 169 | Impact Loading on Material Composite Polymeric Foam Reinforced by Bagasse Fibers | Proceedings of the 2nd International Conference on Science, Technology, and â¦, 2021 | 2021 |
|
|
| 170 | TESTING THE FLEXURAL PROPERTIES OF POLYMER COMPOSITES FOAMING HYBRID OIL PALM EMPTY FRUIT BUNCHES (OPEFB) AND ZINC OXIDE (ZnO) | SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin 14 (2), 68-73, 2020 | 2020 |
|
|
| 171 | The empirical prediction of weight change and corrosion rate of low-carbon steel | Heliyon 6 (9), 2020 | 2020 |
|
|
| 172 | Study on fracture failures of the super heater water pipe boiler | Defect and Diffusion Forum 402, 20-26, 2020 | 2020 |
|
|
| 173 | Effect of different gating systems and sand mold binder on the cast-quality of bicycle frame produced through sand casting method | Defect and diffusion forum 402, 100-107, 2020 | 2020 |
|
|
| 174 | Effect of coal blended on the physical properties of iron ore briquette for direct reduction iron | Materials Science Forum 1000, 391-397, 2020 | 2020 |
|
|
| 175 | Failure analysis of spur gears used in transmission system applied on a hand tractor | Key Engineering Materials 841, 144-149, 2020 | 2020 |
|
|
| 176 | Fracture Surface of Polyester/Areca Nut Fiber Composite Under Impact and Tensile Loading | International Journal. 8 (6), 2020 | 2020 |
|
|
| 177 | A simple empirical model for predicting weight loss of mild steel due to corrosion in NaCl solution | International Journal of Automotive and Mechanical Engineering 17 (1), 7784-7791, 2020 | 2020 |
|
|
| 178 | Differences in Pour Temperature Affect Hardness Properties of CuZn Brass Alloy through Metal Casting | IOP Conf. Series: Materials Science and Engineering 1082, 1-8, 2020 | 2020 |
|
|
| 179 | Iskandar, and S. Thalib,“Corrosion Rate of Low Carbon Steel for Construction Materials in Various NaCl Concentrations Corrosion Rate of Low Carbon Steel for Construction … | International Conference on Science and Innovated Engineering (I-COSINE), 1-6, 2019 | 2019 |
|
|
| 180 | No Underlying Cause: A Case of a Fatal Neuroendocrine Lung Tumor | Global Journal of Medical and Clinical Case Reports 6 (1), 012-014, 2019 | 2019 |
|
|
| 181 | Alejos, O., see Sanchez-Tejerina, L., TMAG Feb. 2019 7100104 Alejos, O., see Luis, RF, TMAG July 2019 1500408 Alghareb, FS, Zand, R., and Demara, RF, Non-Volatile Spintronic … | IEEE Transactions on Magnetics 55 (12), 2019 | 2019 |
|
|
| 182 | Failure analysis of the leaf spring of truck colt diesel using finite element method | IOP Conference Series: Materials Science and Engineering 547 (1), 012017, 2019 | 2019 |
|
|
| 183 | The needs to investigate the effect of road surface vibrations to the fatigue life of a coil spring | IOP Conference Series: Materials Science and Engineering 602 (1), 012089, 2019 | 2019 |
|
|
| 184 | Study of leaf spring fracture behavior used in the suspension systems in the diesel truck vehicles | IOP conference series: materials science and engineering 541 (1), 012046, 2019 | 2019 |
|
|
| 185 | Atmospheric corrosion assessment of structural steel exposed in the environment of palm oil processing (PKS) industry around coastal zone | IOP Conference Series: Materials Science and Engineering 536 (1), 012016, 2019 | 2019 |
|
|
| 186 | The effect of chemical composition on grain size and formability of the free-lead Cu-30Zn alloy: A short review | IOP Conference Series: Materials Science and Engineering 536 (1), 012019, 2019 | 2019 |
|
|
| 187 | Study on Mechanical Properties of Composite Polymeric Foams Reinforced by Bagasse Fibers | IOP Conference Series: Materials Science and Engineering 536 (1), 012023, 2019 | 2019 |
|
|
| 188 | Corrosion Rate of Low Carbon Steel for Construction Materials in Various NaCl Concentrations | IOP Conference Series: Materials Science and Engineering 536 (1), 012015, 2019 | 2019 |
|
|
| 189 | Characterization of Polymeric Foam Composite Reinforced with Empty Fruit Bunch | IOP Conference Series: Materials Science and Engineering 536 (1), 012018, 2019 | 2019 |
|
|
| 190 | Analysis of surface failure of coil spring in passenger vehicle suspension system | IOP Conference Series: Materials Science and Engineering 523 (1), 012072, 2019 | 2019 |
|
|
| 191 | Effects of welding on the change of microstructure and mechanical properties of low carbon steel | IOP Conference Series: Materials Science and Engineering 523 (1), 012065, 2019 | 2019 |
|
|
| 192 | Numerical analysis of the stress leading to fatigue failure on a coil spring of the front suspension of a car | IOP Conference Series: Materials Science and Engineering 523 (1), 012066, 2019 | 2019 |
|
|
| 193 | Failure analysis of the fracture surface of the crankshaft of a vehicle | IOP Conference Series: Materials Science and Engineering 523 (1), 012067, 2019 | 2019 |
|
|
| 194 | Iskandar, and S | Thalib,âCorrosion Rate of Low Carbon Steel for Construction Materials in â¦, 2019 | 2019 |
|
|
| 195 | Iskandar, and S | Thalib,âCorrosion Rate of Low Carbon Steel for Construction Materials in â¦, 2019 | 2019 |
|
|
| 196 | The Effect of Fiber Size of Oil Palm Empty Fruit Brunches to the Tensile Strength of the Polymeric Foam Composite | Int. J. Sci. Res 7 (7), 2319-7064, 2018 | 2018 |
|
|
| 197 | Web Themes & Templates | 2018 |
|
|
|
| 198 | Pemetaan Laju Korosi Atmosferik Baja Konstruksi Di Industri Pabrik Kelapa Sawit;(Studi Kasus di PT Ensem Sawita) | JURUTERA-Jurnal Umum Teknik Terapan 5 (01), 15-21, 2018 | 2018 |
|
|
| 199 | Pengaruh Pembebanan Tekan Terhadap Kekuatan Material Komposit diperkuat Serat Ampas Tebu | JURUTERA-Jurnal Umum Teknik Terapan 5 (01), 1-8, 2018 | 2018 |
|
|
| 200 | Pengaruh Beban Tarik Terhadap Variasi Ukuran Serat Tandan Kosong Kelapa Sawit Terhadap Kekuatan Tarik Komposit Polymeric Foam | JURUTERA-Jurnal Umum Teknik Terapan 5 (01), 9-14, 2018 | 2018 |
|
|
| 201 | The Morlet wavelet transform for reducing fatigue testing time of an automotive suspension signal | AIP conference proceedings 1983 (1), 030003, 2018 | 2018 |
|
|
| 202 | Effect soil resistivity in mapping potential corrosion in underground pipelines area | AIP Conference Proceedings 1977 (1), 040011, 2018 | 2018 |
|
|
| 203 | Perilaku Reduksi Briket Bijih Besi dan Batubara Peringkat Rendah Aceh | Rekayasa Kimia dan Lingkungan 13 (1), 51-59, 2018 | 2018 |
|
|
| 204 | Fatigue Feature Clustering of Modified Automotive Strain Signals for Saving Testing Time | International Journal of Automotive and Mechanical Engineering 15 (2), 5251-5272, 2018 | 2018 |
|
|
| 205 | Perbandingan Kekerasan dan Struktur Mikro Pelek Cast Wheel dan Spoke Wheel Sepeda Motor Terbuat Dari Alumunium | Seminar Nasional Teknologi Rekayasa (SNTR) IV Tahun 2017 Politeknik Aceh â¦, 2018 | 2018 |
|
|
| 206 | The Effect of Fiber Size of Oil Palm Empty Fruit Brunches to the Tensile Strength of the Polymeric Foam Composite | Int. J. Sci. Res 7 (7), 2319-7064, 2018 | 2018 |
|
|
| 207 | Pemetaan Potensi Korosi Pada Jalur Pipa Bawah Tanah Menggunakan Interpolasi Kriging | Prosiding Semnastek, 2017 | 2017 |
|
|
| 208 | PENGARUH VARIASI KEDALAMAN ELEKTRODA DAN RESISTIVITAS TANAH DALAM MEMPREDIKSI POTENSI KOROSI DENGAN METODAWENNER | SEMINAR NASIONAL TEKNIK INDUSTRI [SNTI] 2017 3 (1), 111-116, 2017 | 2017 |
|
|
| 209 | Tensile Loading on Composite Polymeric Foam Reinforced by Empty Fruit Bunch Waste (EFB) | International Conference on Science, Technology and Modern Society 1 (1 â¦, 2017 | 2017 |
|
|
| 210 | Perilaku Korosi Logam Las dan Daerah Terpengaruh Panas pada Baja A 36 | Seminar Nasional Teknologi dan Rekayasa 3, 38-42, 2016 | 2016 |
|
|
| 211 | Analisa Permukaan Patah Pegas Ulir Suspensi Depan Mobil Sedan | Proseding Seminar Nasional Teknologi Rekayasa (SNTR) 3, 111-117, 2016 | 2016 |
|
|
| 212 | Analysis of Corrosion Fatigue for Commercially Pure Titanium Using Nitrogen Ion Implantation | Universiti Tun Hussein Onn Malaysia, 2014 | 2014 |
|
|
| 213 | Assessment of fatigue and corrosion fatigue behaviours of the nitrogen ion implanted CpTi | International Journal of Fatigue 61, 184-190, 2014 | 2014 |
|
|
| 214 | Fatigue life prediction of commercially pure titanium after nitrogen ion implantation | International Journal of Automotive and Mechanical Engineering 7, 1005-1013, 2013 | 2013 |
|
|
| 215 | EP-1193 CLINICAL OUTCOME AND PATTERNS OF FAILURE IN NASOPHARYNGEAL CA: 5-YEARS EXPERIENCE AT TERTIARY HOSPITAL IN PAKISTAN | Radiotherapy and Oncology 103, S459, 2012 | 2012 |
|
|
| 216 | Assessment of CpTi surface properties after nitrogen ion implantation with various doses and energies | Metallurgical and Materials Transactions A 43 (11), 4185-4193, 2012 | 2012 |
|
|
| 217 | Surface modification of pure titanium by nitrogen ion implantation at different beam energy and dose | Key Engineering Materials 462, 750-755, 2011 | 2011 |
|
|
| 218 | 2009 index IEEE transactions on magnetics vol. 45 | IEEE Transactions on Magnetics 45 (12), 5417, 2009 | 2009 |
|
|
| 219 | 120 (P593). 135 (P667) Bahar. S. 167 (P8I8, P821) Bahr, RR 172 (P846) | Cerebrovasc Dis 6 (2), 179-192, 1996 | 1996 |
|
|
| 220 | Nitrate-nitrogen retarding the progress of jute retting | Bangladesh Journal of Jute and Fibre Research (Bangladesh) 3 (1-2), 1978 | 1978 |
|
|
| 221 | Differences in Pour Temperature Affect Hardness Properties of CuZn Brass Alloy through Metal Casting, IOP Conference Series | Materials Science and Engineering 1082, 0 |
|
|
|
| 222 | Efficiency of Syzygium cumini Fruit Extract as a Green Corrosion Inhibitor for Low Carbon Steel in Hydrochloric Acid Solution | Indonesian Journal of Chemistry, 0 |
|
|
|
| 223 | ANALISIS EKSPERIMENTAL KEGAGALAN SUSPENSI BELAKANG LIGHT TRUCK DIESEL |
|
|
||
| 224 | Numerical Modeling and Performance Analysis of Sacrificial Anode-Based Cathodic Protection on Underground Pipelines Using FEM | Advances in Science and Technology. Research Journal, 0 |
|
|
|
| 225 | ANALISIS EKSPERIMENTAL KEGAGALAN SUSPENSI BELAKANG LIGHT TRUCK DIESEL |
|
|
||
| 226 | Pengaruh Waktu Perendaman Dan Tebal Selimut Beton Terhadap Korosi Beton Bertulang Yang Terendam Air Laut |
|
|
||
| 227 | ANALISIS EKSPERIMENTAL KEGAGALAN SUSPENSI BELAKANG LIGHT TRUCK DIESEL |
|
|
||
| 228 | Pengaruh Waktu Perendaman Dan Tebal Selimut Beton Terhadap Korosi Beton Bertulang Yang Terendam Air Laut |
|
|
List of Research Works
| No | Title | Focus | Scheme | Year | |
|---|---|---|---|---|---|
| 1 | PENGEMBANGAN EKSTRAK TUMBUHAN TEMIKI (MELASTOMA CANDIDUM) DAN RUBIK (CALOTROPIS GIGANTEEN) SEBAGAI INHIBITOR KOROSI PADA BAJA KARBON DALAM LARUTAN SODIUM KLORIDA | Material Maju | Penelitian Disertasi Doktor | 2022 |
|
| 2 | KAJIAN EKSPERIMENTAL KARAKTERISTIK KOMPOSIT HYBRID SEBAGAI MATERIAL PEGAS DAUN | INDUSTRI, INOVASI, DAN INFRASTRUKTUR | PROGRAM RISET UNGGULAN USK PERCEPATAN DOKTOR | 2022 |
|
| 3 | ANALISIS KEGAGALAN RODA GIGI LURUS PADA SISTEM TRANSMISI YANG DIGUNAKAN PADA TRUK | INDUSTRI, INOVASI, DAN INFRASTRUKTUR | PENELITIAN PROFESOR | 2022 |
|
| 4 | ANALISIS KEGAGALAN PEGAS DAUN YANG DIGUANAKAN SEBAGAI SISTEM SUPENSI PADA TRUK SECARA EKSPERIMENTAL DAN METODE ELEMEN HINGGA | INTEGRASI FOKUS RISET ENERGI - ENERGI BARU DAN TERBARUKAN | PENELITIAN PROFESOR | 2021 |
|
| 5 | PENGEMBANGAN PROSES REDUKSI LANGSUNG BRIKET BIJI BESI BERBASIS BATUBARA MUDA UNTUK PENINGKATAN FE PADA BESI SPONGE. | ENERGI BARU DAN TERBARUKAN, MATERIAL MAJU, TEKNOLOGI INFORMASI DAN KOMUNIKASI | PENELITIAN PROFESOR | 2020 |
|
| 6 | PENGEMBANGAN METODE PENDETEKSIAN KERUSAKAN MATERIAL KOMPOSIT | ENERGI BARU DAN TERBARUKAN , MATERIAL MAJU | PENELITIAN LEKTOR | 2020 |
|
| 7 | ANALISIS KEGAGALAN POROS PENGGERAK MESIN KEMPA ULIR PADA PABRIK KELAPA SAWIT | ENERGI BARU DAN TERBARUKAN, MATERIAL MAJU, TEKNOLOGI INFORMASI DAN KOMUNIKASI | PENELITIAN PROFESOR | 2020 |
|
| 8 | ANALISA KEGAGALAN RODA GIGI LURUS YANG DIGUNAKAN PADA SISTEM TRANSMISI TRAKTOR TANGAN | ENERGI BARU DAN TERBARUKAN , MATERIAL MAJU | PENELITIAN PROFESOR | 2019 |
|
| 9 | PEMANFAATAN LIMBAH TANDAN KOSONG KELAPA SAWIT UNTUK PEMBUATAN KERUCUT LALULINTAS BERBAHAN KOMPOSIT POLIMER BERBUSA | Material Maju | Penelitian Kerjasama Antar Perguruan Tinggi | 2018 |
|
| 10 | PEMBUATAN DAN UJI KARAKTERISTIK AKUSTIK MATERIAL KOMPOSIT BATANG KELAPA SAWIT (Elaeis Guineensis) | Material Maju | Penelitian Strategis Nasional Institusi | 2017 |
|
| 11 | Evaluasi Sistem Proteksi Korosi Pipa Bawah Tanah Saluran River Water Intake Di Lhokseumawe | Kebencanaan | Penelitian Kerjasama Antar Perguruan Tinggi | 2017 |
|
| 12 | PEMANFAATAN LIMBAH TANDAN KOSONG KELAPA SAWIT UNTUK PEMBUATAN KERUCUT LALULINTAS BERBAHAN KOMPOSIT POLIMER BERBUSA | Material Maju | Penelitian Kerjasama Antar Perguruan Tinggi | 2017 |
|
| 13 | ANALISIS SISTEM PROTEKSI KATODIK ANODA KORBAN PADA INFRASTRUKTUR BAJA BERBASIS METODE KOMPUTASI | KEBENCANAAN | PENELITIAN PROFESOR | 2025 |
|
| 14 | Pemanfaatan Limbah Kulit Buah Cempedak (Artocarpus integer) sebagai green Inhibitor Korosi Baja Karbon dalam Larutan Korosif NaCl 3,5% | Produk rekayasa keteknikan | Penelitian Fundamental - Reguler | 2025 |
|
| 15 | EFISIENSI ADSORPSI DAN PARAMETER TERMODINAMIKA EKSTRAK DAUN TEMIKI (MELASTOMA CANDIDUM) SEBAGAI INHIBITOR KOROSI RAMAH LINGKUNGAN PADA BAJA KARBON RENDAH. | MATERIAL MAJU | PENELITIAN PROFESOR | 2025 |
|
| 16 | ANALISIS KARAKTERISTIK STATIK, DINAMIK, DAN FLAME RETARDANT PADA KOMPOSIT SERAT HIBRIDA LIMBAH MESOKARP/TEKSTIL DENGAN MODIFIKASI NANO SILIKA DAN AMMONIUM POLYPHOSPHATE | MATERIAL MAJU | PENELITIAN PROFESOR | 2025 |
|
| 17 | KAJIAN PERBANDINGAN METODE MANUFAKTUR STRUKTUR KOMPOSIT BERPENGUAT DENIM TERHADAP KARAKTERISTIK STATIK DAN DINAMIK | MATERIAL MAJU | PENELITIAN PROFESOR | 2024 |
|
| 18 | ANALISIS EKSTRAK BUAH SYZYGIUM CUMINI SEBAGAI GREEN INHIBITOR KOROSI PADA BAJA KARBON SAE 1020 DALAM MEDIA KOROSIF 1M HCL | MATERIAL MAJU | PENELITIAN PROFESOR | 2024 |
|
| 19 | STUDI KETAHANAN KOROSI ATMOSFERIK BAJA STRUKTURAL DENGAN PERLINDUNGAN COATING BERBASIS POLIMER DALAM LINGKUNGAN PESISIR KOTA BANDA ACEH | KEBENCANAAN | PENELITIAN LEKTOR KEPALA | 2024 |
|
| 20 | DESAIN DAN STUDI EKSPERIMENTAL SISTEM PEMANENAN ENERGI PIEZOELEKTRIK DENGAN PUTARAN DAN TEKANAN BAN KENDARAN | TRANSPORTASI | PROGRAM RISET UNGGULAN USK PERCEPATAN DOKTOR | 2024 |
|
| 21 | ANALISIS EFEKTIVITAS COATING BERBASIS POLIMER TERHADAP KETAHANAN KOROSI ATMOSFERIK PADA BAJA STRUKTURAL YANG DIPAPAR DALAM LINGKUNGAN PESISIR BANDA ACEH | KEBENCANAAN | PENELITIAN LEKTOR KEPALA | 2023 |
|
| 22 | STUDI PEMANFAATAN EKSTRAK BUAH JAMBLANG (SYZYGIUM CUMINI) SEBAGAI INHIBITOR KOROSI UNTUK BAJA KARBON RENDAH DALAM LARUTAN NACL | MATERIAL MAJU | PENELITIAN PROFESOR | 2023 |
|
| 23 | PENGEMBANGAN NANAGENERATOR TRIBOELEKTRIK DARI PEMANENAN ENERGI TEKANAN BAN KENDARAAN UNTUK SENSOR NIRKABEL BERTENAGA MANDIRI | ENERGI BARU DAN TERBARUKAN, DAN TRANSPORTASI | PROGRAM RISET UNGGULAN USK PERCEPATAN DOKTOR | 2023 |
|
List of Community Services
| No | Title | Focus | Scheme | Year |
|---|
List of IPRs
| No | Title | Publication Date | Category | Request Number |
|---|
List of Books
| No | Title | Publisher | Place | Category | ISBN | Year | |
|---|---|---|---|---|---|---|---|
| 1 | Kajian propeller untuk boat nelayan dari paduan logam kuningan (cu-zn) | Syiah Kuala University Press | Banda Aceh | buku referensi | 9786232647985 | 2023 |
|