Dr Ir ISKANDAR, S.T, M.Eng.Sc.
S2 - TEKNIK INDUSTRI
SINTA Score Overall
1.879
SINTA Score 3Year
507
Affiliation Score Overall
2.802.299.904
Affiliation Score 3Year
817.782.016
Authors Publication
Database Author
| Scopus | WOS | Garuda | GS | |
|---|---|---|---|---|
| Article | 64 | 21 | 14 | 158 |
| Citation | 319 | 107 | 0 | 819 |
| Cited Document | 46 | 13 | 0 | 96 |
| H-Index | 9 | 4 | 0 | 15 |
| i10-Index | 9 | 0 | 0 | 23 |
| G-Index | 1 | 0 | 0 | 1 |
List of Articles
| No | Title | Publication | Date | Type | URL | |
|---|---|---|---|---|---|---|
| 1 | Evaluation of cast defects in ship propeller of recycled aluminum alloy | Metalurgija | 1 April 2022 | Journal |
|
|
| 2 | The Failure Analysis of Crankshaft of Four Cylinder Diesel Engine Using Experimental Method | Key Engineering Materials | 1 January 2022 | Book Series |
|
|
| 3 | Numerical Analysis of Traditional Aceh Fishing Boat with Various Scenario Loading and Hull Thickness, Manufacturing by Metal Plasma Cutting and Welding | Lecture Notes in Mechanical Engineering | 1 January 2021 | Book Series |
|
|
| 4 | Stress and Strain Analysis of the Traditional Boat Jaloe Kayoh Made of Composite Materials with Centered Loading Using the Finite Element Method | Lecture Notes in Mechanical Engineering | 1 January 2021 | Book Series |
|
|
| 5 | The atmospheric corrosion of structural steel after exposure in the palm oil mill industry area of aceh-indonesia | Indonesian Journal of Chemistry | 1 January 2021 | Journal |
|
|
| 6 | Effect of vegetable oils as cutting fluid on wear of carbide cutting tool insert in a milling process | Iop Conference Series Materials Science and Engineering | 6 April 2020 | Conference Proceedin |
|
|
| 7 | Effects of strain rate due to SMAW welding on mechanical properties of AISI 1005 low alloy steel | Iop Conference Series Materials Science and Engineering | 1 July 2020 | Conference Proceedin |
|
|
| 8 | Fatigue life assessments of the aisi 1513 carbon steel subjected to road surface strains | Defect and Diffusion Forum | 1 January 2020 | Journal |
|
|
| 9 | Preface | Defect and Diffusion Forum | 1 January 2020 | Journal |
|
|
| 10 | Fatigue life assessments of the AISI 1513 carbon steel of a vehicle lower arm subjected to clockwise and counter-clockwise road strains | Defect and Diffusion Forum | 1 January 2020 | Journal |
|
|
| 11 | Fatigue life assessments of the sae 5160 carbon steel subjected to uphill and downhill roads strains | Defect and Diffusion Forum | 1 January 2020 | Journal |
|
|
| 12 | Effect of machining parameters on hole accuracy and burr formation in micro-drilling of brass | Defect and Diffusion Forum | 1 January 2020 | Journal |
|
|
| 13 | Biomechanical posture assessment of salted fish industry workers in west aceh | Iop Conference Series Materials Science and Engineering | 1 October 2020 | Conference Proceedin |
|
|
| 14 | Power density comparison of multi-air gap axial flux permanent magnet motor for electric vehicle | Iop Conference Series Materials Science and Engineering | 1 October 2020 | Conference Proceedin |
|
|
| 15 | Thrust force analysis of slotless permanent magnet linear generator for wave energy converter | Iop Conference Series Materials Science and Engineering | 1 October 2020 | Conference Proceedin |
|
|
| 16 | The design of rowing ergometer based on the anthropometry of acehnese male athletes | Iop Conference Series Materials Science and Engineering | 1 October 2020 | Conference Proceedin |
|
|
| 17 | Numerical analysis of the stress leading to fatigue failure on a coil spring of the front suspension of a car | Iop Conference Series Materials Science and Engineering | 8 July 2019 | Conference Proceedin |
|
|
| 18 | Mechanical behavior of hybrid glass Fiber-Jute reinforced with polymer composite for the wall of the Acehnese boat 'Jalo Kayoh' | Iop Conference Series Materials Science and Engineering | 8 July 2019 | Conference Proceedin |
|
|
| 19 | Mechanical properties of glass fiber reinforced polyester resin for use as the wall of the Acehnese boat 'Thep-Thep' | Iop Conference Series Materials Science and Engineering | 8 July 2019 | Conference Proceedin |
|
|
| 20 | Structural simulations of bicycle frame behaviour under various load conditions | Materials Science Forum | 1 January 2019 | Book Series |
|
|
| 21 | Analysis of cracks in the welded zone of stainless steel pipe used in high-pressure decomposer equipment | Iop Conference Series Materials Science and Engineering | 6 September 2019 | Conference Proceedin |
|
|
| 22 | Stress analysis on mechanical hand prototype with kinematics model approach and performance tests | Aip Conference Proceedings | 13 July 2018 | Conference Proceedin |
|
|
| 23 | A comparison of the structural strength between fiberglass and jute fiber in the Acehnese Traditional Boat Jalo Kayoh using finite element method | Iop Conference Series Materials Science and Engineering | 11 May 2018 | Conference Proceedin |
|
|
| 24 | Stress and strain analysis from dynamic loads of mechanical hand using finite element method | Iop Conference Series Materials Science and Engineering | 11 May 2018 | Conference Proceedin |
|
|
| 25 | Analysis of the Application of the Warehouse Receipt System (WRS) for Patchouli Oil Commodity | Lecture Notes in Mechanical Engineering | 1 January 2023 | Book Series |
|
|
| 26 | Risk Analysis of Domestic Egg-Laying Chicken Farms Using Z-Score and VAR (Value at Risk) Methods: âA Case Study: Chicken Farms in Nagan Raya Regencyâ | Lecture Notes in Mechanical Engineering | 1 January 2023 | Book Series |
|
|
| 27 | Analysis of Working Posture on Tofu Factory Operator Activities Using RULA Method and Virtual Engineering Software | Lecture Notes in Mechanical Engineering | 1 January 2023 | Book Series |
|
|
| 28 | Evaluation of properties of hybrid laminated composites with different fiber layers based on Coir/Al2O3 reinforced composites for structural application | Results in Engineering | 1 March 2023 | Journal |
|
|
| 29 | The Effect of Wearing Soccer Headgear on the Head Response in Soccer Heading | International Journal of Automotive and Mechanical Engineering | 1 January 2022 | Journal |
|
|
| 30 | The study on ergonomic performances based on workstation design parameters using virtual manufacturing tool | International Journal of Integrated Engineering | 1 January 2020 | Journal |
|
|
| 31 | The measurement of nurses' mental workload using NASA-TLX method (a case study) | Malaysian Journal of Public Health Medicine | 1 January 2020 | Journal |
|
|
| 32 | A simplified human head finite element model for brain injury a ssessment of blunt impacts | Journal of Mechanical Engineering and Sciences | 30 June 2020 | Journal |
|
|
| 33 | Body segment dimensions of indonesian male army | Iop Conference Series Materials Science and Engineering | 1 October 2020 | Conference Proceedin |
|
|
| 34 | Burnout Syndrome analysis among hospital nurses using Maslach Burnout Inventory - Human Service Survey (MBI-HSS): A case study | Iop Conference Series Materials Science and Engineering | 1 October 2020 | Conference Proceedin |
|
|
| 35 | The analysis of the approach run, take-off and flight angles in long jump | Sport Science | 1 January 2020 | Journal |
|
|
| 36 | Analysis of transport workers' postures in the loading process of manual material handling activities by using the photogrammetric method | Iop Conference Series Materials Science and Engineering | 8 July 2019 | Conference Proceedin |
|
|
| 37 | The potential biodiesel production from Cerbera odollam oil (Bintaro) in Aceh | Matec Web of Conferences | 30 March 2018 | Conference Proceedin |
|
|
| 38 | Analysis of protective headgear | Springerbriefs in Applied Sciences and Technology | 1 January 2018 | Book Series |
|
|
| 39 | Human head finite element model | Springerbriefs in Applied Sciences and Technology | 1 January 2018 | Book Series |
|
|
| 40 | Simulation of soccer heading manoeuvre | Springerbriefs in Applied Sciences and Technology | 1 January 2018 | Book Series |
|
|
| 41 | Soccer ball finite element model | Springerbriefs in Applied Sciences and Technology | 1 January 2018 | Book Series |
|
|
| 42 | Concussion in soccer | Springerbriefs in Applied Sciences and Technology | 1 January 2018 | Book Series |
|
|
| 43 | Experimental study on performance of the diesel engine fuelled by cerbera odollam oil biodiesel blends | International Journal of Smart Grid and Clean Energy | 1 October 2018 | Journal |
|
|
| 44 | The analysis of nursing's work systems in relation to burnout syndrome (A case study: Nurses in RSUDZA, BLUD RSIA, and RSUD Meuraxa, Banda Aceh, Indonesia) | Iop Conference Series Materials Science and Engineering | 29 November 2018 | Conference Proceedin |
|
|
| 45 | Analytical modelling of soccer heading | Sadhana Academy Proceedings in Engineering Sciences | 1 August 2015 | Journal |
|
|
| 46 | CFD Study of Drag and Lift of Sepak Takraw Ball at Different Face Orientations | Advances in Mechanical Engineering | 1 January 2015 | Journal |
|
|
| 47 | Impact-absorbing materials in reducing brain vibration caused by ball-to-head impact in soccer | Procedia Engineering | 1 January 2014 | Conference Proceedin |
|
|
| 48 | A review on the pattern of electricity generation and emission in Indonesia from 1987 to 2009 | Renewable and Sustainable Energy Reviews | 1 June 2012 | Journal |
|
|
| 49 | Energy and cost savings of optimal thickness for selected insulation materials and air gaps for building walls in tropical climate | Energy Education Science and Technology Part A Energy Science and Research | 1 April 2012 | Journal |
|
|
| 50 | A solar vehicle based on sustainable design concept | Proceedings of the IASTED International Conference on Solar Energy Soe 2009 | 1 Desember 2009 | Conference Proceedin |
|
|
| 51 | The effect of spherical hub-nose position on pressure drop in an oscillating water column system for wave energy conversion | Proceedings of the IASTED International Conference on Solar Energy Soe 2009 | 1 Desember 2009 | Conference Proceedin |
|
|
| 52 | Impact Analysis of Composite Laminate Structures in Traditional Jaloe Kayoh Boat Hulls | Polish Maritime Research | 1 September 2025 | Journal |
|
|
| 53 | Navigation Framework from a Monocular Camera for Autonomous Mobile Robots | Periodica Polytechnica Transportation Engineering | 15 August 2025 | Journal |
|
|
| 54 | Exploring the physical, mechanical, and thermal properties of oil palm trunk and ramie fiber hybrid bio composites as building insulation materials | Research on Engineering Structures and Materials | 1 August 2025 | Journal |
|
|
| 55 | University Students Stress Detection During Final Report Subject by Using NASA TLX Method and Logistic Regression | Jurnal Resti | 1 June 2025 | Journal |
|
|
| 56 | Application of Scirpus grossus fiber as a sound absorber | Heliyon | 15 April 2024 | Journal |
|
|
| 57 | The Determination Analysis of Anthropometry Dimensions for Ergonomics Electrical Energy-Based Vehicle Design | Aip Conference Proceedings | 23 February 2024 | Conference Proceedin |
|
|
| 58 | Effect of Perforated Aluminum on the Sound Absorption Ability of Calotropis gigantea Fiber Material | Lecture Notes in Mechanical Engineering | 1 January 2024 | Book Series |
|
|
| 59 | The Failure Analysis of Crankshaft of Four Cylinder Diesel Engine Using Numerical Method | Lecture Notes in Mechanical Engineering | 1 January 2024 | Book Series |
|
|
| 60 | Object Classification System Using Convolutional Neural Network for Several Environmental Conditions | Lecture Notes in Mechanical Engineering | 1 January 2024 | Book Series |
|
|
| 61 | A new CNN-BASED object detection system for autonomous mobile robots based on real-world vehicle datasets | Heliyon | 15 August 2024 | Journal |
|
|
| 62 | Good Manufacturing Practice (GMP) in Tofu MSMEs in North Aceh | Sinergi Indonesia | 1 January 2023 | Journal |
|
|
| 63 | MUSCULOSKELETAL DISORDERS RISK LEVELS IN TOFU WORKERS IN NORTH ACEH: AN ERGONOMIC ASSESSMENT | Journal of Applied Engineering and Technological Science | 10 Desember 2023 | Journal |
|
|
| 64 | Analyzing the Vibration Exposure to the Safety and Health at Workplace: A Case in the Urea Granulation Unit of the Fertilizer Factory | Jurnal Optimasi Sistem Industri | 1 November 2021 | Journal |
|
|
| No | Title | Publication | Date | Type | url | |
|---|---|---|---|---|---|---|
| 1 | EVALUATION OF CAST DEFECTS IN SHIP PROPELLER OF RECYCLED ALUMINUM ALLOY | METALURGIJA | APR 2022 | Journal |
|
|
| 2 | The Atmospheric Corrosion of Structural Steel after Exposure in the Palm Oil Mill Industry Area of Aceh-Indonesia | INDONESIAN JOURNAL OF CHEMISTRY | AUG 2021 | Journal |
|
|
| 3 | Stress Analysis on Mechanical Hand Prototype with Kinematics Model Approach and Performance Tests | DISRUPTIVE INNOVATION IN MECHANICAL ENGINEERING FOR INDUSTRY COMPETITIVENESS | 2018 | Book in series |
|
|
| 4 | Stress and strain analysis from dynamic loads of mechanical hand using finite element method | 7TH AIC-ICMR ON SCIENCES AND ENGINEERING 2017 | 2018 | Book in series |
|
|
| 5 | A comparison of the structural strength between fiberglass and jute fiber in the Acehnese Traditional Boat <i>Jalo Kayoh</i> using finite element method | 7TH AIC-ICMR ON SCIENCES AND ENGINEERING 2017 | 2018 | Book in series |
|
|
| 6 | Evaluation of properties of hybrid laminated composites with different fiber layers based on Coir/Al2O3 reinforced composites for structural application | RESULTS IN ENGINEERING | MAR 2023 | Journal |
|
|
| 7 | The Study on Ergonomic Performances Based on Workstation Design Parameters using Virtual Manufacturing Tool | INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING | 2020 | Journal |
|
|
| 8 | A simplified human head finite element model for brain injury assessment of blunt impacts | JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES | JUN 2020 | Journal |
|
|
| 9 | Analysis of Protective Headgear | MECHANICS OF SOCCER HEADING AND PROTECTIVE HEADGEAR | 2018 | Book in series |
|
|
| 10 | Simulation of Soccer Heading Manoeuvre | MECHANICS OF SOCCER HEADING AND PROTECTIVE HEADGEAR | 2018 | Book in series |
|
|
| 11 | Human Head Finite Element Model | MECHANICS OF SOCCER HEADING AND PROTECTIVE HEADGEAR | 2018 | Book in series |
|
|
| 12 | Soccer Ball Finite Element Model | MECHANICS OF SOCCER HEADING AND PROTECTIVE HEADGEAR | 2018 | Book in series |
|
|
| 13 | Concussion in Soccer | MECHANICS OF SOCCER HEADING AND PROTECTIVE HEADGEAR | 2018 | Book in series |
|
|
| 14 | The analysis of nursing's work systems in relation to burnout syndrome (A case study: nurses in RSUDZA, BLUD RSIA, and RSUD Meuraxa, Banda Aceh, Indonesia) | INTERNATIONAL CONFERENCE ON DESIGN, ENGINEERING AND COMPUTER SCIENCES | 2018 | Book in series |
|
|
| 15 | CFD Study of Drag and Lift of Sepak Takraw Ball at Different Face Orientations | ADVANCES IN MECHANICAL ENGINEERING | JAN 2015 | Journal |
|
|
| 16 | Analytical modelling of soccer heading | SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES | AUG 2015 | Journal |
|
|
| 17 | Impact-absorbing materials in reducing brain vibration caused by ball-to-head impact in soccer | ENGINEERING OF SPORT 10 | 2014 | Book in series |
|
|
| 18 | A review on the pattern of electricity generation and emission in Indonesia from 1987 to 2009 | RENEWABLE & SUSTAINABLE ENERGY REVIEWS | JUN 2012 | Journal |
|
|
| 19 | Energy and cost savings of optimal thickness for selected insulation materials and air gaps for building walls in tropical climate | ENERGY EDUCATION SCIENCE AND TECHNOLOGY PART A-ENERGY SCIENCE AND RESEARCH | APR 2012 | Journal |
|
|
| 20 | Application of Scirpus grossus fiber as a sound absorber | HELIYON | APR 15 2024 | Journal |
|
|
| 21 | A new CNN-BASED object detection system for autonomous mobile robots based on real-world vehicle datasets | HELIYON | AUG 15 2024 | Journal |
|
|
| No | Title | Publisher | Source | Date | url | |
|---|---|---|---|---|---|---|
| 1 | PERANCANGAN ICE COOL BOX MENGGUNAKAN BAHAN COMPOSITE (CBC) PADA KAPAL IKAN LAPIS FIBER 2 GT (GROSS TONNAGE) DALAM MASA KETAHANAN PANGAN DI MASA PANDEMI | Universitas Teuku Umar | Marine Kreatif | 22 November 2022 |
|
|
| 2 | Supply Chain Risk Mapping at ABC Cement Plant in Aceh, Indonesia | Graduate Program of Syiah Kuala University | Aceh International Journal of Science and Technology | 4 September 2022 |
|
|
| 3 | The Atmospheric Corrosion of Structural Steel after Exposure in the Palm Oil Mill Industry Area of Aceh-Indonesia | Universitas Gadjah Mada | Indonesian Journal of Chemistry | 24 May 2021 |
|
|
| 4 | PEMBUATAN BOAT IKAN 2 GT (GROSS TONNAGE) BAGI NELAYAN ACEH UNTUK PENINGKATAN TANGKAPAN IKAN MENUJU KETAHANAN PANGAN SELAMA PANDEMI COVID 19 | Universitas Teuku Umar | Jurnal Marine Kreatif | 1 October 2021 |
|
|
| 5 | Desain dan Analisis Rangka Mobil Listrik Malem Diwa X.2 Model Prototype Menggunakan Metode Elemen Hingga | Jurnal Teknik Mesin Unsyiah | Jurnal Teknik Mesin Unsyiah | 11 July 2019 |
|
|
| 6 | Pengembangan Sistem Pengukuran Gaya Tumbukan pada Jurus Pukulan Datar Pencak Silat Menggunakan Sistem Strain Gauge | Jurnal Teknik Mesin Unsyiah | Jurnal Teknik Mesin Unsyiah | 7 October 2020 |
|
|
| 7 | Analisis Dinamis Tegangan, Regangan, dan Displacement Badan Perahu Jaloe Kayoh Berbahan Material Komposit dengan Pembebanan Merata Menggunakan Metode Elemen Hingga | Jurnal Teknik Mesin Unsyiah | Jurnal Teknik Mesin Unsyiah | 7 October 2020 |
|
|
| 8 | PENGARUH LEBAR SERAT ABAKA SEBAGAI MATERIAL NFRP UNTUK KUAT GESER BALOK BETON BERTULANG | Prodi Magister Teknik Sipil Unsyiah | Jurnal Arsip Rekayasa Sipil dan Perencanaan | 30 March 2022 |
|
|
| 9 | Pengabdian Kepada Masyarakat Dengan Pendekatan Bakti Sosial dan Pelaksanaan Pelatihan Secara Berkelanjutan | Universitas Teuku Umar | Jurnal Pengabdian Masyarakat: Darma Bakti Teuku Umar | 4 July 2022 |
|
|
| 10 | Analyzing the Vibration Exposure to the Safety and Health at Workplace: A Case in the Urea Granulation Unit of the Fertilizer Factory | The Industrial Engineering Department of Engineering Faculty at Universitas Andalas | Jurnal Optimasi Sistem Industri | 29 November 2021 |
|
|
| 11 | Analysis of posture and level of complaints in the Aceh coffee brewing process for the design of work tools planning | Politeknik Negeri Lhokseumawe | Jurnal POLIMESIN | 28 February 2021 |
|
|
| 12 | The Effect of Working Environment and Motivation towards Laborsâ Performance: A Case Study in Aceh at PT Pupuk Iskandar Muda | Graduate Program of Syiah Kuala University | Aceh International Journal of Science and Technology | 9 May 2019 |
|
|
| 13 | The Effect of Working Environment and Motivation towards Laborsâ Performance: A Case Study in Aceh at PT Pupuk Iskandar Muda | Graduate Program of Syiah Kuala University | Aceh International Journal of Science and Technology | 9 May 2019 |
|
|
| 14 | Evaluasi Shift Kerja dan Penentuan Waktu Standar PT X Berdasarkan Beban Kerja | The Industrial Engineering Department of Engineering Faculty at Universitas Andalas | Jurnal Optimasi Sistem Industri | 1 April 2016 |
|
|
| 15 | Effect of Scirpus grossus fiber density on acoustic absorption characteristics for insulation use | Politeknik Negeri Lhokseumawe | Jurnal Polimesin | 30 June 2025 |
|
|
| 16 | Investigating the Effects of Solution Treatment Parameters and Artificial Aging on Hardness Improvement of Precipitation-Hardened 6061 Aluminum Alloy | Politeknik Negeri Lhokseumawe | Jurnal Polimesin | 31 August 2025 |
|
|
| 17 | Visual place recognition for autonomous mobile robot navigation using LoFTR and MAGSAC++ | Politeknik Negeri Lhokseumawe | Jurnal Polimesin | 30 April 2024 |
|
|
| 18 | PENGARUH SISTEM KERJA TIDAK ERGONOMIS TERHADAP POSTUR TUBUH NELAYAN | Fakultas Teknik Universitas Islam Sumatera Utara | Prosiding Seminar Nasional Teknik UISU (SEMNASTEK) | 20 June 2023 |
|
|
| 19 | The development of a wearable device for Sign Language Gesture Recognition (SLGR) by using Conceptual Design Approach (CDA) | Politeknik Negeri Lhokseumawe | Jurnal POLIMESIN | 28 August 2023 |
|
|
| 20 | Optimization process of the truss structure using Finite Element Analysis: Step by step from 2D to 3D space | Politeknik Negeri Lhokseumawe | Jurnal POLIMESIN | 28 August 2023 |
|
|
| 21 | Musculoskeletal Disorders Risk Levels in Tofu Workers in North Aceh: An Ergonomic Assessment | Yayasan Riset dan Pengembangan Intelektual (YRPI) | Journal of Applied Engineering and Technological Science (JAETS) | 14 Desember 2023 |
|
|
| 22 | PKM PERBAIKAN KEHIDUPAN PEMULUNG UNTUK MENINGKATKAN PENDAPATAN MELALUI PEMANFAATAN SUMBER DAYA ALAM | Universitas Muhammadiyah Tapanuli Selatan | Martabe : Jurnal Pengabdian Kepada Masyarakat | 23 November 2023 |
|
|
| 23 | The development of a wearable device for Sign Language Gesture Recognition (SLGR) by using Conceptual Design Approach (CDA) | Politeknik Negeri Lhokseumawe | Jurnal POLIMESIN | 28 August 2023 |
|
|
| 24 | Optimization process of the truss structure using Finite Element Analysis: Step by step from 2D to 3D space | Politeknik Negeri Lhokseumawe | Jurnal POLIMESIN | 28 August 2023 |
|
|
| 25 | Melinjo fruit outer skin peeler prototype design using grate roller based-on auto reverse movement control | Politeknik Negeri Lhokseumawe | Jurnal Polimesin | 31 Desember 2023 |
|
|
| 26 | Analyzing the Vibration Exposure to the Safety and Health at Workplace: A Case in the Urea Granulation Unit of the Fertilizer Factory | The Industrial Engineering Department of Engineering Faculty at Universitas Andalas | Jurnal Optimasi Sistem Industri | 29 November 2021 |
|
|
| 27 | Desain dan Analisis Artificial Exoskeleton pada Prajurit TNI | The Industrial Engineering Department of Engineering Faculty at Universitas Andalas | Jurnal Optimasi Sistem Industri | 30 October 2018 |
|
|
| 28 | PENGARUH MEWARNAI MANDALA TERHADAP MENURUNNYA KECEMASAN PADA MAHASISWA DI BANDA ACEH | Program Studi Psikologi, Fakultas Kedokteran, Universitas Syiah Kuala | Seurune : Jurnal Psikologi Unsyiah | 1 August 2019 |
|
|
| No | Title | Publication | Year | url | |
|---|---|---|---|---|---|
| 1 | Analysis of Working Posture on Tofu Factory Operator Activities Using RULA Method and Virtual Engineering Software | International Conference on Experimental and Computational Mechanics in …, 2023 | 2023 |
|
|
| 2 | Analysis of the Application of the Warehouse Receipt System (WRS) for Patchouli Oil Commodity | International Conference on Experimental and Computational Mechanics in …, 2023 | 2023 |
|
|
| 3 | Risk Analysis of Domestic Egg-Laying Chicken Farms Using Z-Score and VAR (Value at Risk) Methods | International Conference on Experimental and Computational Mechanics in …, 2023 | 2023 |
|
|
| 4 | Evaluation of properties of hybrid laminated composites with different fiber layers based on Coir/Al2O3 reinforced composites for structural application | Results in Engineering 17, 100948, 2023 | 2023 |
|
|
| 5 | Implementation of PID controller on Hohenheim tunnel dryer using Ziegler-Nichols Approach method | Jurnal Polimesin, 101-107, 2023 | 2023 |
|
|
| 6 | Optimization of the jaloe kayoh seat design using the quality function deployment (QFD) method based on anthropometric measurements of the Acehnese Society | Jurnal Polimesin 21 (2), 2023 | 2023 |
|
|
| 7 | Perancangan Ulang Kursi Rotan Berdasarkan Pengukuran Data Antropometri (Studi Kasus CV Karya Trieng) | Journal of Industrial Science and Technology 4 (1), 2023 | 2023 |
|
|
| 8 | Analisa Pengukuran Antropometri Telapak Tangan (Studi Kasus Pada Pengguna Kawat Gigi di Kota Banda Aceh) | Journal of Industrial Science and Technology 4 (2), 1-4, 2023 | 2023 |
|
|
| 9 | Analisis Uji Usabilitas Pada Website Pendaftaran MBKM Prodi Teknik Industri Studi Kasus: Universitas Syiah Kuala | Industrika : Jurnal Ilmiah Teknik Industri 7 (1), 13-20, 2023 | 2023 |
|
|
| 10 | Evaluation of cast defects in ship propeller of recycled aluminum alloy | Metalurgija 61 (2), 309-312, 2022 | 2022 |
|
|
| 11 | PENGARUH LEBAR SERAT ABAKA SEBAGAI MATERIAL NFRP UNTUK KUAT GESER BALOK BETON BERTULANG | Jurnal Arsip Rekayasa Sipil dan Perencanaan 5 (1), 8-15, 2022 | 2022 |
|
|
| 12 | Pengembangan Smart Plane Untuk Mapping Lahan Pertanian dan Perikanan Dalam Rangka Memperkuat Ketahanan Pangan | Jurnal Pengabdian Aceh 2 (1), 1-8, 2022 | 2022 |
|
|
| 13 | Pengabdian Kepada Masyarakat Dengan Pendekatan Bakti Sosial dan Pelaksanaan Pelatihan Secara Berkelanjutan | Jurnal Pengabdian Masyarakat: Darma Bakti Teuku Umar 4 (1), 1-15, 2022 | 2022 |
|
|
| 14 | The Failure Analysis of Crankshaft of Four Cylinder Diesel Engine Using Experimental Method | Key Engineering Materials 930, p. 25-33, 2022 | 2022 |
|
|
| 15 | Supply chain risk mapping at abc cement plant in aceh, indonesia | Aceh International Journal of Science and Technology 11 (2), 128-135, 2022 | 2022 |
|
|
| 16 | Finite Element Analysis of the Jaloe kayoh Boat Structure with Load Variations by Using E-Glass and Ramie Fiber Composite Materials | Key Engineering Materials 930, 61-70, 2022 | 2022 |
|
|
| 17 | A Comparative Study on Corrosion Rate of Carbon Steel in NaCl Solution with Continuous and Discontinuous Weight Loss Methods | Key Engineering Materials 930, 35-41, 2022 | 2022 |
|
|
| 18 | The Effect of Wearing Soccer Headgear on the Head Response in Soccer Heading | International Journal of Automotive and Mechanical Engineering 19 (4), 10112Â …, 2022 | 2022 |
|
|
| 19 | Perancangan ice cool box menggunakan bahan composite (CBC) pada kapal ikan lapis fiber 2 GT (Gross Tonnage) dalam masa ketahanan pangan di masa pandemi | Marine Kreatif 6 (2), 76-85, 2022 | 2022 |
|
|
| 20 | The effect of foam padding on the head response in soccer heading | Malaysian Journal of Movement, Health & Exercise 11 (2), 108, 2022 | 2022 |
|
|
| 21 | Number of layer effect of abaca fiber as natural FRP material for shear-strengthened reinforced concrete beam | IOP Conference Series: Materials Science and Engineering 1087 (1), 012006, 2021 | 2021 |
|
|
| 22 | An experimental study on bond strength of abaca fiber as natural FRP material | IOP Conference Series: Materials Science and Engineering 1087 (1), 012020, 2021 | 2021 |
|
|
| 23 | Working posture analysis of wall building activities in construction works using the OWAS method | IOP Conference Series: Materials Science and Engineering 1082 (1), 012008, 2021 | 2021 |
|
|
| 24 | Teknologi Manufaktur Perahu Penangkap Ikan Berbahan Komposit Matrik Thermosetting | Jurnal Pengabdian Aceh 1 (1), 19-25, 2021 | 2021 |
|
|
| 25 | Analysis of posture and level of complaints in the Aceh coffee brewing process for the design of work tools planning | Jurnal POLIMESIN 19 (1), 88-97, 2021 | 2021 |
|
|
| 26 | Stress and Strain Analysis of the Traditional Boat <i>Jaloe Kayoh</i> Made of Composite Materials with Centered Loading Using the Finite Element Method | Proceedings of the 2nd International Conference on Experimental and … | 2021 |
|
|
| 27 | Stress and Strain Analysis of the Traditional Boat Jaloe Kayoh Made of Composite Materials with Centered Loading Using the Finite Element Method | Proceedings of the 2nd International Conference on Experimental and …, 2021 | 2021 |
|
|
| 28 | Numerical Analysis of Traditional Aceh Fishing Boat with Various Scenario Loading and Hull Thickness, Manufacturing by Metal Plasma Cutting and Welding | Proceedings of the 2nd International Conference on Experimental and â¦, 2021 | 2021 |
|
|
| 29 | Pembuatan Boat Ikan 2 Gt (Gross Tonnage) Bagi Nelayan Aceh Untuk Peningkatan Tangkapan Ikan Menuju Ketahanan Pangan Selama Pandemi Covid 19 | Marine Kreatif 5 (2), 2021 | 2021 |
|
|
| 30 | Analyzing the Vibration Exposure to the Safety and Health at Workplace: A Case in the Urea Granulation Unit of the Fertilizer Factory | Jurnal Optimasi Sistem Industri 20 (2), 115-124, 2021 | 2021 |
|
|
| 31 | The Atmospheric Corrosion of Structural Steel after Exposure in the Palm Oil Mill Industry Area of Aceh-Indonesia | Indonesian Journal of Chemistry 21 (4), 901-911, 2021 | 2021 |
|
|
| 32 | Effect of vegetable oils as cutting fluid on wear of carbide cutting tool insert in a milling process | IOP Conference Series: Materials Science and Engineering 796 (1), 012001, 2020 | 2020 |
|
|
| 33 | Effects of strain rate due to SMAW welding on mechanical properties of AISI 1005 low alloy steel | IOP Conference Series: Materials Science and Engineering 854 (1), pp. 012004, 2020 | 2020 |
|
|
| 34 | The Study on Ergonomic Performances Based on Workstation Design Parameters using Virtual Manufacturing Tool | INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING 12 (5), 124-129, 2020 | 2020 |
|
|
| 35 | Fatigue Life Assessments of the AISI 1513 Carbon Steel of a Vehicle Lower Arm Subjected to Clockwise and Counter-Clockwise Road Strains | Defect and Diffusion Forum 402, pp.45-49, 2020 | 2020 |
|
|
| 36 | Fatigue Life Assessments of the AISI 1513 Carbon Steel Subjected to Road Surface Strains | Defect and Diffusion Forum 402, pp. 39-44, 2020 | 2020 |
|
|
| 37 | Fatigue Life Assessments of the SAE 5160 Carbon Steel Subjected to Uphill and Downhill Roads Strains | Defect and Diffusion Forum 402, pp. 33-38, 2020 | 2020 |
|
|
| 38 | Effect of machining parameters on hole accuracy and burr formation in micro-drilling of brass | Defect and Diffusion Forum 402, 73-80, 2020 | 2020 |
|
|
| 39 | Advanced Technologies in Material Processing | Trans Tech Publications Ltd, 2020 | 2020 |
|
|
| 40 | THE MEASUREMENT OF NURSES’ MENTAL WORKLOAD USING NASA-TLX METHOD (A CASE STUDY) | Malaysian Journal of Public Health Medicine 20 (Special Volume (1)), 60-63, 2020 | 2020 |
|
|
| 41 | Body Segment Dimensions of Indonesian Male Army | IOP Conf. Series: Materials Science and Engineering 931 (1), 1-7, 2020 | 2020 |
|
|
| 42 | Biomechanical Posture Assessment of Salted Fish Industry Workers in West Aceh | IOP Conference Series: Materials Science and Engineering 931 (1), 012021, 2020 | 2020 |
|
|
| 43 | Burnout Syndrome analysis among hospital nurses using Maslach Burnout Inventory - Human Service Survey (MBI-HSS): a case study | IOP Conf. Series: Materials Science and Engineering 931 (1), 1-8, 2020 | 2020 |
|
|
| 44 | The Design of Rowing Ergometer Based on the Anthropometry of Acehnese Male Athletes | IOP Conf. Series: Materials Science and Engineering 931 (1), pp. 012022, 2020 | 2020 |
|
|
| 45 | Thrust Force Analysis of Slotless Permanent Magnet Linear Generator for Wave Energy Converter | IOP Conf. Series: Materials Science and Engineering 931 (1), 1-7, 2020 | 2020 |
|
|
| 46 | Power density comparison of multi-air gap axial flux permanent magnet motor for electric vehicle | IOP Conf. Series: Materials Science and Engineering 931 (1), 1-6, 2020 | 2020 |
|
|
| 47 | Penentuan Dimensi Meja Dan Kursi Yang Ergonomis Dengan Metode Antropometri Dan Menggunakan Data Statistik Analisis | Jurnal Nasional Komputasi dan Teknologi Informasi (JNKTI) 3 (2), 75-79, 2020 | 2020 |
|
|
| 48 | Perencanaan Ulang Tata Letak Fasilitas Produksi (Studi Kasus: UKM Pengolahan Ikan Asin Stefen Aluy-Meulaboh) | Jurnal Optimalisasi 6 (2), 121-130, 2020 | 2020 |
|
|
| 49 | THE ANALYSIS OF THE APPROACH RUN, TAKE-OFF AND FLIGHT ANGLES IN LONG JUMP | SPORT Science 13 (2), 125-133, 2020 | 2020 |
|
|
| 50 | A simplified human head finite element model for brain injury assessment of blunt impacts | JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES (JMES) 14 (No 2 (2020): June …, 2020 | 2020 |
|
|
| 51 | The Effect of Working Environment and Motivation towards Labors’ Performance: A Case Study in Aceh at PT Pupuk Iskandar Muda | Aceh International Journal of Science and Technology 8 (1), 35-40, 2019 | 2019 |
|
|
| 52 | Desain dan Analisis Rangka Mobil Listrik Malem Diwa X. 2 Model Prototype Menggunakan Metode Elemen Hingga | Jurnal Teknik Mesin 7 (1), 10-14, 2019 | 2019 |
|
|
| 53 | Mechanical properties of glass fiber reinforced polyester resin for use as the wall of the Acehnese boat ‘Thep-Thep’ | IOP Conference Series: Materials Science and Engineering 523 (1), 012080, 2019 | 2019 |
|
|
| 54 | Analysis of transport workers’ postures in the loading process of manual material handling activities by using the photogrammetric method | IOP Conference Series: Materials Science and Engineering 523 (1), 012081, 2019 | 2019 |
|
|
| 55 | Numerical analysis of the stress leading to fatigue failure on a coil spring of the front suspension of a car | IOP Conference Series: Materials Science and Engineering 523 (1), 012066, 2019 | 2019 |
|
|
| 56 | Mechanical behavior of hybrid glass Fiber-Jute reinforced with polymer composite for the wall of the Acehnese boat ‘Jalo Kayoh’ | IOP Conference Series: Materials Science and Engineering 523 (1), 012076, 2019 | 2019 |
|
|
| 57 | Analysis of cracks in the welded zone of stainless steel pipe used in high-pressure decomposer equipment | IOP Conf. Series: Materials Science and Engineering 602 (1), 012063, 2019 | 2019 |
|
|
| 58 | Analisis Efektifitas Kerja Pengangkatan Beban Pada Bagian Pengantongan Di PT. Pupuk Krueng Geukuh | Industrial Engineering Journal 8 (2), 1-11, 2019 | 2019 |
|
|
| 59 | Structural Simulations of Bicycle Frame Behaviour under Various Load Conditions | Materials Science Forum 961, pp. 137-147, 2019 | 2019 |
|
|
| 60 | The Analysis of Hand Motion Angle and Distance of 200 Meters Rowing Athletes Administrators the Province of Aceh | IOSR Journal Of Humanities And Social Science (IOSR-JHSS) 24 (9), 20-25, 2019 | 2019 |
|
|
| 61 | Pengembangan Sistem Pengukuran Gaya Tumbukan pada Jurus Pukulan Datar Pencak Silat Menggunakan Sistem Strain Gauge | Jurnal Teknik Mesin Unsyiah 7 (2), 43-47, 2019 | 2019 |
|
|
| 62 | Stress and strain analysis from dynamic loads of mechanical hand using finite element method | IOP Conference Series: Materials Science and Engineering 352 (1), 012017, 2018 | 2018 |
|
|
| 63 | Stress analysis on mechanical hand prototype with kinematics model approach and performance tests | AIP Conference Proceedings 1983 (Issue 1), 030001: 1-6, 2018 | 2018 |
|
|
| 64 | A comparison of the structural strength between fiberglass and jute fiber in the Acehnese Traditional Boat Jalo Kayoh using finite element method | IOP Conference Series: Materials Science and Engineering 352 (1), 012020, 2018 | 2018 |
|
|
| 65 | The analysis of nursing’s work systems in relation to burnout syndrome (A case study: nurses in RSUDZA, BLUD RSIA, and RSUD Meuraxa, Banda Aceh, Indonesia) | IOP Conference Series: Materials Science and Engineering 453 (1), 012051, 2018 | 2018 |
|
|
| 66 | Desain dan Analisis Artificial Exoskeleton pada Prajurit TNI | Jurnal Optimasi Sistem Industri 17 (2), 135-142, 2018 | 2018 |
|
|
| 67 | Analisis Dinamis Tegangan, Regangan, dan Displacement Badan Perahu Jaloe Kayoh Berbahan Material Komposit dengan Pembebanan Merata Menggunakan Metode Elemen Hingga | Jurnal Teknik Mesin Unsyiah 6 (2), 32-36, 2018 | 2018 |
|
|
| 68 | Mechanics of Soccer Heading and Protective Headgear | Springer, 2018 | 2018 |
|
|
| 69 | Concussion in soccer | Mechanics of Soccer Heading and Protective Headgear, 1-9, 2018 | 2018 |
|
|
| 70 | Simulation of soccer heading manoeuvre | Mechanics of Soccer Heading and Protective Headgear, 29-37, 2018 | 2018 |
|
|
| 71 | Analysis of protective headgear | Mechanics of Soccer Heading and Protective Headgear, 39-43, 2018 | 2018 |
|
|
| 72 | Analysis on Cracks Extension in Welding Zone in Stainless Steel Pipe Used at High Pressure Decomposer Equipment | Conference on Innovation in Technology and Engineering Science 2018, 2018 | 2018 |
|
|
| 73 | Experimental study on performance of the diesel engine fuelled by cerbera odollam oil biodiesel blends | International Journal of Smart Grid and Clean Energy 7 (4), 297-302, 2018 | 2018 |
|
|
| 74 | ANALISIS ASPEK KESELAMATAN DAN KESEHATAN KERJA TERHADAP PENGENDALIAN H2S DI KILANG SULFUR RECOVERY UNIT | ETD Unsyiah, 2018 | 2018 |
|
|
| 75 | MODELING AND ANALYSIS OF IMPACT OF SEPAK TAKRAW BALL ON THE PLAYER’S HEAD | University of Malaya, 2018 | 2018 |
|
|
| 76 | Human Head Finite Element Model | Mechanics of Soccer Heading and Protective Headgear, 19-27, 2018 | 2018 |
|
|
| 77 | Soccer Ball Finite Element Model | Mechanics of Soccer Heading and Protective Headgear, 11-17, 2018 | 2018 |
|
|
| 78 | Modeling and analysis of impact of sepak takraw ball on the player's head | University of Malaya, 2018 | 2018 |
|
|
| 79 | ANALISA PENGARUH MESIN POTONG RUMPUT PADA BADAN MANUSIA DITINJAU DARI ASPEK ERGONOMI DESAIN | Seminar Nasional Tahunan Teknik Mesin XVI-2017, 2017 | 2017 |
|
|
| 80 | Analisis Aspek Keselamatan dan Kesehatan Kerja Terhadap Pengendalian H2S di Kilang Sulfur Recovery Unit (Studi Kasus di PT. Perta Arun Gas Lhokseumawe) | Seminar Nasional Teknik Industri [SNTI 2017] Universitas Malikussaleh 2 (1Â …, 2017 | 2017 |
|
|
| 81 | Analytical modelling of soccer heading | Sadhana 40 (5), 1567-1578, 2015 | 2015 |
|
|
| 82 | Investigation of the head impact power of a sepak takraw ball on sepak takraw players | Kementerian Pendidikan Tinggi (KPT), Malaysia, 2015 | 2015 |
|
|
| 83 | Perancangan dan Analisa Turbin Darrieus Tipe H untuk Pembangkit Listrik Tenaga Arus Air | Jurnal Teknik Mesin 2 (1), 15-20, 2014 | 2014 |
|
|
| 84 | Mathematical Models to Determine the Metabolic Energy Consumption of Stoop and Squat Lifting | Proceedings of International Conference on Natural and Environmental Science …, 2014 | 2014 |
|
|
| 85 | Impact-absorbing materials in reducing brain vibration caused by ball-to-head impact in soccer | Procedia Engineering 72, 515-520, 2014 | 2014 |
|
|
| 86 | ESTIMATION OF HEAD IMPACT POWER ON SEPAK TAKRAW PLAYERS USING FINITE ELEMENT METHOD | MoHE Conference 2014, 41, 2014 | 2014 |
|
|
| 87 | CFD Study of Drag and Lift of Sepak Takraw Ball at Different Face Orientations | Advances in Mechanical Engineering 7 (1), 1-9, 2014 | 2014 |
|
|
| 88 | Classroom Furniture and Student Body Dimensions in East Malaysian Primary Schools | Indonesian Psychological Journal 21 (2), 161-168, 2013 | 2013 |
|
|
| 89 | A review on the pattern of electricity generation and emission in Indonesia from 1987 to 2009 | Renewable and Sustainable Energy Reviews 16 (5), 3206-3219, 2012 | 2012 |
|
|
| 90 | Energy and cost savings of optimal thickness for selected insulation materials and air gaps for building walls in tropical climate | Energy Education Science and Technology Part A: Energy Science and Research …, 2012 | 2012 |
|
|
| 91 | Finite element simulation of takraw balls and their impact on a flat surface | Movement, Health & Exercise 1 (1), 1-9, 2012 | 2012 |
|
|
| 92 | Pilot investigation on the mismatches of classroom furniture and student body dimensions in Malaysian secondary schools | Journal of Social Sciences 6 (2), 287-292, 2010 | 2010 |
|
|
| 93 | Estimation of Head Impact Power on SepakTakraw Players using Photogrametrics Method | The 11th Asia Pacific Industrial Engineering & Management Systems Conference …, 2010 | 2010 |
|
|
| 94 | A solar vehicle based on sustainable design concept | Proceedings of theâ¦, 2009 | 2009 |
|
|
| 95 | THE EFFECT OF SPHERICAL HUB-NOSE POSITION ON PRESSURE DROP IN AN OSCILLATING WATER COLUMN SYSTEM FOR WAVE ENERGY CONVERSION Z. Taha1, Sugiyono1, 2 | Proceedings of the IASTED International Conference 647, 031, 2009 | 2009 |
|
|
| 96 | The effect of spherical hub-nose position on pressure drop in an oscillating water column system for wave energy conversion | 2009 |
|
|
|
| 97 | A study of an Impact of Sepaktakraw Balls on the Head | International Journal of Sports Science and Engineering 2 (2), 107-110, 2008 | 2008 |
|
|
| 98 | Classroom Furniture and Student Body Dimensions in East Malaysian Primary Schools | Anima, Indonesian Psychological Journal 21 (2), 161-168, 2006 | 2006 |
|
|
| 99 | Perancangan Tangan Berjari Banyak sebagai Alat Bantu Tangan Manusia |
|
|
||
| 100 | Numerical Analysis of Traditional Aceh Fishing Boat with Various Scenario Loading and Hull Thickness, Manufacturing by Metal Plasma Cutting and Welding | Proceedings of the 2nd International Conference on Experimental and â¦, 0 |
|
|
|
| 101 | EKSPLORASI KONTRAKSI TERMAL ALUMINIUM ALMG1SICU DAN COOLING CURVE | 2026 |
|
|
|
| 102 | Fabrication and mechanical characterization of binderless boards from sugarcane bagasse fibers | Jurnal Polimesin 23 (2), 147-151, 2025 | 2025 |
|
|
| 103 | PROBABILITAS CEDERA KEPALA: Pendekatan Rekayasa untuk Desain Teknologi Perlindungan Kepala | Penerbit Samudra Biru 1, 1-60, 2025 | 2025 |
|
|
| 104 | University Students Stress Detection During Final Report Subject by Using NASA TLX Method and Logistic Regression | Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi) 9 (3), 465-476, 2025 | 2025 |
|
|
| 105 | The Effect of Number of Laminate Layers on the Ramie E-Glass Fiber Hybrid Composite for Jaloe kayoh Material | Materials Science Forum 1149, 47-54, 2025 | 2025 |
|
|
| 106 | Incorporating Time and Motion Analysis into Modular Arrangement of Predetermined Time Standard | Engineering Headway 21, 43-56, 2025 | 2025 |
|
|
| 107 | Redesigning Motorcycle Helmet Using Ergonomic Function Deployment (EFD) Method among University Students in Aceh Barat Regency | Engineering Headway 21, 23-31, 2025 | 2025 |
|
|
| 108 | Analisis Manajemen Risiko Logistik pada Perusahaan Third Party Logistic (3pl) dengan Metode Risk Breakdown Structure dan Failure Mode And Effect Analysis (Fmea)(Studi Kasus … | Jurnal Teknik Indonesia 4 (2), 63-78, 2025 | 2025 |
|
|
| 109 | Effect of Scirpus grossus fiber density on acoustic absorption characteristics for insulation use | Jurnal Polimesin 23 (3), 339-343, 2025 | 2025 |
|
|
| 110 | Impact analysis of composite laminate structures in traditional Jaloe Kayoh boat hulls | Polish Maritime Research, 2025 | 2025 |
|
|
| 111 | Exploring the physical, mechanical, and thermal properties of oil palm trunk and ramie fiber hybrid bio composites as building insulation materials | Research on Engineering Structures and Materials 11 (4), 1733-1748, 2025 | 2025 |
|
|
| 112 | Investigating the Effects of Solution Treatment Parameters and Artificial Aging on Hardness Improvement of Precipitation-Hardened 6061 Aluminum Alloy | Jurnal Polimesin 23 (4), 463-467, 2025 | 2025 |
|
|
| 113 | Navigation Framework from a Monocular Camera for Autonomous Mobile Robots | Periodica Polytechnica Transportation Engineering 53 (4), 389-405, 2025 | 2025 |
|
|
| 114 | Analysis of the Accuracy and Shooting Angles for Aceh Pétanque Athletes in 2025 | Path of Science 11 (7), 9001-9005, 2025 | 2025 |
|
|
| 115 | Penerapan Teknologi Komposit Hibrid Ramah Lingkungan dalam Pengembangan Jaloe Bruk sebagai Alat Tangkap Ikan Tradisional Aceh | Jurnal Pengabdian Aceh 5 (3), 162-168, 2025 | 2025 |
|
|
| 116 | Analysis of working posture of coffee bean milling operators to reduce musculoskeletal disorder risks using the OWAS and REBA method | Jurnal Polimesin 23 (5), 622-628, 2025 | 2025 |
|
|
| 117 | PENGARUH VARIASI TEMPERATUR CETAKAN TERHADAP COOLING CURVE DAN KONTRAKSI TERMAL ALUMINIUM 7075 | 2025 |
|
|
|
| 118 | The Simulation of Drop-Weight Impact Test on Ramie-Eglass Hybrid Fiber Composite for Kayoh Jaloe Wall Material | Jurnal Polimesin 22 (1), 2024 | 2024 |
|
|
| 119 | The determination analysis of anthropometry dimensions for ergonomics electrical energy-based vehicle design | AIP Conference Proceedings 2838 (1), 050010, 2024 | 2024 |
|
|
| 120 | Application of Scirpus grossus fiber as a sound absorber | Heliyon 10 (1), e28961, 2024 | 2024 |
|
|
| 121 | Visual place recognition for autonomous mobile robot navigation using LoFTR and MAGSAC++ | Jurnal Polimesin 22 (2), 272-277, 2024 | 2024 |
|
|
| 122 | A new CNN-BASED object detection system for autonomous mobile robots based on real-world vehicle datasets | Heliyon 10 (15), 2024 | 2024 |
|
|
| 123 | Pelatihan Teknik Pengelasan dan Pengecatan Atomozing Bagi Santri Pesantren Anak Yatim Darul Hikmah Cot Yang-Kuta Baro Aceh Besar | Kawanad: Jurnal Pengabdian kepada Masyarakat 3 (1), 49-55, 2024 | 2024 |
|
|
| 124 | Effect of perforated aluminum on Calotropis gigantea fiber material’s ability to absorption sound | POLIMESIN 22 (4), 453-456, 2024 | 2024 |
|
|
| 125 | Penerapan Precast Well Ring Bertingkat sebagai Alternatif Solusi untuk Meningkatkan Keamanan dan Kualitas Sumber Air Masyarakat | Jurnal Pengabdian Aceh 4 (4), 199-206, 2024 | 2024 |
|
|
| 126 | Noise Exposure Analysis on Workers Physiological Workload: An Empirical Study at Carpentry Industry | The Journal of Science and Technology (ISAT) 6 (Vol 6, No 2 (2024): J-ISaT â¦, 2024 | 2024 |
|
|
| 127 | Analysis of worker posture of Make-Up Artist by Standard Nordic Questionnaire method and Rapid Entire Assessment | Jurnal Polimesin 22 (6), 681-685, 2024 | 2024 |
|
|
| 128 | Experimental Study on Burnout Syndrome among Hospital Nurses in Banda Aceh | Journal of Industrial Science and Technology 6 (2), 6-12, 2024 | 2024 |
|
|
| 129 | Analysis of Leg Muscle Power and Leg Angle in Jerk Split Movement of SMAKOR Aceh Weightlifters | Path of Science 10 (11), 7013-7017, 2024 | 2024 |
|
|
| 130 | Manufaktur Material Komposit Sandwich Melalui Pengembangan Produk Perahu Pancing Tradisional Aceh | Jurnal Pengabdian Aceh 3 (2), 160-167, 2023 | 2023 |
|
|
| 131 | PENGARUH SISTEM KERJA TIDAK ERGONOMIS TERHADAP POSTUR TUBUH NELAYAN | Prosiding Seminar Nasional Teknik UISU (SEMNASTEK) 6 (1), 88-92, 2023 | 2023 |
|
|
| 132 | Implementasi Sistem Portable Fish Tank: Pengembangan Peternakan Budidaya Ikan Hias | Jurnal Pengabdian Aceh 3 (3), 223-230, 2023 | 2023 |
|
|
| 133 | The development of a wearable device for Sign Language Gesture Recognition (SLGR) by using Conceptual Design Approach (CDA) | Jurnal Polimesin 21 (4), 451-457, 2023 | 2023 |
|
|
| 134 | Optimization process of the truss structure using Finite Element Analysis: Step by step from 2D to 3D space | Jurnal Polimesin 21 (4), 421-425, 2023 | 2023 |
|
|
| 135 | Perancangan Mesin Pemberi Pakan Otomatis Berbasis Iot (Internet of Things) Untuk Budidaya Ikan Sebagai Solusi Keamanan Pangan Dan Pemanfaatan Energi Berkelanjutan | Marine Kreatif 7 (2), 70-77, 2023 | 2023 |
|
|
| 136 | Analysis of Attack Speed in Fencing Athletes | Path of Science 9 (9), 6001-6005, 2023 | 2023 |
|
|
| 137 | Analisis Keluhan Nyeri Otot Pada Tubuh Nelayan Setelah Melakukan Pekerjaan | Talenta Conference Series: Energy and Engineering (EE) 6 (1), 1140-1146, 2023 | 2023 |
|
|
| 138 | PKM PERBAIKAN KEHIDUPAN PEMULUNG UNTUK MENINGKATKAN PENDAPATAN MELALUI PEMANFAATAN SUMBER DAYA ALAM | Martabe: Jurnal Pengabdian Kepada Masyarakat 6 (12), 4502-4510, 2023 | 2023 |
|
|
| 139 | Melinjo fruit outer skin peeler prototype design using grate roller based-on auto reverse movement control | Jurnal Polimesin 21 (6), 96-100, 2023 | 2023 |
|
|
| 140 | Musculoskeletal Disorders Risk Levels in Tofu Workers in North Aceh: An Ergonomic Assessment | Journal of Applied Engineering and Technological Science (JAETS) 5 (1), 635-648, 2023 | 2023 |
|
|
| 141 | IMPLEMENTASI DESAIN BARU BECAK LISTRIK PENGANGKUT SAMPAH UNTUK TRANSPORTASI RAMAH LINGKUNGAN DENGAN ENERGI TERBARUKAN | Jurnal Vokasi 7 (3), 323-329, 2023 | 2023 |
|
|
| 142 | Object Classification System Using Convolutional Neural Network for Several Environmental Conditions | International Conference on Experimental and Computational Mechanics in â¦, 2022 | 2022 |
|
|
| 143 | The Failure Analysis of Crankshaft of Four Cylinder Diesel Engine Using Numerical Method | International Conference on Experimental and Computational Mechanics in …, 2022 | 2022 |
|
|
| 144 | Effect of Perforated Aluminum on the Sound Absorption Ability of Calotropis gigantea Fiber Material | International Conference on Experimental and Computational Mechanics in …, 2022 | 2022 |
|
|
| 145 | Analysis of the Application of the Warehouse Receipt System (WRS) for Patchouli Oil | Proceedings of the 3rd International Conference on Experimental and …, 2022 | 2022 |
|
|
| 146 | Stress and Strain Analysis of the Traditional Boat Jaloe Kayoh | Proceedings of the 2nd International Conference on Experimental and …, 2021 | 2021 |
|
|
| 147 | Loading and Hull Thickness, Manufacturing by Metal Plasma Cutting | Proceedings of the 2nd International Conference on Experimental and â¦, 2021 | 2021 |
|
|
| 148 | Impact-absorbing materials in reducing brain vibration caused by ball-to-head impact in soccer: Procedia Engineering | 2014 |
|
|
|
| 149 | The Atmospheric Corrosion of Structural Steel after Exposure in the Palm Oil Mill Industry Area of Aceh-Indonesia | Indonesian Journal of Chemistry 21 (4), 901-911 |
|
|
|
| 150 | Journal Content Browse |
|
|
||
| 151 | Numerical Analysis of Traditional Aceh Fishing Boat with Various Scenario Loading and Hull Thickness, Manufacturing by Metal Plasma Cutting and Welding | Proceedings of the 2nd International Conference on Experimental and …, 0 |
|
|
|
| 152 | CFD Study of Drag and Lift of Sepak Takraw Ball at Different Face Orientations | Advances in Mechanical Engineering |
|
|
|
| 153 | Comparison of Motion Data from Video Cameras and Accelerometers of Human Running |
|
|
||
| 154 | CFD Study of Drag and Lift of Sepak Takraw Ball at Different Face Orientations | Advances in Mechanical Engineering, 0 |
|
|
|
| 155 | Perancangan Tangan Berjari Banyak sebagai Alat Bantu Tangan Manusia |
|
|
||
| 156 | Comparison of Motion Data from Video Cameras and Accelerometers of Human Running |
|
|
||
| 157 | Pengabdian Kepada Masyarakat Dengan Pendekatan Bakti Sosial dan Pelatihan Secara Berkelanjutan di Wilayah Provinsi Aceh |
|
|
||
| 158 | Research Article CFD Study of Drag and Lift of Sepak Takraw Ball at Different Face Orientations |
|
|
||
| 159 | Analisis postur tubuh dan tingkat keluhan pada proses penyeduhan kopi Aceh untuk perencanaan desain alat kerja |
|
|
||
| 160 | Jurnal Polimesin |
|
|
||
| 161 | Good Manufacturing Practice (GMP) in Tofu MSMEs in North Aceh | SINERGI 27 (8), 443-450, 0 |
|
|
|
| 162 | Design of Ergonomic Work Aids to Reduce Fishermen's Physical Complaints | Available at SSRN 5353115, 0 |
|
|
|
| 163 | Modeling of sea surface temperature using linear models with autocorrelation Indian Ocean | IOP Conference Series: Earth and Environmental Science 176 (1), 012038, 2018 | 2018 |
|
|
List of Research Works
| No | Title | Focus | Scheme | Year | |
|---|---|---|---|---|---|
| 1 | Desain dan Manufaktur Sistem Adaptif Pasang Surut pada Pembangkit Listrik Tenaga Ombak Jenis Point Absorber dengan Generator Permanen Magnet Linear | Energi | Penelitian Terapan Kompetitif Nasional | 2024 |
|
| 2 | Desain dan Manufaktur Sistem Adaptif Pasang Surut pada Pembangkit Listrik Tenaga Ombak Jenis Point Absorber dengan Generator Permanen Magnet Linear | Energi | Penelitian Terapan Kompetitif Nasional | 2023 |
|
| 3 | Pengembangan Purwarupa Autonomous Mobile Robot Pengangkut Barang Berbasis Deep Learning | Transportasi | Penelitian Disertasi Doktor | 2023 |
|
| 4 | PEMANFAATAN LIMBAH PERTANIAN UNTUK KEMASAN RAMAH LINGKUNGAN BERBASIS MIKRO-NANO SELULOSA | MESIN | PENELITIAN UNGGULAN UNIVERSITAS SYIAH KUALA | 2022 |
|
| 5 | PENGUKURAN FORMAN VOKAL: MONOFTONG DAN DIFTONG BAHASA INDONESIA OLEH PENUTUR ACEH | KESATARAAN GENDER | PENELITIAN PROFESOR | 2022 |
|
| 6 | Pengembangan Purwarupa Autonomous Mobile Robot Pengangkut Barang Berbasis Deep Learning | Transportasi | Penelitian Disertasi Doktor | 2022 |
|
| 7 | Desain dan Manufaktur Sistem Adaptif Pasang Surut pada Pembangkit Listrik Tenaga Ombak Jenis Point Absorber dengan Generator Permanen Magnet Linear | Energi | Penelitian Terapan Kompetitif Nasional | 2022 |
|
| 8 | OPTIMASI DESAIN JALOE ACEH MENGGUNAKAN MATERIAL HIBRID E-GLASS DAN SERAT RAMI DENGAN METODE FINITE ELEMENT ANALYSIS (FEA) | INTEGRASI FOKUS RISET ENERGI - ENERGI BARU DAN TERBARUKAN | PENELITIAN LEKTOR | 2021 |
|
| 9 | Desain dan manufaktur motor listrik flux axial sistem modular untuk kendaraan listrik perkotaan | Energi | Penelitian Terapan | 2021 |
|
| 10 | PEMANFAATAN LIMBAH PERTANIAN UNTUK KEMASAN RAMAH LINGKUNGAN BERBASIS MIKRO-NANO SELULOSA | INTEGRASI FOKUS RISET ENERGI - ENERGI BARU DAN TERBARUKAN | PENELITIAN UNGGULAN UNSYIAH-PENUGASAN | 2021 |
|
| 11 | Desain dan manufaktur motor listrik flux axial sistem modular untuk kendaraan listrik perkotaan | Energi | Penelitian Terapan | 2020 |
|
| 12 | KONTRIBUSI SERAT ALAMI SEBAGAI MATERIAL PERKUATAN GESER BALOK BETON BERTULANG | ENERGI BARU DAN TERBARUKAN | PENELITIAN LEKTOR KEPALA | 2020 |
|
| 13 | Desain dan Manufaktur Sistem Pembangkit Listrik Tenaga Ombak Dengan Permanent Magnet Linear Generator Untuk Banda Aceh dan Kabupaten Aceh Besar | Energi | Penelitian Terapan Unggulan Perguruan Tinggi | 2020 |
|
| 14 | ANALISIS STATIK DAN DINAMIK MELALUI CONCENTRATION FORCE MENGGUNAKAN FINITE ELEMENT METHOD (FEM) BODY JALOE KAYOH BERBAHAN KOMPOSIT | ENERGI BARU DAN TERBARUKAN , MATERIAL MAJU | PENELITIAN LEKTOR | 2020 |
|
| 15 | Perilaku Kuat Lekatan Serat Alam Terhadap Beton Bertulang Sebagai Bahan Alternatif Fiber Reinforced Polymer Untuk Perkuatan Struktur | Material Maju | Penelitian Tesis Magister | 2019 |
|
| 16 | Desain dan Manufaktur Sistem Pembangkit Listrik Tenaga Ombak Dengan Permanent Magnet Linear Generator Untuk Banda Aceh dan Kabupaten Aceh Besar | Energi | Penelitian Terapan Unggulan Perguruan Tinggi | 2019 |
|
| 17 | Desain dan manufaktur motor listrik flux axial sistem modular untuk kendaraan listrik perkotaan | Energi | Penelitian Terapan | 2019 |
|
| 18 | Desain dan Manufaktur Sistem Pembangkit Listrik Tenaga Ombak Dengan Permanent Magnet Linear Generator Untuk Banda Aceh dan Kabupaten Aceh Besar | Energi | Penelitian Terapan Unggulan Perguruan Tinggi | 2018 |
|
| 19 | Desain Manufaktur dan Analisis Kekuatan Struktur Pada Perahu Tradisional Aceh Jalo Kayoh Berbahan Serat Alam | Material Maju | Penelitian Strategis Nasional Institusi | 2018 |
|
| 20 | Desain Manufaktur dan Analisis Kekuatan Struktur Pada Perahu Tradisional Aceh Jalo Kayoh Berbahan Serat Alam | Material Maju | Penelitian Strategis Nasional Institusi | 2017 |
|
| 21 | EVALUASI KONTRAKSI TERMAL DAN KURVA SOLIDIFIKASI AKIBAT VARIASI TEMPERATUR TUANG PADA PADUAN LOGAM ALMG1SICU | TRANSPORTASI,MATERIAL MAJU | PENELITIAN PROFESOR | 2025 |
|
| 22 | INOVASI MATERIAL KOMPOSIT HIBRIDA E-GLASSâABACA UNTUK HELM MEDIS: HEAD IMPACT POWER MELALUI SIMULASI FINITE ELEMENT ANALYSIS | KESEHATAN DAN OBAT-OBATAN | PENELITIAN PROFESOR | 2025 |
|
| 23 | DESIGN DAN ANALISIS HELM ERGONOMIS UNTUK PENGEMUDI SEPEDA MOTOR WANITA BERSANGGUL BERDASARKAN DATA ANTROPOMETRI ACEH, PERSEPSI PENGGUNA DAN FINITE ELEMENT METHOD (FEM) | TRANSPORTASI | PENELITIAN PROFESOR | 2024 |
|
| 24 | Motor Permanen Magnet Flux Axial Sistem Modular untuk Kendaraan Listrik | Transportasi | Prototipe | 2024 |
|
| 25 | Pengembangan Kaki Prostetik Dari Komposit Serat Alam (Abaca) Dengan Analisis Kekuatan Menggunakan Metode Elemen Hingga Dan Teknik Pembuatan Cetak Tekan | Material Maju | Penelitian Fundamental - Reguler | 2024 |
|
| 26 | PENGEMBANGAN KOMPONEN SEPEDA DARI KOMPOSIT ALAMI YANG DIPERKUAT SERAT PISANG ABACA MELALUI ANALISA KEKUATAN MENGGUNAKAN METODE ELEMAN HINGGA DAN TEKNIK PEMBUATAN DENGAN METODE CETAK TEKAN | MATERIAL MAJU | PENELITIAN LEKTOR KEPALA | 2024 |
|
| 27 | Pengembangan Perahu Jaloe Kayoh yang Optimal dengan Material E-Glass dan Ramie melalui Analisis Beban Dinamik dan Simulasi FEA | Transportasi | Penelitian Disertasi Doktor | 2024 |
|
| 28 | INTEGRASI SISTEM OBSERVASI GEMPA REAL TIME BERBASIS SENSOR MURAH DAN PARTISIPASI MASYARAKAT UNTUK PEMBANGUNAN DAERAH YANG LEBIH AMAN | KEBENCANAAN | PENELITIAN UNGGULAN USK - LANJUTAN | 2024 |
|
| 29 | MODELING DAN ANALISIS HEAD IMPACT POWER (HIP) DAN HEAD INJURY CRITERIA (HIC) PADA HELM PENGENDARA SEPEDA MOTOR MENGGUNAKAN METODA EXPERIMENTAL DAN FINITE ELEMENT ANALYSIS | KESEHATAN DAN OBAT-OBATAN,TRANSPORTASI | PENELITIAN LEKTOR KEPALA | 2023 |
|
| 30 | Pengembangan Perahu Jaloe Kayoh yang Optimal dengan Material E-Glass dan Ramie melalui Analisis Beban Dinamik dan Simulasi FEA | Transportasi | Penelitian Disertasi Doktor | 2023 |
|
| 31 | Pengembangan Desain Alat Bantu Kerja pada UMKM Tahu dengan Pendekatan Ergonomi Partisipatori | Pangan | Penelitian Disertasi Doktor | 2022 |
|
List of Community Services
| No | Title | Focus | Scheme | Year | |
|---|---|---|---|---|---|
| 1 | PENGEMBANGAN SMART PLANE UNTUK MAPPING LAHAN PERTANIAN DAN PERIKANAN DALAM RANGKA MEMPERKUAT KETAHANAN PANGAN DI MASA PANDEMI | ENERGI BARU DAN TERBARUKAN | PENGABDIAN KEPADA MASYARAKAT BERBASIS PRODUK | 2021 |
|
| 2 | PEMBUDIDAYAAN AYAM BROILER ORGANIK UNTUK MENINGKATKAN KUALITAS KESEHATAN DAN PEREKONOMIAN MASYARAKAT DI GAMPONG LAMBIHEU KECAMATAN DARUSSALAM KABUPATEN ACEH BESAR | ENERGI BARU DAN TERBARUKAN, TEKNOLOGI INFORMASI DAN KOMUNIKASI, KEMARITIMAN | PENGABDIAN KEPADA MASYARAKAT BERBASIS PRODUK | 2020 |
|
| 3 | PENGEMBANGAN DESAIN DAN INOVASI KABIN BECAK LISTRIK BERBAHAN KOMPOSIT SEBAGAI ALTERNATIF PENINGKATAN TRANSPORTASI KENDARAAN RODA TIGA DALAM MENDUKUNG PENGGUNAAN ENERGI TERBAHARUKAN | ENERGI BARU DAN TERBARUKAN, MATERIAL MAJU, TEKNOLOGI INFORMASI DAN KOMUNIKASI, TRANSPORTASI | PENGABDIAN KEPADA MASYARAKAT BERBASIS PRODUK | 2019 |
|
| 4 | IbIKK - Budidaya dan Usaha Pengolahan Tanaman Pisang Abaca sebagai Penghasil Serat pada Lahan Garapan Universitas Syiah Kuala | Pangan | Program Pengembangan Usaha Produk Intelektual Kampus | 2018 |
|
| 5 | IbIKK - Budidaya dan Usaha Pengolahan Tanaman Pisang Abaca sebagai Penghasil Serat pada Lahan Garapan Universitas Syiah Kuala | Pangan | Program Pengembangan Usaha Produk Intelektual Kampus | 2017 |
|
| 6 | USAHA PERAHU TRADISIONAL ACEH JALO KAYOH MELALUI APLIKASI PENGGUNAAN MATERIAL KOMPOSIT FIBERGLASS UNTUK MASYARAKAT PESISIR GAMPONG RUKOH KECAMATAN SYIAH KUALA | Kemaritiman | KKN Pembelajaran Pemberdayaan Masyarakat | 2017 |
|
| 7 | IbIKK - Budidaya dan Usaha Pengolahan Tanaman Pisang Abaca sebagai Penghasil Serat pada Lahan Garapan Universitas Syiah Kuala | Pangan | Program Pengembangan Usaha Produk Intelektual Kampus | 2016 |
|
| 8 | IbM untuk Peningkatan Teknologi Pembuatan Body Perahu Penangkap Ikan Menggunakan Bahan Resin Thermosetting di Desa Kampung Pandee | Pangan | Program Kemitraan Masyarakat | 2015 |
|
| 9 | PENGEMBANGAN TEKNOLOGI KOMPOSIT HIBRID RAMAH LINGKUNGAN UNTUK REVITALISASI JALOE BRUK BAGI KELOMPOK NELAYAN KRUENG TEUGA | KEMARITIMAN | PENGABDIAN KEPADA MASYARAKAT BERBASIS TEKNOLOGI TEPAT GUNA | 2025 |
|
| 10 | PKM PERBAIKAN KEHIDUPAN PEMULUNG MENJADI ENTERPREUNEUR UNTUK MENINGKATKAN PENDAPATAN MELALUI PEMANFAATAN SUMBER DAYA ALAM DI DESA KUALA PUSONG | RIM-PANGAN | PEMBERDAYAAN BERBASIS MASYARAKAT | 2023 |
|
| 11 | MANUFAKTUR NEW DESIGN BECAK LISTRIK PENGANGKUT SAMPAH DALAM MENDUKUNG TRANSPORTASI HEMAT ENERGI MELALUI PENGGUNAAN ENERGI TERBAHARUKAN | ENERGI BARU DAN TERBARUKAN,TRANSPORTASI | PENGABDIAN KEPADA MASYARAKAT BERBASIS PRODUK | 2023 |
|
| 12 | PKM Perbaikan Kehidupan Pemulung Menjadi Enterpreuneur Untuk Meningkatkan Pendapatan Melalui Pemanfaatan Sumber Daya Alam di Desa Kuala Pusong Kapal Kecamatan Seruway Kabupaten Aceh Tamiang | Pangan | Pemberdayaan Kemitraan Masyarakat | 2023 |
|
List of IPRs
| No | Title | Publication Date | Category | Request Number |
|---|
List of Books
| No | Title | Publisher | Place | Category | ISBN | Year | |
|---|---|---|---|---|---|---|---|
| 1 | EKSPLORASI KONTRAKSI TERMAL ALUMINIUM ALMG1SICU DAN COOLING CURVE | Penerbit Samudra Biru | Indonesia | buku ajar | 9786342541258 | 2026 |
|
| 2 | PENGARUH VARIASI TEMPERATUR CETAKAN TERHADAP COOLING CURVE DAN KONTRAKSI TERMAL ALUMINIUM 7075 | Penerbit Samudra Biru | Indonesia | buku ajar | 9786342541050 | 2025 |
|
| 3 | PROBABILITAS CEDERA KEPALA: Pendekatan Rekayasa untuk Desain Teknologi Perlindungan Kepala | Penerbit Samudra Biru | Indonesia | buku ajar | 9786232619371 | 2025 |
|