Dr. M. Eng AKHYAR, S.T, M.P
S3 - Ilmu Teknik
SINTA Score Overall
3.555
SINTA Score 3Year
911
Affiliation Score Overall
2.441.779.968
Affiliation Score 3Year
933.772.992
Authors Publication
Database Author
| Scopus | WOS | Garuda | GS | |
|---|---|---|---|---|
| Article | 102 | 43 | 2 | 122 |
| Citation | 649 | 147 | 0 | 807 |
| Cited Document | 82 | 28 | 0 | 91 |
| H-Index | 14 | 6 | 0 | 16 |
| i10-Index | 21 | 0 | 0 | 27 |
| G-Index | 2 | 0 | 0 | 1 |
List of Articles
| No | Title | Publication | Date | Type | URL | |
|---|---|---|---|---|---|---|
| 1 | Numerical Analysis of Small-Scale Horizontal Type Wind Turbine Using the Computational Fluids Dynamics (CFD) Method | Lecture Notes in Mechanical Engineering | 1 January 2023 | Book Series |
|
|
| 2 | Physic-Chemical Parameter of Water Around Kutaraja Fishing Port: A Preliminary Study for Shipyard Industry Development | Lecture Notes in Mechanical Engineering | 1 January 2023 | Book Series |
|
|
| 3 | Agricultural Droughts Monitoring of Aceh Besar Regency Rice Production Center, Aceh, Indonesia â Application Vegetation Conditions Index using Sentinel-2 Image Data | Journal of Ecological Engineering | 1 January 2023 | Journal |
|
|
| 4 | Stress and Strain Analysis of UAV Hexacopter Frame Using Finite Element Method | Aip Conference Proceedings | 30 January 2023 | Conference Proceedin |
|
|
| 5 | Effect of variations in pouring temperature on tensile strength of CuZn cast alloys | Materials Letters X | 1 March 2023 | Journal |
|
|
| 6 | Identification Shipyard Model Suitable for Kutaraja Fishing Port in Aceh, Indonesia | Polish Journal of Environmental Studies | 1 January 2023 | Journal |
|
|
| 7 | Optimizing the Placement and Capacity of Distributed Generation (DG) on the Krueng Raya Feeder in Banda Aceh Distribution System to Increase Power Flow using Genetic Algorithm Method | Proceedings of the International Conference on Electrical Engineering and Informatics | 1 January 2022 | Conference Proceedin |
|
|
| 8 | Fundamental Study on Combustion Characteristics of Bio-briquette as Alternative Fuels for Domestic Coffee Stove | Iop Conference Series Earth and Environmental Science | 1 January 2022 | Conference Proceedin |
|
|
| 9 | Effect of pouring temperature on impact toughness on brass (Cu-zn) through metal casting | Metalurgija | 1 July 2021 | Journal |
|
|
| 10 | Effect of pouring temperature on impact Toughness on brass (cu-zn) through metal casting | Anali Zavoda za Povijesne Znanosti Hrvatske Akademije Znanosti i Umjetnosti u Dubrovniku | 1 July 2021 | Journal |
|
|
| 11 | FAE Analysis of Boat Propeller with Differences of Loading Conditions and Manufacturing by Casting Process | Lecture Notes in Mechanical Engineering | 1 January 2021 | Book Series |
|
|
| 12 | CFD Investigation on Aerodynamic Characteristics and Performance of Windmill Aerator Type Savonius Four Blade | Lecture Notes in Mechanical Engineering | 1 January 2021 | Book Series |
|
|
| 13 | Numerical Analysis of Traditional Aceh Fishing Boat with Various Scenario Loading and Hull Thickness, Manufacturing by Metal Plasma Cutting and Welding | Lecture Notes in Mechanical Engineering | 1 January 2021 | Book Series |
|
|
| 14 | Oceanographic Factors as the Indicators for Shipyard Industry Development in Kutaraja Fishing Port: A Preliminary Study | Journal of Ecological Engineering | 1 January 2021 | Journal |
|
|
| 15 | Study on fracture failures of the super heater water pipe boiler | Defect and Diffusion Forum | 1 January 2020 | Journal |
|
|
| 16 | Effect of different gating systems and sand mold binder on the castquality of bicycle frame produced through sand casting method | Defect and Diffusion Forum | 1 January 2020 | Journal |
|
|
| 17 | The design of rowing ergometer based on the anthropometry of acehnese male athletes | Iop Conference Series Materials Science and Engineering | 1 October 2020 | Conference Proceedin |
|
|
| 18 | Structural simulations of bicycle frame behaviour under various load conditions | Materials Science Forum | 1 January 2019 | Book Series |
|
|
| 19 | MgH2-SiC based hydrogen storage material prepared by reactive mechanical alloying method | Iop Conference Series Earth and Environmental Science | 25 January 2018 | Conference Proceedin |
|
|
| 20 | Stress analysis on mechanical hand prototype with kinematics model approach and performance tests | Aip Conference Proceedings | 13 July 2018 | Conference Proceedin |
|
|
| 21 | Stress and strain analysis from dynamic loads of mechanical hand using finite element method | Iop Conference Series Materials Science and Engineering | 11 May 2018 | Conference Proceedin |
|
|
| 22 | Experimental investigation on open sun-drying and solar drying system of bilimbi | Proceedings 2016 6th International Annual Engineering Seminar Inaes 2016 | 17 January 2017 | Conference Proceedin |
|
|
| 23 | Magnetic behavior of natural magnetite (Fe3O4) extracted from beach sand obtained by mechanical alloying method | Aip Conference Proceedings | 10 July 2017 | Conference Proceedin |
|
|
| 24 | Study on cooling curve behavior during solidification and investigation of impact strength and hardness of recycled Al-Zn aluminum alloy | International Journal of Metalcasting | 1 October 2016 | Journal |
|
|
| 25 | Visual and semi-automated interpretation methods for urban flood detection using SAR Sentinel-1A image: study case in North Aceh Regency, Indonesia | Disaster Advances | 1 February 2023 | Journal |
|
|
| 26 | Evaluation of cast defects in ship propeller of recycled aluminum alloy | Metalurgija | 1 April 2022 | Journal |
|
|
| 27 | Evaluation ofWelding Distortion and Hardness in the A36 Steel Plate Joints Using Different Cooling Media | Sustainability Switzerland | 1 February 2022 | Journal |
|
|
| 28 | IMPACT TOUGHNESS OF ASTM A36 LOW CARBON STEEL BY METAL ACTIVE GAS (MAG) WELDING PROCESS USING DIFFERENT COOLING MEDIA | Metalurgija | 1 January 2022 | Journal |
|
|
| 29 | EXPERIMENTAL INVESTIGATION ON HARDNESS, TENSILE STRENGTH, AND MICROSTRUCTURE OF Al-3,1Cu CAST-ALLOY AFTER T6-TEMPERED | Metalurgija | 1 July 2022 | Journal |
|
|
| 30 | Impact of pouring temperature on the mechanical properties of Al5.9Cu1.9Mg alloy | Archives of Materials Science and Engineering | 1 February 2022 | Journal |
|
|
| 31 | The Effect of Electrode Type on The Tensile Strength Characteristics of Welded Joints Between SA.240 Tp.304 Stainless Steel and SA.36 Carbon Steel Alloys through SMAW Welding Process | International Journal of Integrated Engineering | 1 January 2022 | Journal |
|
|
| 32 | Hot Tearing, Parameters, and Mould Types for Observation - Review | Archives of Foundry Engineering | 1 January 2022 | Journal |
|
|
| 33 | Effect of Welding Parameter Conditions of 304L SS and AISI 1015 Dissimilar Steel Weld Joints to Macrostructure and Mechanical Properties | Materials Science Forum | 1 January 2022 | Book Series |
|
|
| 34 | Preface | Lecture Notes in Mechanical Engineering | 1 January 2021 | Book Series |
|
|
| 35 | Surface Roughness and Hardness Characteristic of 2024 Aluminum Alloy by Electroplating Ni-Cr | Journal of Physics Conference Series | 2 September 2021 | Conference Proceedin |
|
|
| 36 | Numerical simulation of physical-mechanical properties based on the composition of gtaw weld metal alloys with dissimilar base metals | Key Engineering Materials | 1 January 2021 | Book Series |
|
|
| 37 | Nanomagnetite extraction from iron sand prepared by mechanical alloying method | Key Engineering Materials | 1 January 2021 | Book Series |
|
|
| 38 | The effect of tool rotation speed on hardness, tensile strength, and microstructure of dissimilar friction stir welding of dissimilar aa5083 and aa6061-t6 alloys | Key Engineering Materials | 1 January 2021 | Book Series |
|
|
| 39 | Preface | Key Engineering Materials | 1 January 2021 | Book Series |
|
|
| 40 | Transition of learning physics technology using virtual practicum to high school physics teachers in Aceh Barat District | Journal of Physics Conference Series | 25 October 2021 | Conference Proceedin |
|
|
| 41 | Green open space detection and mapping using planetscope-3a image with vegetation index approach and supervised classification in Banda Aceh, Indonesia | Forum Geografic | 1 Desember 2021 | Journal |
|
|
| 42 | Preface | Lecture Notes in Mechanical Engineering | 1 January 2021 | Book Series |
|
|
| 43 | Heat treatment T4 and T6 effects on mechanical properties in Al-Cu alloy after remelt with different pouring temperatures | Metalurgija | 1 January 2020 | Journal |
|
|
| 44 | Influence of shot peening on surface properties and corrosion resistance of implant material AISI 316L | Metalurgija | 1 January 2020 | Journal |
|
|
| 45 | Fatigue behavior improvement of a356 aluminum alloy of motorcycle cast wheel produced by high speed centrifugal casting based on t6 heat treatment and artificial aging | Materials Science Forum | 1 January 2020 | Book Series |
|
|
| 46 | Preface | Defect and Diffusion Forum | 1 January 2020 | Journal |
|
|
| 47 | Numerical simulation of the effect of shoulder rotation on the tensile strength of fsw dissimilar joints of aluminum alloy | Defect and Diffusion Forum | 1 January 2020 | Journal |
|
|
| 48 | Desorption properties of mechanically milled MgH2 with double catalysts Ni and SiC | Iop Conference Series Materials Science and Engineering | 1 October 2020 | Conference Proceedin |
|
|
| 49 | Distribution of hardness, surface roughness and wettability of aisi 316l induced by shot peening with different duration and shooting distance | Iop Conference Series Materials Science and Engineering | 13 October 2020 | Conference Proceedin |
|
|
| 50 | Fatigue crack growth rate of motorcycle wheel fabricated by centrifugal casting | Metalurgija | 1 January 2019 | Journal |
|
|
| 51 | Desorption behaviour of MgH2-Ni-SiC prepared by ball milling for hydrogen storage material application | Iop Conference Series Materials Science and Engineering | 22 February 2019 | Conference Proceedin |
|
|
| 52 | Increase the heating capacity of solar water heaters through two conditions of placing paraffin in copper tubes | Iop Conference Series Materials Science and Engineering | 8 July 2019 | Conference Proceedin |
|
|
| 53 | Experiment on hardness and impact strength of recycled aluminum alloys by metal casting process | Materials Science Forum | 1 January 2019 | Book Series |
|
|
| 54 | The experimental performance of the semi-cylindrical type of solar concentrator collector on the addition of heat storage material | Iop Conference Series Materials Science and Engineering | 6 September 2019 | Conference Proceedin |
|
|
| 55 | The effect of solar water heater performance by variation of the plate shaped | Iop Conference Series Materials Science and Engineering | 6 September 2019 | Conference Proceedin |
|
|
| 56 | Fatigue crack growth rate of motorcycle wheel fabricated by centrifugal casting | Anali Zavoda za Povijesne Znanosti Hrvatske Akademije Znanosti i Umjetnosti u Dubrovniku | 1 January 2019 | Journal |
|
|
| 57 | Effect of shot peening at different almen intensities on fatigue behavior of AISI 304 | Metalurgija | 1 October 2018 | Journal |
|
|
| 58 | Investigation of turbine ventilator performance after added wind cup for room exhaust air applications | Iop Conference Series Materials Science and Engineering | 11 May 2018 | Conference Proceedin |
|
|
| 59 | Non treatment, t4 and t6 on tensile strength of al-5.9cu-1.9mg alloy investigated by variation of casting temperature | Materials Science Forum | 1 January 2018 | Book Series |
|
|
| 60 | Modification of constrained rod casting mold for new hot tearing measurement | Archives of Metallurgy and Materials | 1 January 2018 | Journal |
|
|
| 61 | Hydrogen storage properties of mechanical milled MgH2-nano Ni for solid hydrogen storage material | Iop Conference Series Materials Science and Engineering | 19 November 2018 | Conference Proceedin |
|
|
| 62 | Effect of shot peening on microstructure, hardness, and corrosion resistance of AISI 316l | Journal of Achievements in Materials and Manufacturing Engineering | 1 July 2018 | Journal |
|
|
| 63 | Hot tearing susceptibility of aluminum alloys using CRCM-Horizontal mold | Results in Physics | 1 January 2017 | Journal |
|
|
| 64 | Effect of T6 heat treatment and artificial aging on mechanics and fatigue properties of A356.0 aluminum alloy produced by 350 rpm centrifugal casting | Proceedings 2016 6th International Annual Engineering Seminar Inaes 2016 | 17 January 2017 | Conference Proceedin |
|
|
| 65 | Analysis of tsunami disaster map by Geographic Information System (GIS): Aceh Singkil-Indonesia | Iop Conference Series Earth and Environmental Science | 1 March 2017 | Conference Proceedin |
|
|
| 66 | Natural fiber-based partially and spiral confinement: A sustainable solution for improving reinforced concrete column performance | Advances in Science and Technology Research Journal | 1 January 2026 | Journal |
|
|
| 67 | The influence of water velocity and blade number variation on the performance of water vortex turbines | Multidisciplinary Science Journal | 1 January 2026 | Journal |
|
|
| 68 | A review of vortex water turbine design for sustainable energy generation (principles, optimization, and validation) | Energy Conversion and Management X | 1 April 2025 | Journal |
|
|
| 69 | Effect of Superheat on Hot Tearing Susceptibility in Re-melted 6061 Aluminum Alloy | International Journal of Metalcasting | 1 September 2025 | Journal |
|
|
| 70 | Variations in casting temperatures effect of re-melted 6061 aluminum alloy on tensile strength | Results in Materials | 1 June 2025 | Journal |
|
|
| 71 | Simulations of Temperature and Wind Speed Contours and Vectors for Thermal Comfort Analysis in Worship Spaces: The Case Study of Baiturrahman Grand Mosque, Indonesia | Engineering Technology and Applied Science Research | 1 August 2025 | Journal |
|
|
| 72 | Artificial intelligence for dental caries detection: A mixup, fineâtuning, and quantization approach on the MobileNetV2 model | Journal of Conservative Dentistry and Endodontics | 1 August 2025 | Journal |
|
|
| 73 | Computational Analysis of Pressure Distribution of Traditional Aceh Boat Hull Attributed to Speed Variations | Journal of Maritime Research | 30 April 2025 | Journal |
|
|
| 74 | Enhancing Capacity and Ductility of Reinforced Concrete Column by Partially Wrapped Natural Fiber Reinforced Polymer | E3s Web of Conferences | 19 March 2025 | Conference Proceedin |
|
|
| 75 | The Thermal Comfort Performance in an Indonesian Refugee Tent: Existing Conditions and Redesigns | Energies | 1 March 2025 | Journal |
|
|
| 76 | Numerical analysis of thermal comfort behavior in Acehnese traditional houses in Indonesia | Ecological Engineering and Environmental Technology | 1 January 2025 | Journal |
|
|
| 77 | Development of an artificial intelligence model based on MobileNetV3 for early detection of dental caries using smartphone images: A preliminary study | Advances in Science and Technology Research Journal | 1 January 2025 | Journal |
|
|
| 78 | PERFORMANCE IMPROVEMENT OF SELF-EXCITED INDUCTION GENERATOR USING CAPACITOR BANK BASED ON PID CONTROLLER | Radioelectronic and Computer Systems | 1 January 2025 | Journal |
|
|
| 79 | Effect of drying temperature variations on the morphological, physical, and barrier characteristics of biofoam cups made from sugarcane bagasse and tapioca | Iop Conference Series Earth and Environmental Science | 1 January 2025 | Conference Proceedin |
|
|
| 80 | The impact of materials and design on achieving thermal comfort in Acehnese traditional architecture: An approach to achieve sustainability | Ecological Engineering and Environmental Technology | 1 January 2025 | Journal |
|
|
| 81 | Effects of heat input on mechanical properties, microstructures and thermal conductivity of copper alloy in gas tungsten arc welding technology | Advances in Science and Technology Research Journal | 1 January 2025 | Journal |
|
|
| 82 | Thermal comfort in Acehnese traditional houses: an analysis of environmental adaptation and façade performance | Iop Conference Series Earth and Environmental Science | 1 January 2025 | Conference Proceedin |
|
|
| 83 | The Effect of Solution Heat Treatment Temperature on the Hardness of AA6061 Alloy in the TIG Welding Process | Materials Science Forum | 1 January 2025 | Book Series |
|
|
| 84 | Mechanical and metallurgical properties of GTAW dissimilar welds between SUS304 and SA213T11 using ER308 filler metal, preliminary study | Advances in Science and Technology Research Journal | 1 January 2025 | Journal |
|
|
| 85 | Refugee camp: Is it well-designed for providing thermal comfort? (A case study in warm humid climateâIndonesia) | Iop Conference Series Earth and Environmental Science | 1 January 2025 | Conference Proceedin |
|
|
| 86 | Hot Tearing Evaluation of Al-0.9Mg-0.7Si Aluminium-cast Alloy | Archives of Foundry Engineering | 1 January 2025 | Journal |
|
|
| 87 | Catalytic pyrolysis of mixed plastic waste for the production of liquid fuels | Iop Conference Series Earth and Environmental Science | 1 January 2025 | Conference Proceedin |
|
|
| 88 | Optimal Power Flow-Assisted Unit Commitment with Multi-Level Load Variation Analysis in Renewable-Based Power Systems | Energies | 1 Desember 2025 | Journal |
|
|
| 89 | Experimental study of fly ash Nagan Raya as a cement replacement in the properties of mortar | Aip Conference Proceedings | 30 October 2025 | Conference Proceedin |
|
|
| 90 | Analysis of Inhibiting Factors in Shipyards in Classterizing Shipyards on the Northen Coastal of ACEH Indonesia Using the Fuzzy AHP Method: A Preliminary Study | Transnav | 1 June 2024 | Journal |
|
|
| 91 | FATIGUE STRENGTH OF Al-Cu CAST ALLOY WITH DIFFERENT POURING TEMPERATURE | Metalurgija | 1 January 2024 | Journal |
|
|
| 92 | Evaluation of tensile strength of fibreglass composites-hybrid due to differences in sand size | Multidisciplinary Science Journal | 1 January 2024 | Journal |
|
|
| 93 | The influence of different fiber sizes on the flexural strength of natural fiber-reinforced polymer composites | Results in Materials | 1 March 2024 | Journal |
|
|
| 94 | Identification of geothermal potential zone associated with land surface temperature derived from Landsat 8 data using split-window algorithm | Journal of Applied Research and Technology | 29 February 2024 | Journal |
|
|
| 95 | The influence of the number of fishing fleets on the growth of fishery production in an effort to determine shipyard clusters using linear regression | Bio Web of Conferences | 15 January 2024 | Conference Proceedin |
|
|
| 96 | Aceh Traditional Boat Modification Using Fiberglass Material | Journal of Maritime Research | 30 August 2024 | Journal |
|
|
| 97 | The effect of heat input on tensile strength, Vickers hardness, and microstructure on DMW of AISI 1015 and 304L SS through the GMAW process | Journal of Achievements in Materials and Manufacturing Engineering | 1 March 2024 | Journal |
|
|
| 98 | The effect of differences in fiber sizes on the cutting force during the drilling process of natural fiber-reinforced polymer composites | Results in Engineering | 1 Desember 2024 | Journal |
|
|
| 99 | Experimental Investigation of the Horizontal Axis Wind Turbine with NACA4418 Blade Length | Journal of Ecological Engineering | 1 January 2024 | Journal |
|
|
| 100 | Clinical observation, imaging, and histopathology of 3D polypropylene mesh for abdominal hernia in rabbits | Indian Journal of Animal Sciences | 1 August 2023 | Journal |
|
|
| 101 | Preparation and characterization of indoor heat blockage panel composites made of polyurethane-hybrid-foam-concrete and rice-husk-ash | Heliyon | 1 August 2023 | Journal |
|
|
| 102 | Minimizing Power Losses for Distributed Generation (DG) Placements by Considering Voltage Profiles on Distribution Lines for Different Loads Using Genetic Algorithm Methods | Energies | 1 July 2023 | Journal |
|
|
| 103 | Evaluation of the roundness quality of galvanized steel plate due to variations in cutting speed and nozzle diameter during the laser cutting | Journal of Achievements in Materials and Manufacturing Engineering | 1 June 2023 | Journal |
|
|
| 104 | Analysis of Inhibiting Factors in Shipyards in Clusterizing Shipyards on the Northern Coast of Aceh Indonesia Using the Fuzzy AHP Method â A Preliminary Study | Ecological Engineering and Environmental Technology | 1 January 2023 | Journal |
|
|
| 105 | Heat Transfer Properties of Hybrid Foam Panel Composite | Aip Conference Proceedings | 7 Desember 2023 | Conference Proceedin |
|
|
| 106 | Chemical, Physical and Mechanical Properties of Hybrid Foam Concrete Panels Made of Polyurethane and white Portland Cement | Iranian Journal of Chemistry and Chemical Engineering | 1 Desember 2023 | Journal |
|
|
| No | Title | Publication | Date | Type | url | |
|---|---|---|---|---|---|---|
| 1 | Agricultural Droughts Monitoring of Aceh Besar Regency Rice Production Center, Aceh, Indonesia - Application Vegetation Conditions Index using Sentinel-2 Image Data | JOURNAL OF ECOLOGICAL ENGINEERING | 2023 | Journal |
|
|
| 2 | EVALUATION OF CAST DEFECTS IN SHIP PROPELLER OF RECYCLED ALUMINUM ALLOY | METALURGIJA | APR 2022 | Journal |
|
|
| 3 | Hot Tearing, Parameters, and Mould Types for Observation - Review | ARCHIVES OF FOUNDRY ENGINEERING | 2022 | Journal |
|
|
| 4 | The Effect of Electrode Type on The Tensile Strength Characteristics of Welded Joints Between SA.240 Tp.304 Stainless Steel and SA.36 Carbon Steel Alloys through SMAW Welding Process | INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING | 2022 | Journal |
|
|
| 5 | EXPERIMENTAL INVESTIGATION ON HARDNESS, TENSILE STRENGTH, AND MICROSTRUCTURE OF Al-3,1Cu CAST-ALLOY AFTER T6-TEMPERED | METALURGIJA | JUL 2022 | Journal |
|
|
| 6 | IMPACT TOUGHNESS OF ASTM A36 LOW CARBON STEEL BY METAL ACTIVE GAS (MAG) WELDING PROCESS USING DIFFERENT COOLING MEDIA | METALURGIJA | JUL 2022 | Journal |
|
|
| 7 | Evaluation of Welding Distortion and Hardness in the A36 Steel Plate Joints Using Different Cooling Media | SUSTAINABILITY | FEB 2022 | Journal |
|
|
| 8 | Oceanographic Factors as the Indicators for Shipyard Industry Development in Kutaraja Fishing Port: A Preliminary Study | JOURNAL OF ECOLOGICAL ENGINEERING | SEP 2021 | Journal |
|
|
| 9 | EFFECT OF POURING TEMPERATURE ON IMPACT TOUGHNESS ON BRASS (Cu-Zn) THROUGH METAL CASTING | METALURGIJA | JUL 2021 | Journal |
|
|
| 10 | INFLUENCE OF SHOT PEENING ON SURFACE PROPERTIES AND CORROSION RESISTANCE OF IMPLANT MATERIAL AISI 3161 | METALURGIJA | JUL 2020 | Journal |
|
|
| 11 | HEAT TREATMENT T4 AND T6 EFFECTS ON MECHANICAL PROPERTIES IN AL-CU ALLOY AFTER REMELT WITH DIFFERENT POURING TEMPERATURES | METALURGIJA | APR 2020 | Journal |
|
|
| 12 | FATIGUE CRACK GROWTH RATE OF MOTORCYCLE WHEEL FABRICATED BY CENTRIFUGAL CASTING | METALURGIJA | JAN 2019 | Journal |
|
|
| 13 | MgH<sub>2</sub>-SiC based hydrogen storage material prepared by reactive mechanical alloying method | 2ND INTERNATIONAL TROPICAL RENEWABLE ENERGY CONFERENCE (I-TREC) 2017 | 2018 | Book in series |
|
|
| 14 | EFFECT OF SHOT PEENIN G AT DIFFERENT ALMEN INTENSITIES ON FATIGUE BEHAVIOR OF AISI 304 | METALURGIJA | 2018 | Journal |
|
|
| 15 | Stress Analysis on Mechanical Hand Prototype with Kinematics Model Approach and Performance Tests | DISRUPTIVE INNOVATION IN MECHANICAL ENGINEERING FOR INDUSTRY COMPETITIVENESS | 2018 | Book in series |
|
|
| 16 | Investigation of turbine ventilator performance after added wind cup for room exhaust air applications | 7TH AIC-ICMR ON SCIENCES AND ENGINEERING 2017 | 2018 | Book in series |
|
|
| 17 | Stress and strain analysis from dynamic loads of mechanical hand using finite element method | 7TH AIC-ICMR ON SCIENCES AND ENGINEERING 2017 | 2018 | Book in series |
|
|
| 18 | MODIFICATION OF CONSTRAINED ROD CASTING MOLD FOR NEW HOT TEARING MEASUREMENT | ARCHIVES OF METALLURGY AND MATERIALS | 2018 | Journal |
|
|
| 19 | Hot tearing susceptibility of aluminum alloys using CRCM-Horizontal mold | RESULTS IN PHYSICS | 2017 | Journal |
|
|
| 20 | Magnetic Behavior of Natural Magnetite (Fe<sub>3</sub>O<sub>4</sub>) Extracted from Beach Sand Obtained by Mechanical Alloying Method | INTERNATIONAL SYMPOSIUM ON CURRENT PROGRESS IN MATHEMATICS AND SCIENCES 2016 (ISCPMS 2016) | 2017 | Book in series |
|
|
| 21 | Analysis of tsunami disaster map by Geographic Information System (GIS): Aceh Singkil-Indonesia | 10TH ACEH INTERNATIONAL WORKSHOP AND EXPO ON SUSTAINABLE TSUNAMI DISASTER RECOVERY (AIWEST-DR 2016) | 2017 | Book in series |
|
|
| 22 | STUDY ON COOLING CURVE BEHAVIOR DURING SOLIDIFICATION AND INVESTIGATION OF IMPACT STRENGTH AND HARDNESS OF RECYCLED AL-ZN ALUMINUM ALLOY | INTERNATIONAL JOURNAL OF METALCASTING | OCT 2016 | Journal |
|
|
| 23 | Experimental Investigation on Open Sun-drying and Solar Drying System of Bilimbi | 2016 6TH INTERNATIONAL ANNUAL ENGINEERING SEMINAR (INAES) | 2016 | Book |
|
|
| 24 | Effect of T6 Heat Treatment and Artificial Aging on Mechanics and Fatigue Properties of A356.0 Aluminum Alloy Produced by 350 rpm Centrifugal Casting | 2016 6TH INTERNATIONAL ANNUAL ENGINEERING SEMINAR (INAES) | 2016 | Book |
|
|
| 25 | Fungistatic effect of <i>Moringa oleifera</i> Lam. on the metabolism changes of <i>Candida albicans</i> | JOURNAL OF PHARMACY & PHARMACOGNOSY RESEARCH | JAN-FEB 2023 | Journal |
|
|
| 26 | A review of vortex water turbine design for sustainable energy generation (principles, optimization, and validation) | ENERGY CONVERSION AND MANAGEMENT-X | APR 2025 | Journal |
|
|
| 27 | The Thermal Comfort Performance in an Indonesian Refugee Tent: Existing Conditions and Redesigns | ENERGIES | MAR 2025 | Journal |
|
|
| 28 | Analysis of Inhibiting Factors in Shipyards in Classterizing Shipyards on the Northen Coastal of ACEH Indonesia Using the Fuzzy AHP Method: A Preliminary Study | TRANSNAV-INTERNATIONAL JOURNAL ON MARINE NAVIGATION AND SAFETY OF SEA TRANSPORTATION | JUN 2024 | Journal |
|
|
| 29 | Experimental Investigation of the Horizontal Axis Wind Turbine with NACA4418 Blade Length | JOURNAL OF ECOLOGICAL ENGINEERING | 2024 | Journal |
|
|
| 30 | Deep artificial intelligence applications for natural disaster management systems: A methodological review | ECOLOGICAL INDICATORS | JUN 2024 | Journal |
|
|
| 31 | The effect of differences in fiber sizes on the cutting force during the drilling process of natural fiber-reinforced polymer composites | RESULTS IN ENGINEERING | DEC 2024 | Journal |
|
|
| 32 | Effect of Superheat on Hot Tearing Susceptibility in Re-melted 6061 Aluminum Alloy | INTERNATIONAL JOURNAL OF METALCASTING | DEC 19 2024 | Journal |
|
|
| 33 | Minimizing Power Losses for Distributed Generation (DG) Placements by Considering Voltage Profiles on Distribution Lines for Different Loads Using Genetic Algorithm Methods | ENERGIES | JUL 2023 | Journal |
|
|
| 34 | Identification Shipyard Model Suitable for Kutaraja Fishing Port in Aceh, Indonesia | POLISH JOURNAL OF ENVIRONMENTAL STUDIES | 2023 | Journal |
|
|
| 35 | Preparation and characterization of indoor heat blockage panel composites made of polyurethane-hybrid-foam-concrete and rice-husk-ash | HELIYON | AUG 2023 | Journal |
|
|
| 36 | Effect of variations in pouring temperature on tensile strength of CuZn cast alloys | MATERIALS LETTERS-X | MAR 2023 | Journal |
|
|
| 37 | Clinical observation, imaging, and histopathology of 3D polypropylene mesh for abdominal hernia in rabbits | INDIAN JOURNAL OF ANIMAL SCIENCES | AUG 2023 | Journal |
|
|
| 38 | Chemical, Physical and Mechanical Properties of Hybrid Foam Concrete Panels Made of Polyurethane and white Portland Cement | IRANIAN JOURNAL OF CHEMISTRY & CHEMICAL ENGINEERING-INTERNATIONAL ENGLISH EDITION | DEC 2023 | Journal |
|
|
| 39 | Naive Bayes Method for Classification of Student Interest Based on Website Accessed | UNIVERSITAS RIAU INTERNATIONAL CONFERENCE ON SCIENCE AND ENVIRONMENT 2020 (URICSE-2020) | 2020 | Book in series |
|
|
| 40 | History of Breastfeeding in Stunting Children Aged 0-24 Months in Tualang Village Tualang District, Siak Regency, Riau Province | ANNALS OF NUTRITION AND METABOLISM | 2019 | Journal |
|
|
| 41 | Food Security on Stunting and Not Stunting Children Family in Tualang District, Siak Regency, Riau Province | ANNALS OF NUTRITION AND METABOLISM | 2019 | Journal |
|
|
| 42 | Desorption behaviour of MgH<sub>2</sub>-Ni-SiC prepared by ball milling for hydrogen storage material application | 2ND INTERNATIONAL CONFERENCE ON CURRENT PROGRESS IN FUNCTIONAL MATERIALS 2017 | 2019 | Book in series |
|
|
| 43 | Implementation of Advanced Encryption Standard (AES) and QR Code Algorithm on Digital Legalization System | 3RD INTERNATIONAL CONFERENCE ON ENERGY, ENVIRONMENTAL AND INFORMATION SYSTEM (ICENIS 2018) | 2018 | Book in series |
|
|
| 44 | National Movement of Mental Revolution in Developing Character Education of Indonesian Generation | PROCEEDINGS OF THE ANNUAL CIVIC EDUCATION CONFERENCE (ACEC 2018) | 2018 | Book in series |
|
|
| No | Title | Publisher | Source | Date | url | |
|---|---|---|---|---|---|---|
| 1 | Economic Impact Analysis Versus Investment Analysis: Cast-Bike Frame Manufacturing from Recycled Aluminum Alloy | Jurnal Teknik Mesin Unsyiah | Jurnal Teknik Mesin Unsyiah | 27 June 2021 |
|
|
| 2 | PENCEGAHAN PENULARAN VIRUS KORONA DEMI MENJAGA KEAMANAN DAN KENYAMANAN TENAGA MEDIS RUMAH SAKIT UMUM DAERAH (RSUD) LANGSA MELALUI PENGGUNAAN PELINDUNG WAJAH (FACE SHIELD) | Politeknik Negeri Lhokseumawe | Jurnal Vokasi | 1 October 2020 |
|
|
| 3 | The Use of SST Anomaly to Predict Seasonal Rainfall during the Second Planting Period in the Tanoh Abee Irrigation Area, Aceh Besar | PERHIMPI (Indonesian Association of Agricultural Meteorology) | Agromet | 30 September 2020 |
|
|
| 4 | Produksi Baling-Baling Kapal dari Logam Daur Ulang melalui Teknik Pengecoran Logam | Jurnal Teknik Mesin Unsyiah | Jurnal Teknik Mesin Unsyiah | 27 Desember 2020 |
|
|
| 5 | Desain dan Analisis Rangka Mobil Listrik Malem Diwa X.2 Model Prototype Menggunakan Metode Elemen Hingga | Jurnal Teknik Mesin Unsyiah | Jurnal Teknik Mesin Unsyiah | 11 July 2019 |
|
|
| 6 | Perancangan dan Pembuatan Dapur Peleburan Logam dengan Menggunakan Bahan Bakar Gas (LPG) | Jurnal Teknik Mesin Unsyiah | Jurnal Teknik Mesin Unsyiah | 23 June 2013 |
|
|
| 7 | Pengaruh Komposisi Paduan Al-Si Terhadap Kerentanan Hot Tearing | Jurnal Teknik Mesin Unsyiah | Jurnal Teknik Mesin Unsyiah | 26 July 2012 |
|
|
| 8 | Variasi Pasta dan Essence Kakao Pada Proses Pembuatan Sabun Cair | Fakultas Pertanian, Universitas Syiah Kuala | Jurnal Ilmiah Mahasiswa Pertanian | 1 February 2018 |
|
|
| 9 | THE EFFECT OF PERFORMANCE EXPECTATIONS, EFFORT EXPECTATIONS, FACILITATING CONDITIONS AND SOCIAL INFLUENCE ON BEHAVIOR INTENTION TO PAY ZAKAT THROUGH THE QRIS DIGITAL PLATFORM IN BAITUL MAL ACEH | Pusat Riset Kita Kreatif | International Journal of Kita Kreatif | 30 November 2024 |
|
|
| 10 | Investigating the Effects of Solution Treatment Parameters and Artificial Aging on Hardness Improvement of Precipitation-Hardened 6061 Aluminum Alloy | Politeknik Negeri Lhokseumawe | Jurnal Polimesin | 31 August 2025 |
|
|
| 11 | Numerical-hydrodynamic analysis, vickers hardness, and tensile test of cast-brass alloy for boat propellers | Politeknik Negeri Lhokseumawe | Jurnal POLIMESIN | 25 April 2023 |
|
|
| 12 | Experimental and Simulation Evaluation of Temperature and Air Flow in Tunnel-Type Dryers: Preliminary Study | Politeknik Negeri Lhokseumawe | Jurnal POLIMESIN | 28 February 2022 |
|
|
| No | Title | Publication | Year | url | |
|---|---|---|---|---|---|
| 1 | Stress and strain analysis of UAV hexacopter frame using finite element method | AIP conference proceedings 2613 (1), 020005, 2023 | 2023 |
|
|
| 2 | Impact of pouring temperature on the mechanical properties of Al5.9Cu1.9Mg alloy | Archives of Materials Science and Engineering 113 (2), 49-55, 2023 | 2023 |
|
|
| 3 | Evaluation of cast defects in ship propeller of recycled aluminum alloy | Metalurgija 61 (2), 309-312, 2022 | 2022 |
|
|
| 4 | Evaluation of welding distortion and hardness in the A36 steel plate joints using different cooling media | Sustainability 14 (3), 1405, 2022 | 2022 |
|
|
| 5 | Experimental and Simulation Evaluation of Temperature and Air Flow in Tunnel-Type Dryers: Preliminary Study | Jurnal Polimesin. Vol 20 (1), 55, 2022 | 2022 |
|
|
| 6 | Metode Pembentukan Logam (Metal Forming) untuk Pembuatan Rangka Sepeda dari Plat Logam | ID Patent S00,201,703,611, 2022 | 2022 |
|
|
| 7 | The Strength Enhancement Mechanisms of Aluminum and Its Alloys | Recent Trends in Chemical and Material Sciences 8, 19-28, 2022 | 2022 |
|
|
| 8 | Physic-Chemical Parameter of Water Around Kutaraja Fishing Port: A Preliminary Study for Shipyard Industry Development | Proceedings of the 3rd International Conference on Experimental and …, 2022 | 2022 |
|
|
| 9 | Effect of welding repair on mechanical properties of ASTM A36 carbon steel weld joints | Jurnal Polimesin 20 (2), 217-221, 2022 | 2022 |
|
|
| 10 | Numerical Analysis of Small-Scale Horizontal Type Wind Turbine Using the Computational Fluids Dynamics (CFD) Method | Proceedings of the 3rd International Conference on Experimental and …, 2022 | 2022 |
|
|
| 11 | Differences in Pour Temperature Affect Hardness Properties of CuZn Brass Alloy through Metal Casting | IOP Conference Series: Materials Science and Engineering 1082 (1), 012001, 2021 | 2021 |
|
|
| 12 | Ultrasound and Radiograph Mesh Hernia Graft 3D Imaging Correlation; Study in Rabbits | Series:Advances in Biological Sciences Research, Proceedings of the 2nd â¦, 2021 | 2021 |
|
|
| 13 | Effect of pouring temperature on impact toughness on brass (Cu-Zn) through metal casting | Metalurgija 60 (3-4), 223-226, 2021 | 2021 |
|
|
| 14 | CFD Investigation on Aerodynamic Characteristics and Performance of Windmill Aerator Type Savonius Four Blade | Proceedings of the 2nd International Conference on Experimental and â¦, 2021 | 2021 |
|
|
| 15 | FAE Analysis of Boat Propeller with Differences of Loading Conditions and Manufacturing by Casting Process | Proceedings of the 2nd International Conference on Experimental and â¦, 2021 | 2021 |
|
|
| 16 | Numerical Analysis of Traditional Aceh Fishing Boat with Various Scenario Loading and Hull Thickness, Manufacturing by Metal Plasma Cutting and Welding | Proceedings of the 2nd International Conference on Experimental and â¦, 2021 | 2021 |
|
|
| 17 | Nanomagnetite Extraction from Iron Sand Prepared by Mechanical Alloying Method | Key Engineering Materials 892, 129-133, 2021 | 2021 |
|
|
| 18 | The Effect of Tool Rotation Speed on Hardness, Tensile Strength, and Microstructure of Dissimilar Friction Stir Welding of Dissimilar AA5083 and AA6061-T6 Alloys | Key Engineering Materials 892, 159-168, 2021 | 2021 |
|
|
| 19 | Economic Impact Analysis Versus Investment Analysis: Cast-Bike Frame Manufacturing from Recycled Aluminum Alloy | Jurnal Teknik Mesin 9 (1), 1-8, 2021 | 2021 |
|
|
| 20 | Oceanographic Factors as the Indicators for Shipyard Industry Development in Kutaraja Fishing Port: A Preliminary Study | Journal of Ecological Engineering 2021, 22(9), 237â245 22 (No. 9), p. 237-245, 2021 | 2021 |
|
|
| 21 | Surface Roughness and Hardness Characteristic of 2024 Aluminum Alloy by Electroplating Ni-Cr | Journal of Physics: Conference Series 2000 (1), 012009, 2021 | 2021 |
|
|
| 22 | Numerical Simulation of Physical-Mechanical Properties Based on the Composition of GTAW Weld Metal Alloys with Dissimilar Base Metals | Key Engineering Materials 892, 150-158, 2021 | 2021 |
|
|
| 23 | Increase the Heating Capacity of Solar Water Heaters by Placing Paraffin in Copper Tubes under Two Conditions | New Approaches in Engineering Research 8, 1-15, 2021 | 2021 |
|
|
| 24 | Alat Pembuatan Velg Sepeda Motor Melalui Teknik Pengecoran Sentrifugal Sinusoidal | ID Patent IDS000,003,741, 2021 | 2021 |
|
|
| 25 | Correction to: Proceedings of the 2nd International Conference on Experimental and Computational Mechanics in Engineering | Proceedings of the 2nd International Conference on Experimental and …, 2021 | 2021 |
|
|
| 26 | Heat treatment T4 and T6 effects on mechanical properties in Al-Cu alloy after remelt with different pouring temperatures | Metalurgija 59 (2), 171-174, 2020 | 2020 |
|
|
| 27 | Influence of shot peening on surface properties and corrosion resistance of implant material AISI 316L | Metalurgija 59 (3), 309-312, 2020 | 2020 |
|
|
| 28 | Fatigue Behavior Improvement of A356 Aluminum Alloy of Motorcycle Cast Wheel Produced by High Speed Centrifugal Casting Based on T6 Heat Treatment and Artificial Aging | Materials Science Forum 991, pp 86-93, 2020 | 2020 |
|
|
| 29 | Study on fracture failures of the super heater water pipe boiler | Defect and Diffusion Forum 402, 20-26, 2020 | 2020 |
|
|
| 30 | Numerical Simulation of the Effect of Shoulder Rotation on the Tensile Strength of FSW Dissimilar Joints of Aluminum Alloy | Defect and Diffusion Forum 402, 90-99, 2020 | 2020 |
|
|
| 31 | Effect of different gating systems and sand mold binder on the cast-quality of bicycle frame produced through sand casting method | Defect and diffusion forum 402, 100-107, 2020 | 2020 |
|
|
| 32 | The Use of SST Anomaly to Predict Seasonal Rainfall during the Second Planting Period in the Tanoh Abee Irrigation Area, Aceh Besar | Agromet 34 (2), 100-109, 2020 | 2020 |
|
|
| 33 | PENCEGAHAN PENULARAN VIRUS KORONA DEMI MENJAGA KEAMANAN DAN KENYAMANAN TENAGA MEDIS RUMAH SAKIT UMUM DAERAH (RSUD) LANGSA MELALUI PENGGUNAAN PELINDUNG WAJAH (FACE SHIELD) | Jurnal Vokasi 4 (2), 75-85, 2020 | 2020 |
|
|
| 34 | Desorption properties of mechanically milled MgH2 with double catalysts Ni and SiC | IOP Conference Series: Materials Science and Engineering 931 (1), 012012, 2020 | 2020 |
|
|
| 35 | The Design of Rowing Ergometer Based on the Anthropometry of Acehnese Male Athletes | IOP Conf. Series: Materials Science and Engineering 931 (1), pp. 012022, 2020 | 2020 |
|
|
| 36 | Distribution of Hardness, Surface Roughness and Wettability of AISI 316L Induced by Shot Peening with Different Duration and Shooting Distance | IOP Conference Series: Materials Science and Engineering 924 (1), 012008, 2020 | 2020 |
|
|
| 37 | Effect of Differences in Cover Materials to Improve the Performance of Water Heaters | TEST Engineering and Management 83, 71-76, 2020 | 2020 |
|
|
| 38 | Fatigue crack growth rate of motorcycle wheel fabricated by centrifugal casting | Metalurgija 58 (1-2), 51-54, 2019 | 2019 |
|
|
| 39 | Desorption behaviour of MgH2-Ni-SiC prepared by ball milling for hydrogen storage material application | IOP Conference Series: Materials Science and Engineering 496 (1), 012062, 2019 | 2019 |
|
|
| 40 | Desain dan Analisis Rangka Mobil Listrik Malem Diwa X. 2 Model Prototype Menggunakan Metode Elemen Hingga | Jurnal Teknik Mesin 7 (1), 10-14, 2019 | 2019 |
|
|
| 41 | Increase the heating capacity of solar water heaters through two conditions of placing paraffin in copper tubes | IOP Conference Series: Materials Science and Engineering 523 (1), 012077, 2019 | 2019 |
|
|
| 42 | Experiment on Hardness and Impact Strength of Recycled Aluminum Alloys by Metal Casting Process | Materials Science Forum 961, 65-72, 2019 | 2019 |
|
|
| 43 | The effect of solar water heater performance by variation of the plate shaped | IOP Conference Series: Materials Science and Engineering 602 (1), 012081, 2019 | 2019 |
|
|
| 44 | The experimental performance of the semi-cylindrical type of solar concentrator collector on the addition of heat storage material | IOP Conference Series: Materials Science and Engineering 602 (1), 012082, 2019 | 2019 |
|
|
| 45 | Structural Simulations of Bicycle Frame Behaviour under Various Load Conditions | Materials Science Forum 961, pp. 137-147, 2019 | 2019 |
|
|
| 46 | The Production of Rencong Souvenir Based on Reused Brass Metal Waste | Journal of Technomaterials Physics 1 (2), 119-124, 2019 | 2019 |
|
|
| 47 | MgH2-SiC based hydrogen storage material prepared by reactive mechanical alloying method | IOP Conference Series: Earth and Environmental Science 105 (1), 012098, 2018 | 2018 |
|
|
| 48 | Stress and strain analysis from dynamic loads of mechanical hand using finite element method | IOP Conference Series: Materials Science and Engineering 352 (1), 012017, 2018 | 2018 |
|
|
| 49 | Stress analysis on mechanical hand prototype with kinematics model approach and performance tests | AIP Conference Proceedings 1983 (Issue 1), 030001: 1-6, 2018 | 2018 |
|
|
| 50 | Investigation of turbine ventilator performance after added wind cup for room exhaust air applications | The 7th AIC?ICMR on Sciences and Engineering 2017 352, 1-5, 2018 | 2018 |
|
|
| 51 | Hydrogen storage properties of mechanical milled MgH2-nano Ni for solid hydrogen storage material | IOP Conference Series: Materials Science and Engineering 432 (1), 012034, 2018 | 2018 |
|
|
| 52 | Effect of shot peening at different almen intensities on fatigue behavior of AISI 304 | Metalurgija 57 (4), 295-298, 2018 | 2018 |
|
|
| 53 | MODIFICATION OF CONSTRAINED ROD CASTING MOLD FOR NEW HOT TEARING MEASUREMENT | Archives of Metallurgy and Materials 63 (3), 1201-1208, 2018 | 2018 |
|
|
| 54 | Cooling Rate, Hardness and Microstructure of Aluminum Cast Alloys | Materials Science: Materials Review 1 (1), 2018 | 2018 |
|
|
| 55 | Effect of shot peening on microstructure, hardness, and corrosion resistance of AISI 316L | Journal of Achievements in materials and manufacturing Engineering 89 (1), 2018 | 2018 |
|
|
| 56 | Pengaruh Variasi Suhu Tuang dengan Heat Treatment T4 terhadap Sifat Mekanis pada Aluminium Paduan 2024 | 2018 |
|
|
|
| 57 | Non Treatment, T4 and T6 on Tensile Strength of Al-5.9Cu-1.9Mg Alloy Investigated by Variation of Casting Temperature | Materials Science Forum 929, 56-62, 2018 | 2018 |
|
|
| 58 | Hot tearing susceptibility of aluminum alloys using CRCM-Horizontal mold | Results in physics 7, 1030-1039, 2017 | 2017 |
|
|
| 59 | Magnetic behavior of natural magnetite (Fe3O4) extracted from beach sand obtained by mechanical alloying method | AIP Conference Proceedings 1862 (1), 030023, 2017 | 2017 |
|
|
| 60 | Analysis of Tsunami disaster map by geographic information system (GIS): Aceh Singkil-Indonesia | IOP conference series: earth and environmental science 56 (1), 012002, 2017 | 2017 |
|
|
| 61 | Study on Cooling Curve Behavior During Solidification and Investigation of Impact Strength and Hardness of Recycled Al–Zn Aluminum Alloy | International Journal of Metalcasting 10 (34), 2016 | 2016 |
|
|
| 62 | Experimental investigation on open sun-drying and solar drying system of bilimbi | Conference: 2016 6th International Annual Engineering Seminar (InAES), pp â¦, 2016 | 2016 |
|
|
| 63 | Effect of T6 heat treatment and artificial aging on mechanics and fatigue properties of A356. 0 aluminum alloy produced by 350 rpm centrifugal casting | 2016 6th International Annual Engineering Seminar (InAES), 223-227, 2016 | 2016 |
|
|
| 64 | Investigasi Perbedaan Suhu Tuang Terhadap Sifat Mekanik dengan Pengukuran Kekerasan dan Impact pada Paduan Al 2024 | ROTOR, 74-78, 2016 | 2016 |
|
|
| 65 | Performance investigation and development of solar dryer tunnel type apparatus of Cocoa | Proceedings of International Conference on Engineering and Science for …, 2016 | 2016 |
|
|
| 66 | Cooling Rate Investigation and the Influence of Pouring Temperature on Hardness Properties of As-Cast Aluminum Alloys | Proceedings of International Conference on Engineering and Science for â¦, 2016 | 2016 |
|
|
| 67 | Effect Pouring Temperature on Casting Defect Susceptibility of Hot Tearing in Metal Alloy Al-Si | Applied Mechanics and Materials 758, 95-99, 2015 | 2015 |
|
|
| 68 | Perancangan dan Pembuatan Tungku Peleburan Logam dengan Pemanfaatan Oli Bekas sebagai Bahan Bakar | Seminar Nasional Sains dan Teknologi (SEMNASTEK) 2014 1, 1-6, 2014 | 2014 |
|
|
| 69 | Penerapan Teknologi Pengecoran Logam untuk Pembuatan Souvenir Rencong | Seminar Nasional ke-9: Rekayasa Teknologi Industri dan Informasi, At â¦, 2014 | 2014 |
|
|
| 70 | Variasi Komposisi Silikon dalam Paduan Aluminium Terhadap Kerentanan Hot Tearing | Journal Foundry 3 (1), 1-4, 2013 | 2013 |
|
|
| 71 | Perancangan dan Pembuatan Dapur Peleburan Logam dengan Menggunakan Bahan Bakar Gas (LPG) | Jurnal Teknik Mesin Unsyiah 1 (3), 128-132, 2013 | 2013 |
|
|
| 72 | Community collection of ocean current data: an example from Northern Aceh province, Indonesia | SPC Traditional Marine Resource Management and Knowledge Information …, 2013 | 2013 |
|
|
| 73 | PENGARUH KOMPOSISI SILIKON DAN TEMPERATUR TUANG TERHADAP KERENTANAN HOT TEARING PADA Al-Si DENGAN CETAKAN CONSTRAIN ROD CASTING MODIFED HORIZONTAL | Universitas Gadjah Mada, 2012 | 2012 |
|
|
| 74 | Pengaruh Komposisi Paduan Al-Si Terhadap Kerentanan Hot Tearing - Akhyar, - Suyitno | Jurnal Teknik Mesin Unsyiah 1 (1), 1-6, 2012 | 2012 |
|
|
| 75 | Community Based Bathymetry Survey | 2009 |
|
|
|
| 76 | Collecte communautaire de données sur les courants océaniques: un exemple dans la province septentrionale indonésienne d’Aceh |
|
|
||
| 77 | Numerical Analysis of Traditional Aceh Fishing Boat with Various Scenario Loading and Hull Thickness, Manufacturing by Metal Plasma Cutting and Welding | Proceedings of the 2nd International Conference on Experimental and â¦, 0 |
|
|
|
| 78 | Numerical Analysis of Traditional Aceh Fishing Boat with Various Scenario Loading and Hull Thickness, Manufacturing by Metal Plasma Cutting and Welding | Proceedings of the 2nd International Conference on Experimental and …, 0 |
|
|
|
| 79 | Collecte communautaire de données sur les courants océaniques: un exemple dans la province septentrionale indonésienne d’Aceh |
|
|
||
| 80 | Numerical Investigation of Blade-Angle Optimization in a Gravitational Water Vortex Hydro Turbine. | Mathematical Modelling of Engineering Problems 13 (2), 289, 2026 | 2026 |
|
|
| 81 | Natural fiber-based partially and spiral confinement: A sustainable solution for improving reinforced concrete column performance | Advances in Science and Technology. Research Journal 20 (1), 2026 | 2026 |
|
|
| 82 | Development of an artificial intelligence model based on MobileNetV3 for early detection of dental caries using smartphone images: A preliminary study | Advances in Science and Technology. Research Journal 19 (4), 2025 | 2025 |
|
|
| 83 | A review of vortex water turbine design for sustainable energy generation (principles, optimization, and validation) | Energy Conversion and Management: X, 100895, 2025 | 2025 |
|
|
| 84 | The thermal comfort performance in an Indonesian refugee tent: Existing conditions and redesigns | Energies 18 (5), 1249, 2025 | 2025 |
|
|
| 85 | Variations in casting temperatures effect of re-melted 6061 aluminum alloy on tensile strength | Results in Materials 26, 100691, 2025 | 2025 |
|
|
| 86 | The influence of water velocity and blade number variation on the performance of water vortex turbines | Multidisciplinary Science Journal, 2025 | 2025 |
|
|
| 87 | Computational Analysis of Pressure Distribution of Traditional Aceh Boat Hull Attributed to Speed Variations | Journal of Maritime Research 22 (1), 232-239, 2025 | 2025 |
|
|
| 88 | Enhancing Capacity and Ductility of Reinforced Concrete Column by Partially Wrapped Natural Fiber Reinforced Polymer | E3S Web of Conferences 621, 01006, 2025 | 2025 |
|
|
| 89 | The Effect of Solution Heat Treatment Temperature on The Hardness of AA6061 Alloy in The TIG Welding Process | Materials Science Forum 1150, 59-66, 2025 | 2025 |
|
|
| 90 | Hot tearing evaluation of Al-0.9 Mg-0.7 Si aluminium-cast alloy | Archives of Foundry Engineering, 74-80-74-80, 2025 | 2025 |
|
|
| 91 | Refugee camp: Is it well-designed for providing thermal comfort?(A case study in warm humid climate–Indonesia) | IOP Conference Series: Earth and Environmental Science 1477 (1), 012036, 2025 | 2025 |
|
|
| 92 | Mechanical and metallurgical properties of GTAW dissimilar welds between SUS304 and SA213T11 using ER308 filler metal, preliminary study | Advances in Science and Technology. Research Journal 19 (8), 2025 | 2025 |
|
|
| 93 | Mechanical and metallurgical properties of GTAW dissimilar welds between SUS304 and SA213T11 using ER308 filler metal, preliminary study. | Advances in Science & Technology Research Journal 19 (8), 2025 | 2025 |
|
|
| 94 | Catalytic pyrolysis of mixed plastic waste for the production of liquid fuels | IOP Conference Series: Earth and Environmental Science 1510 (1), 012098, 2025 | 2025 |
|
|
| 95 | Artificial intelligence for dental caries detection: A mixup, fine-tuning, and quantization approach on the MobileNetV2 model | Journal of Conservative Dentistry and Endodontics 28 (8), 764-771, 2025 | 2025 |
|
|
| 96 | Effects of heat input on mechanical properties, microstructures and thermal conductivity of copper alloy in gas tungsten arc welding technology. | Advances in Science & Technology Research Journal 19 (6), 2025 | 2025 |
|
|
| 97 | Simulations of Temperature and Wind Speed Contours and Vectors for Thermal Comfort Analysis in Worship Spaces: The Case Study of Baiturrahman Grand Mosque, Indonesia | Engineering, Technology & Applied Science Research 15 (4), 25199-25206, 2025 | 2025 |
|
|
| 98 | The impact of materials and design on achieving thermal comfort in Acehnese traditional architecture: An approach to achieve sustainability. | Ecological Engineering & Environmental Technology (EEET) 26 (8), 2025 | 2025 |
|
|
| 99 | Effect of drying temperature variations on the morphological, physical, and barrier characteristics of biofoam cups made from sugarcane bagasse and tapioca | IOP Conference Series: Earth and Environmental Science 1510 (1), 012003, 2025 | 2025 |
|
|
| 100 | Numerical analysis of thermal comfort behavior in Acehnese traditional houses in Indonesia. | Ecological Engineering & Environmental Technology (EEET) 26 (5), 2025 | 2025 |
|
|
| 101 | Numerical analysis of thermal comfort behavior in Acehnese traditional houses in Indonesia | Ecological Engineering & Environmental Technology 26 (5), 27-42, 2025 | 2025 |
|
|
| 102 | Performance improvement of self-excited induction generator using capacitor bank based on PID controller | Radioelectronic and Computer Systems 2025 (1), 199-210, 2025 | 2025 |
|
|
| 103 | Effect of superheat on hot tearing susceptibility in Re-melted 6061 aluminum alloy | International Journal of Metalcasting 19 (5), 2788-2805, 2025 | 2025 |
|
|
| 104 | Experimental study of fly ash Nagan Raya as a cement replacement in the properties of mortar | AIP Conference Proceedings 3334 (1), 070016, 2025 | 2025 |
|
|
| 105 | Optimal Power Flow-Assisted Unit Commitment with Multi-Level Load Variation Analysis in Renewable-Based Power Systems | Energies 18 (23), 6340, 2025 | 2025 |
|
|
| 106 | The impact of materials and design on achieving thermal comfort in Acehnese traditional architecture: An approach to achieve sustainability | Ecological Engineering & Environmental Technology 26 (8), 73-96, 2025 | 2025 |
|
|
| 107 | Refugee camp: Is it well-designed for providing thermal comfort?(A case study in warm humid climateâIndonesia) | IOP Conference Series: Earth and Environmental Science 1477 (1), 012036, 2025 | 2025 |
|
|
| 108 | Selection of Optimal Filler Metal for Dissimilar Welding of SA335 Gr. P11 and Incoloy 800 in Primary Reformer Tube Catalyst Repairs: A Mechanical Property Analysis | Engineering, Technology & Applied Science Research 15 (6), 29887-29893, 2025 | 2025 |
|
|
| 109 | The influence of the number of fishing fleets on the growth of fishery production in an effort to determine shipyard clusters using linear regression | BIO Web of Conferences 87, 03034, 2024 | 2024 |
|
|
| 110 | Fatigue strength of Al-Cu cast alloy with different pouring temperature | Metalurgija 63 (2), 197-200, 2024 | 2024 |
|
|
| 111 | Evaluation of tensile strength of fibreglass composites-hybrid due to differences in sand size | Multidisciplinary Science Journal 6 (6), 2024085-2024085, 2024 | 2024 |
|
|
| 112 | Analysis of inhibiting factors in shipyards in classterizing shipyards on the Northen coastal of ACEH Indonesia using the fuzzy AHP method: a preliminary study | TransNav: International Journal on Marine Navigation and Safety of Sea â¦, 2024 | 2024 |
|
|
| 113 | The effect of heat input on tensile strength, Vickers hardness, and microstructure on DMW of AISI 1015 and 304L SS through the GMAW process | Journal of Achievements in Materials and Manufacturing Engineering 123 (1), 2024 | 2024 |
|
|
| 114 | The influence of different fiber sizes on the flexural strength of natural fiber-reinforced polymer composites | Results in Materials 21, 100534, 2024 | 2024 |
|
|
| 115 | Earthquake disaster map using GIS analysis: a case study of Bener Meriah-Aceh, Indonesia | Arabian Journal of Geosciences 17 (1), 53, 2024 | 2024 |
|
|
| 116 | Experimental Investigation of the Horizontal Axis Wind Turbine with NACA4418 Blade Length | Journal of Ecological Engineering 25 (9), 272-281, 2024 | 2024 |
|
|
| 117 | Aceh traditional boat modification using fiberglass material | Journal of Maritime Research 21 (2), 166-170, 2024 | 2024 |
|
|
| 118 | The effect of differences in fiber sizes on the cutting force during the drilling process of natural fiber-reinforced polymer composites | Results in Engineering 24, 103128, 2024 | 2024 |
|
|
| 119 | Effect of superheat on hot tearing susceptibility in Re-melted 6061 aluminum alloy | International Journal of Metalcasting, 1-18, 2024 | 2024 |
|
|
| 120 | Identification of geothermal potential zone associated with land surface temperature derived from Landsat 8 data using split-window algorithm | Journal of applied research and technology 22 (1), 125-137, 2024 | 2024 |
|
|
| 121 | Identification Shipyard Model Suitable for Kutaraja Fishing Port in Aceh, Indonesia. | Polish Journal of Environmental Studies 32 (2), 2023 | 2023 |
|
|
| 122 | Effect of variations in pouring temperature on tensile strength of CuZn cast alloys | Materials Letters: X 17, 100182, 2023 | 2023 |
|
|
| 123 | Identification Shipyard Model Suitable for Kutaraja Fishing Port in Aceh, Indonesia | Polish Journal of Environmental Studies 32 (2), 1755-1766, 2023 | 2023 |
|
|
| 124 | Numerical-hydrodynamic analysis, vickers hardness, and tensile test of cast-brass alloy for boat propellers | Jurnal Polimesin 21 (2), 2023 | 2023 |
|
|
| 125 | Minimizing power losses for distributed generation (DG) placements by considering voltage profiles on distribution lines for different loads using genetic algorithm methods | Energies 16 (14), 5388, 2023 | 2023 |
|
|
| 126 | Analysis of Inhibiting Factors in Shipyards in Clusterizing Shipyards on the Northern Coast of Aceh Indonesia Using the Fuzzy AHP Method–A Preliminary Study | Ecological Engineering & Environmental Technology 24, 2023 | 2023 |
|
|
| 127 | Oceanographic studies as the basis for shipyard development at the Fish Landing Port of Sabang | Depik Jurnal 12 (2), 210-215, 2023 | 2023 |
|
|
| 128 | Preparation and characterization of indoor heat blockage panel composites made of polyurethane-hybrid-foam-concrete and rice-husk-ash | Heliyon 9 (8), 2023 | 2023 |
|
|
| 129 | Evaluation of the roundness quality of galvanized steel plate due to variations in cutting speed and nozzle diameter during the laser cutting | Journal of Achievements in Materials and Manufacturing Engineering 118 (2), 2023 | 2023 |
|
|
| 130 | Heat transfer properties of hybrid foam panel composite | AIP Conference Proceedings 2680 (1), 020055, 2023 | 2023 |
|
|
| 131 | Impact toughness of ASTM A36 low carbon steel by metal active gas (MAG) welding process using different cooling media | Metalurgija 61 (3-4), 641-644, 2022 | 2022 |
|
|
| 132 | Experimental investigation on hardness, tensile strength, and microstructure of Al-3, 1Cu cast-alloy after T6-tempered | Metalurgija 61 (3-4), 616-618, 2022 | 2022 |
|
|
| 133 | A study on the development of a fishing shipyard in Peukan Bada District, Aceh Besar using fishbone analysis: A short comunnication | Depik 11 (2), 246-251, 2022 | 2022 |
|
|
| 134 | Study on shipyard location and model development | Depik 11 (3), 288-94, 2022 | 2022 |
|
|
| 135 | Fundamental Study on Combustion Characteristics of Bio-briquette as Alternative Fuels for Domestic Coffee Stove | IOP Conference Series: Earth and Environmental Science 1121 (1), 012013, 2022 | 2022 |
|
|
| 136 | Impact of pouring temperature on the mechanical properties of Al5. 9Cu1. 9Mg alloy. | Archives of Materials Science & Engineering 113 (2), 2022 | 2022 |
|
|
| 137 | Hot Tearing, Parameters, and Mould Types for Observation–Review | Archives of Foundry Engineering 22 (2), 25-49, 2022 | 2022 |
|
|
| 138 | Hot Tearing, Parameters, and Mould Types for ObservationâReview | Archives of Foundry Engineering 22 (2), 25-49, 2022 | 2022 |
|
|
| 139 | Physic-Chemical Parameter of Water Around Kutaraja Fishing Port: A Preliminary Study for Shipyard Industry Development | International Conference on Experimental and Computational Mechanics in â¦, 2021 | 2021 |
|
|
| 140 | Numerical Analysis of Small-Scale Horizontal Type Wind Turbine Using the Computational Fluids Dynamics (CFD) Method | International Conference on Experimental and Computational Mechanics in â¦, 2021 | 2021 |
|
|
| 141 | Study on Cooling Curve Behavior During Solidification and Investigation of Impact Strength and Hardness of Recycled AlâZn Aluminum Alloy | International Journal of Metalcasting 10 (34), 2016 | 2016 |
|
|
| 142 | Pengaruh Komposisi Paduan Al-Si Terhadap Kerentanan Hot Tearing | Jurnal Teknik Mesin Unsyiah 1 (1), 1-6, 2012 | 2012 |
|
|
| 143 | Development of an Incinerator-Based Waste Management Model for Marine Pollution Mitigation | Journal of Human, Earth, and Future 7 (1), 1-18, 2006 | 2006 |
|
|
| 144 | Comprehensive Characterization of Fly Ash as a Sustainable Supplementary Cementitious Material | Civil Engineering Journal 12 (2), 681-697, 2006 | 2006 |
|
|
| 145 | Identification of geothermal potential zone associated with land surface temperature derived from Landsat 8 data using split-window algorithm | Journal of Applied Research and Technology 22 (1), 125-137, 0 |
|
|
|
| 146 | Numerical analysis of thermal comfort behavior in traditional Acehnese houses in Indonesia | Ecological Engineering & Environmental Technology 26 (5), 0 |
|
|
|
| 147 | Numerical analysis of thermal comfort behavior in Acehnese traditional houses in Indonesia | Ecological Engineering & Environmental Technology 26 (5), 0 |
|
|
|
| 148 | Oceanographic studies as the basis for shipyard development at the Fish Landing Port of Sabang |
|
|
||
| 149 | Numerical analysis of thermal comfort behavior in traditional Acehnese houses in Indonesia | Ecological Engineering & Environmental Technology 26 (5), 0 |
|
|
List of Research Works
| No | Title | Focus | Scheme | Year | |
|---|---|---|---|---|---|
| 1 | OPTIMALISASI KINERJA MESIN PENGERING TIPE VENTILASI TURBIN TENAGA ANGIN UNTUK PROSES PENGERINGAN MATERIAL BERKADAR AIR TINGGI | ENERGI BERSIH DAN TERJANGKAU; INDUSTRI, INOVASI, DAN INFRASTRUKTUR; KONSUMSI DAN PRODUKSI YANG BERTANGGUNG JAWAB | PENELITIAN LEKTOR KEPALA | 2022 |
|
| 2 | ANALISIS DISTORSI, KEKERASAN, KETANGGUHAN IMPACT DAN KEKUATAN TARIK AKIBAT VARIASI MEDIA PENDINGIN PADA BAJA ASTM A36 DISEBABKAN OLEH PROSES PENGELASAN MAG | INDUSTRI, INOVASI, DAN INFRASTRUKTUR; KEMITRAAN UNTUK MENCAPAI TUJUAN | PENELITIAN CALON PROFESOR | 2022 |
|
| 3 | KARAKTERISASI MORFOLOGI DAN KRISTALINITAS BETON KOMPOSIT HYBRID FOAM DENGAN FILLER ABU SEKAM PADI, TIO2 SERTA ZNO SEBAGAI MATERIAL PEREDAM PANAS DAN REFLEKTOR RADIASI MATAHARI | SOSIAL HUMANIORA - SENI BUDAYA â PENDIDIKAN | PENELITIAN PROFESOR | 2021 |
|
| 4 | PRODUKSI HASIL INVENSI RANGKA SEPEDA MELALUI TEKNOLOGI METAL CUTTING DAN BENDING PADA PLAT LOGAM | TRANSPORTASI | HILIRISASI INOVASI UNSYIAH | 2021 |
|
| 5 | PENGEMBANGAN DAN PENGUJIAN IN-VIVO MESH GRAFT MODEL TIGA DIMENSI SEBAGAI KANDIDAT MESH HERNIA PADA HEWAN KECIL | KESEHATAN DAN OBAT-OBATAN | PENELITIAN LEKTOR KEPALA | 2020 |
|
| 6 | Analisis Sifat Fisis, Mekanis, Wettability, dan Ketahanan Korosi dari Paduan Al-Cu as Cast dengan Variasi Durasi dan Jarak Tembak Saat Proses Shot Peening | Material Maju | Penelitian Dasar | 2020 |
|
| 7 | STUDI NUMERIK DAN EKSPERIMENTAL PENGARUH PUTARAN SHOULDER PADA SIFAT FISIS - MEKANIS SAMBUNGAN LAS DISSIMILAR METAL PLAT ALUMINUM AA6061 DAN CARBON STEEL ST37 DENGAN PENGELASAN SMAW UNTUK PRODUKSI KAPAL BOAT NELAYAN ACEH | MATERIAL MAJU | PENELITIAN UNGGULAN UNSYIAH | 2020 |
|
| 8 | PENGEMBANGAN RANGKA SEPEDA PROFIL I DARI KOMPOSIT SERAT ABACA DENGAN METODE HAND-LAY-UP DAN VACUUM INFUSION | ENERGI BARU DAN TERBARUKAN, MATERIAL MAJU, TEKNOLOGI INFORMASI DAN KOMUNIKASI, TRANSPORTASI | PENELITIAN UNGGULAN UNSYIAH | 2019 |
|
| 9 | STUDI NON TREATMENT, HEAT TREATMENT (T4 DAN T6) TERHADAP KEKUATAN TARIK, KETAHANAN IMPACT, FATIK (ROTARY BENDING DAN PERAMBATAN RETAK), SERTA KOROSI PADUAN LOGAM ALUMINIUM AL6SI. | SOSIAL HUMANIORA - SENI BUDAYA - PENDIDIKAN | PENELITIAN LEKTOR | 2019 |
|
| 10 | Analisis Sifat Fisis, Mekanis, Wettability, dan Ketahanan Korosi dari Paduan Al-Cu as Cast dengan Variasi Durasi dan Jarak Tembak Saat Proses Shot Peening | Material Maju | Penelitian Dasar | 2019 |
|
| 11 | Uji fisis dan mekanis logam aluminium bekas hasil daur ulang untuk perencanaan dan pembuatan velg sepeda motor dengan metode centrifugal casting | Transportasi | Penelitian Terapan | 2018 |
|
| 12 | Analisis Kerentanan Cacat Hot Tearing Saat Pembekuan Logam dari Paduan Terneri Al-Cu-Si melalui Proses Pengecoran Logam | Material Maju | Penelitian Disertasi Doktor | 2017 |
|
| 13 | Uji fisis dan mekanis logam aluminium bekas hasil daur ulang untuk perencanaan dan pembuatan velg sepeda motor dengan metode centrifugal casting | Transportasi | Penelitian Terapan | 2017 |
|
| 14 | Perencanaan dan Pembuatan Rangka Sepeda Penampang Profil âIâ Beam Menggunakan Material Logam Al-Si dengan Metode centrifugal casting. | Material Maju | Penelitian Produk Terapan | 2016 |
|
| 15 | Perencanaan dan Pembuatan Rangka Sepeda Penampang Profil âIâ Beam Menggunakan Material Logam Al-Si dengan Metode centrifugal casting. | Material Maju | Penelitian Produk Terapan | 2015 |
|
| 16 | Pengembangan dan Peningkatan Nilai Tambah (Added Value) Bijih Besi Kawasan Pesisir Aceh Menjadi Oksida Besi Kinerja Tinggi Berstruktur Nanokristal untuk Penguatan Industri Logam Berbasis Sumber Daya Alam Lokal | Material Maju | MP3EI | 2014 |
|
| 17 | EFEKTIVITAS Lactobacillus plantarum DALAM SUSU FERMENTASI SEBAGAI PRODUK TERAPEUTIK | Pangan | Penelitian Terapan | 2019 |
|
| 18 | EVALUASI KONTRAKSI TERMAL DAN KURVA SOLIDIFIKASI AKIBAT VARIASI TEMPERATUR TUANG PADA PADUAN LOGAM ALMG1SICU | TRANSPORTASI,MATERIAL MAJU | PENELITIAN PROFESOR | 2025 |
|
| 19 | ECO-FRIENDLY BIODEGRADABLE FOAM PACKAGING FROM SHORT CORN HUSK FIBER: DEVELOPMENT AND PHYSICOCHEMICAL CHARACTERIZATION | PANGAN-PERTANIAN,MATERIAL MAJU | PENELITIAN H-INDEKS | 2025 |
|
| 20 | Studi Variasi Suhu Cetakan terhadap Kerentanan Cacat Hot Tearing pada Paduan Cor AlMg1SiCu | Transportasi | Penelitian Fundamental - Reguler | 2025 |
|
| 21 | INOVASI MATERIAL KOMPOSIT HIBRIDA E-GLASSâABACA UNTUK HELM MEDIS: HEAD IMPACT POWER MELALUI SIMULASI FINITE ELEMENT ANALYSIS | KESEHATAN DAN OBAT-OBATAN | PENELITIAN PROFESOR | 2025 |
|
| 22 | PENINGKATAN KUALITAS BAHAN BAKAR CAIR DARI LIMBAH PLASTIK SEBAGAI SUMBER ENERGI ALTERNATIF MELALUI PENERAPAN TEKNOLOGI PIROLISIS KONDENSASI BERTINGKAT DALAM MENDUKUNG KOTA DAN PEMUKIMAN YANG BERKELANJUTAN (KONTAN) | ENERGI BARU DAN TERBARUKAN,MATERIAL MAJU | PENELITIAN PROFESOR BERKARYA | 2024 |
|
| 23 | Pendekatan Integrated untuk Meningkatkan Efisiensi Pembangkit Listrik Water Vortex Gravitasi : Desain, Manufaktur dan Optimasi Eksperimental | Energi | Penelitian Disertasi Doktor | 2024 |
|
| 24 | STUDI SIMULASI DAN EKSPERIMENTAL PADA STRUKTUR RANGKA SEPEDA KOTA DARI PELAT | TRANSPORTASI | PENELITIAN PROFESOR | 2024 |
|
| 25 | Performa Kenyamanan Termal Dan Penghematan Energi Pada Tenda Pengungsi Di Iklim Tropis Lembab | Energi | Penelitian Disertasi Doktor | 2024 |
|
| 26 | Pengaruh Variasi Temperatur Tuang Terhadap Kerentanan Cacat Hot Tearing Paduan Cor Al-Cu-Mg | Material Maju | Penelitian Fundamental - Reguler | 2024 |
|
| 27 | PRODUKSI DECKING TILE LAMINASI DARI LIMBAH PELEPAH SAWIT SERTA EVALUASI KEKUATAN BENDING AKIBAT VARIASI TEKANAN | MATERIAL MAJU | HIBAH HILIRISASI INOVASI USK | 2023 |
|
| 28 | Pengaruh Variasi Temperatur Tuang Terhadap Kerentanan Cacat Hot Tearing Paduan Cor Al-Cu-Mg | Material Maju | Penelitian Fundamental - Reguler | 2023 |
|
| 29 | Analisis Cacat Hot Tear melalui Cetakan Star Shaped serta Mechanical-Physical Properties dari Logam Paduan Cor AA6111 dengan Memvariasikan Temperatur Tuang saat Pengecoran Logam Velg Sepeda Motor | Material Maju | Penelitian Terapan | 2021 |
|
| 30 | Kaji Numerik dan Eksperimental pada Tungku Peleburan Paduan Logam Cu-Zn untuk Produksi Propeller Boat | Kemaritiman | Penelitian Disertasi Doktor | 2021 |
|
List of Community Services
| No | Title | Focus | Scheme | Year | |
|---|---|---|---|---|---|
| 1 | IbM Desa Lampuot daur ulang logam kuningan bekas untuk produksi souvenir rencong melalui teknologi pengecoran logam | Material Maju | Program Kemitraan Masyarakat | 2017 |
|
| 2 | IbM Desa Lampuot untuk Peningkatan Produksi Souvenir Rencong Melalui Teknologi Pengecoran Logam dengan Dapur Peleburan Gas LPG Serta Pemeriksaan Kesehatan Pengrajin | Kesehatan | Program Kemitraan Masyarakat | 2014 |
|
| 3 | PRODUKSI MEJA MINIMALIS BAJA ASTM A36 DENGAN PROSES PENGELASAN SMAW UNTUK PENINGKATAN BADAN USAHA PESANTREN ANAK YATIM DARUL HIKMAH COT YANG KUTA BARO ACEH BESAR | MATERIAL MAJU | PENGABDIAN KEPADA MASYARAKAT BERBASIS PRODUK | 2023 |
|
| 4 | PKM Pengering Ikan Keumamah (Ikan Kayu) Menggunakan Kolektor Surya Pelat Datar Kaca Ganda | Pangan | Program Kemitraan Masyarakat | 2020 |
|
| 5 | PPMUPT Produksi Baling-Baling Boat Nelayan (Propeller) Mengunakan Daur Ulang Limbah Logam Kuningan dengan Metode Pengecoran Logam | Kemaritiman | Program Pemberdayaan Masyarakat Unggulan Perguruan Tinggi | 2020 |
|
List of IPRs
| No | Title | Publication Date | Category | Request Number | |
|---|---|---|---|---|---|
| 1 | Produk Decking Tile Laminasi dari Pelepah Sawit | 21 February 2023 | paten sederhana | S00202300168 |
|
| 2 | Ubin untuk Lantai Bangunan dari Pelepah Sawit | 15 September 2023 | paten sederhana | S00202308956 |
|
| 3 | Elemen Mesin 1 | 20 November 2020 | hak cipta | EC00202140857 |
|
| 4 | SISTEM RODA GIGI PADA SEPEDA AIR | 15 February 2019 | paten | S00201809055 |
|
| 5 | PEMBUATAN GAGANG DAN SARUNG RENCONG DARI MATERIAL RESIN MELALUI TEKNIK PENGECORAN (merupakan pecahan dari permohonan paten Nomor : S22201600965) | NaN undefined NaN | paten | S00201703612 |
|
| 6 | FRAME SEPEDA DAN METODE PENGECORANNYA | 6 July 2018 | paten | P00201709351 |
|
| 7 | ALAT DAN PROSES PRODUKSI BILAH RENCONG MELALUI TEKNIK PENGECORAN LOGAM | 19 August 2016 | paten | S22201600965 |
|
| 8 | Proses Pembuatan Baling-Baling Boat Melalui Teknik Pengecoran Sentifugal | 15 February 2021 | paten sederhana | S00202008291 |
|
| 9 | ALAT DAN METODE UNTUK PRODUKSI BILAH RENCONG MELALUI TEKNIK PENGECORAN LOGAM | 21 Desember 2021 | paten | P00202003992 |
|
| 10 | ALAT DAN METODE UNTUK MENGUKUR TENDENSI HOT CRACKING PADUAN LOGAM | 8 September 2020 | paten | S00202003994 |
|
| 11 | ALAT DAN METODE UNTUK MENGUKUR TENDENSI HOT CRACKING PADUAN LOGAM | 4 June 2020 | paten sederhana | S00202003993 |
|
| 12 | PRODUK BOAT ACEH DARI LOGAM DAN KONSTRUKSI STRUKTUR LAMBUNGNYA | 7 Desember 2020 | paten | P00202009512 |
|
| 13 | ALAT DAN METODE UNTUK MENGUKUR TENDENSI HOT CRACKING PADUAN LOGAM | 30 September 2020 | paten sederhana | S00202007136 |
|
| 14 | Teknik Pengecoran Logam (Hot Tearing) | 1 July 2019 | hak cipta | EC00201944279 |
|
| 15 | ALAT PEMBUATAN VELG SEPEDA MOTOR MELALUI TEKNIK PENGECORAN SENTRIFUGAL SINUSOIDAL | 11 April 2018 | paten sederhana | IDS000003741 |
|
| 16 | METODE PEMBENTUKAN LOGAM (METAL FORMING) UNTUK PEMBUATAN RANGKA SEPEDA DARI PLAT LOGAM | 3 November 2017 | paten sederhana | IDS000004611 |
|
| 17 | METODE PEMBENTUKAN LOGAM (METAL FORMING) UNTUK PEMBUATAN RANGKA SEPEDA DARI PLAT LOGAM | 3 November 2017 | paten | S00201703611 |
|
List of Books
| No | Title | Publisher | Place | Category | ISBN | Year | |
|---|---|---|---|---|---|---|---|
| 1 | EKSPLORASI KONTRAKSI TERMAL ALUMINIUM ALMG1SICU DAN COOLING CURVE | Penerbit Samudra Biru | Indonesia | buku ajar | 9786342541258 | 2026 |
|
| 2 | Mekanika Komputasi : Teori dan Aplikasi dalam Teknik Mesin | USK Press | Banda Aceh | buku referensi | 9786347262936 | 2025 |
|
| 3 | PROBABILITAS CEDERA KEPALA: Pendekatan Rekayasa untuk Desain Teknologi Perlindungan Kepala | Penerbit Samudra Biru | Indonesia | buku ajar | 9786232619371 | 2025 |
|
| 4 | Inovasi Wadah Makanan Biofoam Ramah Lingkungan Berbasis Serat Kulit Jagung | Penerbit Samudra Biru | Indonesia | buku referensi | 9786342540992 | 2025 |
|
| 5 | PENGARUH VARIASI TEMPERATUR CETAKAN TERHADAP COOLING CURVE DAN KONTRAKSI TERMAL ALUMINIUM 7075 | Penerbit Samudra Biru | Indonesia | buku ajar | 9786342541050 | 2025 |
|
| 6 | Kajian propeller untuk boat nelayan dari paduan logam kuningan (cu-zn) | Syiah Kuala University Press | Banda Aceh | buku referensi | 9786232647985 | 2023 |
|
| 7 | Proses Pengerjaan Logam | Penerbit Samudra Biru | Banda Aceh | buku ajar | 9786232613782 | 2022 |
|
| 8 | Metalurgi fisik | Syiah Kuala University Press | Banda Aceh | buku ajar | 9786232644502 | 2021 |
|
| 9 | Elemen Mesin 1 | Syiah Kuala University Press | Banda Aceh | buku ajar | 9786232642027 | 2020 |
|
| 10 | Teknik Pengecoran Logam (Hot Tearing) | Penerbit Samudra Biru | Banda Aceh | buku ajar | 9786237080602 | 2019 |
|