Dr MUHAMMAD RIZAL, S.T, M.Sc.
S2 - TEKNIK INDUSTRI
SINTA Score Overall
2.418
SINTA Score 3Year
572
Affiliation Score Overall
3.206.390.016
Affiliation Score 3Year
1.055.219.968
Authors Publication
Database Author
| Scopus | WOS | Garuda | GS | |
|---|---|---|---|---|
| Article | 76 | 36 | 4 | 56 |
| Citation | 923 | 469 | 0 | 1.096 |
| Cited Document | 58 | 27 | 0 | 46 |
| H-Index | 14 | 11 | 0 | 14 |
| i10-Index | 21 | 0 | 0 | 22 |
| G-Index | 1 | 0 | 0 | 1 |
List of Articles
| No | Title | Publication | Date | Type | URL | |
|---|---|---|---|---|---|---|
| 1 | Design and experimental study of a piezoelectric energy harvester embedded in a rotating spindle excited by magnetic force | Sensors and Actuators A Physical | 16 June 2022 | Journal |
|
|
| 2 | Design and Development of a Tri-Axial Turning Dynamometer Utilizing Cross-Beam Type Force Transducer for Fine-Turning Cutting Force Measurement | Sensors | 1 November 2022 | Journal |
|
|
| 3 | PHYSICAL AND THERMAL CHARACTERISTICS OF COCO PEAT FIBRE REINFORCED POLYURETHANE COMPOSITE FOR INSULATION BOX IN MARINE APPLICATION | Journal of Engineering Science and Technology | 1 Desember 2022 | Journal |
|
|
| 4 | Fatigue life assessments of the aisi 1513 carbon steel subjected to road surface strains | Defect and Diffusion Forum | 1 January 2020 | Journal |
|
|
| 5 | Fatigue life assessments of the AISI 1513 carbon steel of a vehicle lower arm subjected to clockwise and counter-clockwise road strains | Defect and Diffusion Forum | 1 January 2020 | Journal |
|
|
| 6 | Fatigue life assessments of the sae 5160 carbon steel subjected to uphill and downhill roads strains | Defect and Diffusion Forum | 1 January 2020 | Journal |
|
|
| 7 | An analytical, numerical and experimental study of an octagonal ring force transducer for a 2-axis force measurement | Iop Conference Series Materials Science and Engineering | 3 July 2019 | Conference Proceedin |
|
|
| 8 | Free vibration characteristics of jute fibre reinforced composite for the determination of material properties: Numerical and experimental studies | Aip Conference Proceedings | 10 Desember 2019 | Conference Proceedin |
|
|
| 9 | Design and construction of a strain gauge-based dynamometer for a 3-axis cutting force measurement in turning process | Journal of Mechanical Engineering and Sciences | 1 Desember 2018 | Journal |
|
|
| 10 | Comparative Study of Dry and MQL Condition on Hole Quality and Tool Vibration in Drilling Titanium Ti-6Al-7Nb Alloy | Lecture Notes in Mechanical Engineering | 1 January 2023 | Book Series |
|
|
| 11 | A Comparative Study of the Static and Dynamic Characteristics of Jute and Glass Fiber-Reinforced Polyester Composites | Experimental Techniques | 1 April 2024 | Journal |
|
|
| 12 | Fiber bundled probe for highly sensitive sensor for zinc ion detection using a concave mirror | Journal of Optoelectronics and Advanced Materials | 1 March 2023 | Journal |
|
|
| 13 | Development and testing of a stationary dynamometer using cross-beam-type force-sensing elements for three-axis cutting force measurement in milling operations | Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture | 1 May 2024 | Journal |
|
|
| 14 | DESIGN AND OPTIMIZATION OF A CROSS-BEAM FORCE TRANSDUCER FOR A STATIONARY DYNAMOMETER FOR MEASURING MILLING CUTTING FORCE | Journal of Machine Engineering | 1 January 2023 | Journal |
|
|
| 15 | Effect of Hybridization of Ramie Fibers on the Vibrational and Damping Responses of Ramie/Glass/Epoxy Resin Composite Laminates | Key Engineering Materials | 1 January 2023 | Book Series |
|
|
| 16 | Semiconductor strain gauges as potential replacement to metal foil for cutting force measurement in machining process | Jurnal Tribologi | 1 March 2022 | Journal |
|
|
| 17 | Experimental Study of MQL Performance on the Titanium Material Drilling Process | Materials Science Forum | 1 January 2022 | Book Series |
|
|
| 18 | Enhancing Clustering Algorithm with Initial Centroids in Tool Wear Region Recognition | International Journal of Precision Engineering and Manufacturing | 1 May 2021 | Journal |
|
|
| 19 | Thermal properties of high density polyethylene/poly(Vinyl alcohol) fiber composites prepared using laboratory mixing extruder | Solid State Phenomena | 1 January 2021 | Book Series |
|
|
| 20 | The study on the properties of TiC x N 1âx coatings processed by cathodic arc physical vapour deposition | Tribology Materials Surfaces and Interfaces | 2 January 2019 | Journal |
|
|
| 21 | Surface characterisation of TiC x N 1 â x coatings processed by cathodic arc physical vapour deposition: XPS and XRD analysis | Surface and Interface Analysis | 1 June 2019 | Journal |
|
|
| 22 | Cutting tool wear progression index via signal element variance | Journal of Mechanical Engineering and Sciences | 1 March 2019 | Journal |
|
|
| 23 | Investigation of energy consumption during milling operation | Aip Conference Proceedings | 30 July 2019 | Conference Proceedin |
|
|
| 24 | An embedded multi-sensor system on the rotating dynamometer for real-time condition monitoring in milling | International Journal of Advanced Manufacturing Technology | 1 March 2018 | Journal |
|
|
| 25 | Ceramic tools insert assesment based on vickers indentation methodology | Iop Conference Series Materials Science and Engineering | 11 May 2018 | Conference Proceedin |
|
|
| 26 | Calcium carbonate reinforced polypropylene nanocomposites: Effect of nano-filler loadings on the melt rheological properties | Key Engineering Materials | 1 January 2018 | Book Series |
|
|
| 27 | High density polyethylene/date palm fiber composites: Effect of fiber loadings on the dynamic mechanical thermal properties | Key Engineering Materials | 1 January 2018 | Book Series |
|
|
| 28 | Enhancing mechanical properties of polyvinyl alcohol fiber reinforced high density polyethylene composites | Key Engineering Materials | 1 January 2018 | Book Series |
|
|
| 29 | Cutting tool wear prediction using novel pie-zofilm-based vibratory signal analysis (Z-rot) | 25th International Congress on Sound and Vibration 2018 Icsv 2018 Hiroshima Calling | 1 January 2018 | Conference Proceedin |
|
|
| 30 | Cutting tool wear classification and detection using multi-sensor signals and Mahalanobis-Taguchi System | Wear | 1 January 2017 | Journal |
|
|
| 31 | A review of the milling process to fabricate a dimple structure | Journal of Mechanical Engineering | 1 January 2017 | Journal |
|
|
| 32 | TRIZ approach for designing a new assisted tooling for dimple structure fabrication | Journal of Mechanical Engineering | 1 January 2017 | Journal |
|
|
| 33 | The correlation between tool wear and vibration signals from piezoelectric in end milling of AISI P20+NI | Journal of Mechanical Engineering | 1 January 2017 | Journal |
|
|
| 34 | Tool wear condition monitoring using slip ring and accelerometer system in milling AISI P20 tool steel | Journal of Mechanical Engineering | 1 January 2017 | Journal |
|
|
| 35 | A triaxial cutting force measurement utilizing an embedded transducer on a spindle rotating tool | Proceedings of the International Conference on Sensing Technology Icst | 21 March 2016 | Conference Proceedin |
|
|
| 36 | Development and testing of an integrated rotating dynamometer on tool holder for milling process | Mechanical Systems and Signal Processing | 1 January 2015 | Journal |
|
|
| 37 | Comparison of oil press for jatropha oil - A review | Research in Agricultural Engineering | 1 January 2015 | Journal |
|
|
| 38 | Parameters affecting the extraction process of Jatropha curcas oil using a single screw extruder | Journal of Engineering and Technological Sciences | 10 September 2015 | Journal |
|
|
| 39 | Performance of uncoated and coated carbide tools in turning FCD700 using fem simulation | International Journal of Simulation Modelling | 1 January 2015 | Journal |
|
|
| 40 | Flank wear and I-kaz 3D correlation in ball end milling process of Inconel 718 | Journal of Mechanical Engineering and Sciences | 1 Desember 2015 | Journal |
|
|
| 41 | I-kazâ¢-based analysis of cutting force signals for tool condition monitoring in turning process | Applied Mechanics and Materials | 7 January 2014 | Book Series |
|
|
| 42 | A review of sensor system and application in milling process for tool condition monitoring | Research Journal of Applied Sciences Engineering and Technology | 1 January 2014 | Journal |
|
|
| 43 | A comparative study of I-kaz based signal analysis techniques: Application to detect tool wear during turning process | Jurnal Teknologi Sciences and Engineering | 10 March 2014 | Journal |
|
|
| 44 | A wireless system and embedded sensors on spindle rotating tool for condition monitoring | Advanced Science Letters | 1 January 2014 | Journal |
|
|
| 45 | Performance of green machining: A comparative study of turning ductile cast iron FCD700 | Journal of Cleaner Production | 15 Desember 2014 | Journal |
|
|
| 46 | Online tool wear prediction system in the turning process using an adaptive neuro-fuzzy inference system | Applied Soft Computing Journal | 1 January 2013 | Journal |
|
|
| 47 | The application of I-kazâ¢-based method for tool wear monitoring using cutting force signal | Procedia Engineering | 1 January 2013 | Conference Proceedin |
|
|
| 48 | Development of an adequate online tool wear monitoring system in turning process using low cost sensor | Advanced Science Letters | 1 June 2012 | Journal |
|
|
| 49 | Determination of sensor location for cutting tool deflection using finite element method simulation | Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Scie | 1 September 2012 | Journal |
|
|
| 50 | Relationship between measurement of cutting force and sensor location in turning process | Jurnal Teknologi Sciences and Engineering | 1 Desember 2012 | Journal |
|
|
| 51 | Monitoring online cutting tool wear using low-cost technique and user-friendly GUI | Wear | 29 July 2011 | Journal |
|
|
| 52 | Online tool wear monitoring using portable digital assistant (PDA) | International Journal of Physical Sciences | 18 August 2011 | Journal |
|
|
| 53 | Detection of cutting tool wear using statistical analysis and regression model | Aip Conference Proceedings | 13 Desember 2010 | Conference Proceedin |
|
|
| 54 | Online cutting tool wear monitoring using I-kaz method and new regression model | Advanced Materials Research | 1 Desember 2010 | Book Series |
|
|
| 55 | Statistical analysis for detection cutting tool wear based on regression model | Proceedings of the International Multiconference of Engineers and Computer Scientists 2010 Imecs 201 | 1 Desember 2010 | Conference Proceedin |
|
|
| 56 | New regression model and I-kaz method for online cutting tool wear monitoring | World Academy of Science Engineering and Technology | 1 Desember 2009 | Journal |
|
|
| 57 | Influence Of Processing Techniques On The Performance Of OutworDenim Fabric-reinforced Polymer Composites | Journal of Applied Science and Engineering | 15 July 2026 | Journal |
|
|
| 58 | Development of mini 4-axis dynamometer using semiconductor strain sensors for cutting force and torque measurement in micro/meso-scale machining | Measurement Journal of the International Measurement Confederation | 1 February 2026 | Journal |
|
|
| 59 | Bubble-Bursting Atomization for Minimum Quantity Lubrication Using the TRIZ Method and Computational Fluid Dynamics Simulations | Journal of Materials Engineering and Performance | 1 January 2025 | Journal |
|
|
| 60 | Design and experimental study of piezoelectric energy harvester integrated in rotating vehicle tire using end-cap system | Results in Engineering | 1 March 2025 | Journal |
|
|
| 61 | Experimental study on the feasibility of graphite nanoparticles with fruit tree-based vegetable oils for nanofluid MQL in milling AISI 304 stainless steel | Jurnal Tribologi | 1 March 2025 | Journal |
|
|
| 62 | Impact Analysis of Composite Laminate Structures in Traditional Jaloe Kayoh Boat Hulls | Polish Maritime Research | 1 September 2025 | Journal |
|
|
| 63 | Comparative study of tree-based vegetable and mineral oils as cutting fluids in milling AA7075 under MQL condition | Jurnal Tribologi | 1 June 2025 | Journal |
|
|
| 64 | Supply Chain Resilience in the Context of Global Production and Logistics | Al Khwarizmi Engineering Journal | 1 September 2025 | Journal |
|
|
| 65 | MACHINING PERFORMANCE WITH RESPECT TO CUTTING FORCES, VIBRATIONS AND SURFACE QUALITY IN DRILLING OF HYBRID ABACA AND GLASS FIBERS REINFORCED POLYMER COMPOSITE | Iium Engineering Journal | 9 September 2025 | Journal |
|
|
| 66 | Influence of graphite nanoparticle concentration and vegetable oil type in minimum quantity lubrication on the milling performance of SKD11 tool steel | Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineer | 1 January 2025 | Journal |
|
|
| 67 | Machining analysis of S45C carbon steel using finite element method | Jurnal Tribologi | 1 March 2024 | Journal |
|
|
| 68 | Experimental Investigation of Non-destructive Vibrational Evaluation Techniques for Determining Elastic Properties of Jute and Glass Fiber Reinforced Composites | Lecture Notes in Mechanical Engineering | 1 January 2024 | Book Series |
|
|
| 69 | A Fatigue Life Assessment of Automotive Coil Spring and Lower Arm Due to Road Surface Contours | Lecture Notes in Mechanical Engineering | 1 January 2024 | Book Series |
|
|
| 70 | Experimental Study of Magnetic Force Direction Variation on the Efficiency Effects of the Piezoelectric-Based Energy Harvesting Mechanism | Lecture Notes in Mechanical Engineering | 1 January 2024 | Book Series |
|
|
| 71 | A rotating piezoelectric energy harvester in a spindle shaft under magnetic repulsive-attractive forces | International Journal of Ambient Energy | 1 January 2024 | Journal |
|
|
| 72 | Experimental investigation on performance of bubble-bursting atomization methods for minimum quantity lubrication in face milling tool steel | Results in Engineering | 1 Desember 2024 | Journal |
|
|
| 73 | The effect of differences in fiber sizes on the cutting force during the drilling process of natural fiber-reinforced polymer composites | Results in Engineering | 1 Desember 2024 | Journal |
|
|
| 74 | Inorganic oxides characteristics synthesized from natural limestone found in Aceh Province | Aip Conference Proceedings | 18 July 2024 | Conference Proceedin |
|
|
| 75 | Effects of wild mango (Spondias pinnata) on quality of salted duck eggs | Aip Conference Proceedings | 18 July 2024 | Conference Proceedin |
|
|
| 76 | The synthesis of biodiesel from palm oil and waste cooking oil via electrolysis by various electrodes | Case Studies in Chemical and Environmental Engineering | 1 Desember 2023 | Journal |
|
|
| 77 | (Development of Cutting Force Database in Machining S45C For Monitoring the Status of Cutting Tool Wear) | Jurnal Kejuruteraan | 1 September 2023 | Journal |
|
|
| 78 | Use of hydrodynamic cavitation for esterification of free fatty acids in waste cooking oil | Iop Conference Series Materials Science and Engineering | 17 June 2020 | Conference Proceedin |
|
|
| No | Title | Publication | Date | Type | url | |
|---|---|---|---|---|---|---|
| 1 | Design and experimental study of a piezoelectric energy harvester embedded in a rotating spindle excited by magnetic force | SENSORS AND ACTUATORS A-PHYSICAL | JUN 16 2022 | Journal |
|
|
| 2 | Free Vibration Characteristics of Jute Fibre Reinforced Composite for the Determination of Material Properties: Numerical and Experimental Studies | INNOVATIVE SCIENCE AND TECHNOLOGY IN MECHANICAL ENGINEERING FOR INDUSTRY 4.0 | 2019 | Book in series |
|
|
| 3 | A Comparative Study of the Static and Dynamic Characteristics of Jute and Glass Fiber-Reinforced Polyester Composites | EXPERIMENTAL TECHNIQUES | JUN 1 2023 | Journal |
|
|
| 4 | The Role of Knowledge Management Capability, Financial Literacy, and Problem-Solving Skills on Organizational Performance for SMEs | FRONTIERS IN PSYCHOLOGY | OCT 6 2022 | Journal |
|
|
| 5 | Design and Development of a Tri-Axial Turning Dynamometer Utilizing Cross-Beam Type Force Transducer for Fine-Turning Cutting Force Measurement | SENSORS | NOV 2022 | Journal |
|
|
| 6 | Semiconductor strain gauges as potential replacement to metal foil for cutting force measurement in machining process | JURNAL TRIBOLOGI | JUN 2022 | Journal |
|
|
| 7 | PHYSICOCHEMICAL AND SENSORY PROFILES OF VANILLA ICE MILK IN INDUSTRIAL AGEING TANKS USING TWO DIFFERENT AGITATOR SPEEDS | SCIENTIFIC STUDY AND RESEARCH-CHEMISTRY AND CHEMICAL ENGINEERING BIOTECHNOLOGY FOOD INDUSTRY | 2022 | Journal |
|
|
| 8 | Enhancing Clustering Algorithm with Initial Centroids in Tool Wear Region Recognition | INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING | MAY 2021 | Journal |
|
|
| 9 | Rice Controller Using Half Bridge Load Cell and NodeMCU ESP8266 In Rice Dispenser | 2019 5TH INTERNATIONAL CONFERENCE ON COMPUTING, ENGINEERING, AND DESIGN (ICCED) | 2019 | Book |
|
|
| 10 | The study on the properties of TiC<i><sub>x</sub></i>N<sub>1-<i>x</i></sub> coatings processed by cathodic arc physical vapour deposition | TRIBOLOGY-MATERIALS SURFACES & INTERFACES | 2019 | Journal |
|
|
| 11 | Surface characterisation of TiC<sub><i>x</i></sub>N<sub>1-<i>x</i></sub> coatings processed by cathodic arc physical vapour deposition: XPS and XRD analysis | SURFACE AND INTERFACE ANALYSIS | JUN 2019 | Journal |
|
|
| 12 | Cutting tool wear progression index via signal element variance | JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES | MAR 2019 | Journal |
|
|
| 13 | Design and construction of a strain gauge-based dynamometer for a 3-axis cutting force measurement in turning process | JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES | DEC 2018 | Journal |
|
|
| 14 | An embedded multi-sensor system on the rotating dynamometer for real-time condition monitoring in milling | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | MAR 2018 | Journal |
|
|
| 15 | Cutting tool wear classification and detection using multi-sensor signals and Mahalanobis-Taguchi System | WEAR | APR 15 2017 | Journal |
|
|
| 16 | MONITORING THE FLANK WEAR USING PIEZOELECTRIC OF ROTATING TOOL OF MAIN CUTTING FORCE IN END MILLING | JURNAL TEKNOLOGI | 2016 | Journal |
|
|
| 17 | Relationship between Vibration Signals and Tool Wear in Milling Process | PROCEEDINGS OF INTERNATIONAL CONFERENCE ON ADVANCED PROCESSES AND SYSTEMS IN MANUFACTURING (APSIM 2016) | 2016 | Book |
|
|
| 18 | Flank wear and vibration analysis during end milling of AISI P20+Ni | PROCEEDINGS OF INTERNATIONAL CONFERENCE ON ADVANCED PROCESSES AND SYSTEMS IN MANUFACTURING (APSIM 2016) | 2016 | Book |
|
|
| 19 | Parameters Affecting the Extraction Process of <i>Jatropha curcas</i> Oil Using a Single Screw Extruder | JOURNAL OF ENGINEERING AND TECHNOLOGICAL SCIENCES | 2015 | Journal |
|
|
| 20 | A triaxial cutting force measurement utilizing an embedded transducer on a spindle rotating tool | 2015 9TH INTERNATIONAL CONFERENCE ON SENSING TECHNOLOGY (ICST) | 2015 | Book in series |
|
|
| 21 | PERFORMANCE OF UNCOATED AND COATED CARBIDE TOOLS IN TURNING FCD700 USING FEM SIMULATION | INTERNATIONAL JOURNAL OF SIMULATION MODELLING | SEP 2015 | Journal |
|
|
| 22 | Development and testing of an integrated rotating dynamometer on tool holder for milling process | MECHANICAL SYSTEMS AND SIGNAL PROCESSING | FEB 2015 | Journal |
|
|
| 23 | TRIZ APPROACH IN DESIGNING AN INTEGRATED ROTATING DYNAMOMETER FOR MILLING PROCESS | M2D2015: PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN | 2015 | Book |
|
|
| 24 | A Wireless System and Embedded Sensors on Spindle Rotating Tool for Condition Monitoring | ADVANCED SCIENCE LETTERS | OCT-DEC 2014 | Journal |
|
|
| 25 | I-kazâ¢-Based Analysis of Cutting Force Signals for Tool Condition Monitoring in Turning Process | NOISE, VIBRATION AND COMFORT | 2014 | Book in series |
|
|
| 26 | A Comparative Study of I-kaz Based Signal Analysis Techniques: Application to Detect Tool Wear during Turning Process | JURNAL TEKNOLOGI | 2014 | Journal |
|
|
| 27 | Performance of green machining: a comparative study of turning ductile cast iron FCD700 | JOURNAL OF CLEANER PRODUCTION | DEC 15 2014 | Journal |
|
|
| 28 | The Application of I-kazâ¢-Based Method for Tool Wear Monitoring using Cutting Force Signal | INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013 | 2013 | Books in series |
|
|
| 29 | Online tool wear prediction system in the turning process using an adaptive neuro-fuzzy inference system | APPLIED SOFT COMPUTING | APR 2013 | Journal |
|
|
| 30 | Determination of sensor location for cutting tool deflection using finite element method simulation | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE | 2012 | Journal |
|
|
| 31 | Relationship Between Measurement of Cutting Force and Sensor Location in Turning Process | JURNAL TEKNOLOGI | NOV 2012 | Journal |
|
|
| 32 | Monitoring online cutting tool wear using low-cost technique and user-friendly GUI | WEAR | JUL 29 2011 | Journal |
|
|
| 33 | Online Cutting Tool Wear Monitoring using I-kaz Method and New Regression Model | ADVANCES IN ABRASIVE TECHNOLOGY XIII | 2010 | Book in series |
|
|
| 34 | Detection of Cutting Tool Wear using Statistical Analysis and Regression Model | IAENG TRANSACTIONS ON ENGINEERING TECHNOLOGIES, VOL 5 | 2010 | Books in series |
|
|
| 35 | Statistical Analysis for Detection Cutting Tool Wear Based on Regression Model | INTERNATIONAL MULTICONFERENCE OF ENGINEERS AND COMPUTER SCIENTISTS (IMECS 2010), VOLS I-III | 2010 | Book in series |
|
|
| 36 | Experimental investigation on performance of bubble-bursting atomization methods for minimum quantity lubrication in face milling tool steel | RESULTS IN ENGINEERING | DEC 2024 | Journal |
|
|
| 37 | Development and testing of a stationary dynamometer using cross-beam-type force-sensing elements for three-axis cutting force measurement in milling operations | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE | JUN 23 2023 | Journal |
|
|
| No | Title | Publisher | Source | Date | url | |
|---|---|---|---|---|---|---|
| 1 | Penggunaan Accelerometer dan Strain Gauge Sebagai Sensor Untuk Mendeteksi Kerusakan Pahat Potong | Jurnal Teknik Mesin Unsyiah | Jurnal Teknik Mesin Unsyiah | 11 July 2019 |
|
|
| 2 | Pengembangan Sistem Pengukuran Gaya Tumbukan pada Jurus Pukulan Datar Pencak Silat Menggunakan Sistem Strain Gauge | Jurnal Teknik Mesin Unsyiah | Jurnal Teknik Mesin Unsyiah | 7 October 2020 |
|
|
| 3 | Parameters Affecting the Extraction Process of Jatropha curcas Oil Using a Single Screw Extruder | Institute for Research and Community Services, Institut Teknologi Bandung | Journal of Engineering and Technological Sciences | 31 July 2015 |
|
|
| 4 | Identification Noise monitoring for students in SMAN 1 Tapaktuan | ITScience (Information Technology and Science) | Brilliance: Research of Artificial Intelligence | 3 Desember 2021 |
|
|
| 5 | DISSEMINATION OF APPLICATION OF COW FEED PRODUCTION MACHINERY EQUIPMENT IN KAYEE LEE VILLAGE, INGIN JAYA DISTRICT, ACEH BESAR | LPPM Univ. Ibn Khaldun Bogor | Abdi Dosen : Jurnal Pengabdian Pada Masyarakat | 6 June 2023 |
|
|
| 6 | Application of Tofu Waste Treatment Installation to Produce Land Remediation Culture in Punge Blang Cut Banda Aceh | Institut Teknologi dan Bisnis Asia Malang | Jurnal Pengabdian Masyarakat | 31 October 2023 |
|
|
| No | Title | Publication | Year | url | |
|---|---|---|---|---|---|
| 1 | Design and optimization of a cross-beam force transducer for a stationary dynamometer for measuring milling cutting force | Journal of Machine Engineering 23, 2023 | 2023 |
|
|
| 2 | Development of a Portable Universal Testing Machine for Investigating the Mechanical Properties of Medium-Strength Materials | Aceh International Journal of Science and Technology 12 (1), 25-32, 2023 | 2023 |
|
|
| 3 | A Comparative Study of the Static and Dynamic Characteristics of Jute and Glass Fiber-Reinforced Polyester Composites | Experimental Techniques, 1-9, 2023 | 2023 |
|
|
| 4 | Pellet moulding machine design and simulation analysis of the effect of angle variation in the mold hole on pellet alloy pressure | Jurnal Polimesin 21 (3), 266-271, 2023 | 2023 |
|
|
| 5 | Development and testing of a stationary dynamometer using cross-beam-type force-sensing elements for three-axis cutting force measurement in milling operations | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …, 2023 | 2023 |
|
|
| 6 | Effect of hybridization of Ramie fibers on the vibrational and damping responses of Ramie/glass/epoxy resin composite laminates | Key Engineering Materials 951, 65-71, 2023 | 2023 |
|
|
| 7 | Validating a low-cost seismometer using a shaking table | E3S Web of Conferences 340, 02009, 2022 | 2022 |
|
|
| 8 | Catch Fisheries Production Supply Chain For Fish Consumption In West Aceh The Hinterland Communities | THE 3RD INTERNATIONAL CONFERENCE ON PUBLIC HEALTH (ICPH) 2021, 2022 | 2022 |
|
|
| 9 | Fiber laser cutting of AISI-304 stainless steel: an experimental study of the influence of process parameters on kerf width and cutting edge quality | Jurnal Teknik Mesin 10 (2), 52-56, 2022 | 2022 |
|
|
| 10 | Manajemen Sumber Daya Manusia Dalam Meningkatkan Mutu Pendidikan di SMA Negeri 1 Mempawah Hilir | Al-Astar 1 (2), 55-74, 2022 | 2022 |
|
|
| 11 | Implementasi Surat Edaran Mentri Pendidikan dan Kebudayaan No. 1 Tahun 2021 (Peniadaan Ujian Nasional) di Madrasah Aliyah Al-Mukhlishin Antibar Kecamatan Mempawah Timur … | Al-Astar 1 (1), 43-59, 2022 | 2022 |
|
|
| 12 | Pengembangan Seismometer Berbasis Piezoresistive untuk Sistem Pemantauan Getaran Frekuensi Rendah | Acta Geoscience, Energy, and Mining 1 (4), 35-39, 2022 | 2022 |
|
|
| 13 | Design and development of a tri-axial turning dynamometer utilizing cross-beam type force transducer for fine-turning cutting force measurement | Sensors 22 (22), 8751, 2022 | 2022 |
|
|
| 14 | Pengukuran Teknik Dasar dan Aplikasi | Syiah Kuala University Press, 2020 | 2020 |
|
|
| 15 | Study of suspended handle materials for reducing hand-arm vibration in backpack grass trimmer | IOP Conference Series: Materials Science and Engineering 931 (1), 012006, 2020 | 2020 |
|
|
| 16 | SUPERVISI KEPALA MADRASAH DALAM MEMBINA PROFESIONALISME GURU (STUDI IMPLEMENTATIF DI MADRASAH AIYAH MIFTAHUL ULUM SENGKUBANG) | JURNAL ILMIAH EDUKATIF 6 (2), 147-158, 2020 | 2020 |
|
|
| 17 | Cutting tool wear progression index via signal element variance | Journal of mechanical engineering and sciences 13 (1), 4596-4612, 2019 | 2019 |
|
|
| 18 | An embedded multi-sensor system on the rotating dynamometer for real-time condition monitoring in milling | The International Journal of Advanced Manufacturing Technology 95 (1), 811-823, 2018 | 2018 |
|
|
| 19 | Cutting tool wear classification and detection using multi-sensor signals and Mahalanobis-Taguchi System | Wear 376, 1759-1765, 2017 | 2017 |
|
|
| 20 | TRIZ approach for designing a new assisted tooling for dimple structure fabrication | Journal of Mechanical Engineering (JMechE), 79-90, 2017 | 2017 |
|
|
| 21 | A review of the milling process to fabricate a dimple structure | Journal of Mechanical Engineering (JMechE), 175-192, 2017 | 2017 |
|
|
| 22 | The correlation between tool wear and vibration signals from piezoelectric in end milling of AISI P20+ NI | Journal of Mechanical Engineering (JMechE), 49-62, 2017 | 2017 |
|
|
| 23 | The Role of Academic as Business Incubator: Innovativeness Capability for MSMEs Based On Market and Entrepreuneurial Orientation | International Conference on Science, Technology and Modern Society 1 (1), 85-92, 2017 | 2017 |
|
|
| 24 | RANCANGAN PERBAIKAN MANAJEMEN PERSEDIAAN DENGAN SISTEM ECONOMIC ORDER QUANTITY (EOQ) STUDI KASUS UNIT LABORATORIUM PT. PETROKIMIA GRESIK | Universitas Airlangga, 2017 | 2017 |
|
|
| 25 | Konsep Pasar Dalam Islam | iain, 2017 | 2017 |
|
|
| 26 | Tool wear condition monitoring using slip ring and accelerometer system in milling AISI P20 tool steel | Journal of Mechanical Engineering (JMechE), 63-72, 2017 | 2017 |
|
|
| 27 | The Application of Coopeartif Learning Model type STAD Assisted with Broad Transparent Diagrams, Alva board and Circle models to Improve Student Learning Outcomes on Broadly … | Jurnal Riset Pendidikan MIPA 1 (1), 17-30, 2017 | 2017 |
|
|
| 28 | PENINGKATAN KEMAMPUAN BERFIKIR SAINS SISWA KELAS VIII MELALUI PEMBELAJARAN KOOPERATIF TIPE STAD PADA KONSEP PERTUMBUHAN DAN PERKEMBANGAN DI SMP NEGERI 1 PALLANGGA KAB. GOWA | BIMAFIKA: Jurnal MIPA, Kependidikan dan Terapan 3 (1), 2016 | 2016 |
|
|
| 29 | RANCANG BANGUN SISTEM INFORMASI AKADEMIK PADA SMA ISLAM SULTAN AGUNG 1 SEMARANG | Fakultas Teknologi Industri UNISSULA, 2016 | 2016 |
|
|
| 30 | Monitoring the flank wear using piezoelectric of rotating tool of main cutting force in end milling | Jurnal Teknologi (Sciences & Engineering) 78 (6-10), 2016 | 2016 |
|
|
| 31 | Development and testing of an integrated rotating dynamometer on tool holder for milling process | Mechanical systems and signal processing 52, 559-576, 2015 | 2015 |
|
|
| 32 | Performance of uncoated and coated carbide tools in turning FCD700 using FEM simulation | Int. J. Simul. Model 14, 416-425, 2015 | 2015 |
|
|
| 33 | A triaxial cutting force measurement utilizing an embedded transducer on a spindle rotating tool | 2015 9th International Conference on Sensing Technology (ICST), 289-294, 2015 | 2015 |
|
|
| 34 | Flank wear and I-kaz 3D correlation in ball end milling process of Inconel 718 | Journal of Mechanical Engineering and Sciences 9, 1595-1603, 2015 | 2015 |
|
|
| 35 | Parameters Affecting the Extraction Process of Jatropha curcas Oil Using a Single Screw Extruder | Journal of Engineering and Technological Sciences 47 (3), 266-278, 2015 | 2015 |
|
|
| 36 | Comparison of oil press for jatropha oil-a review | Research in Agricultural Engineering 61 (1), 1-13, 2015 | 2015 |
|
|
| 37 | UPAYA MENINGKATKAN HASIL BELAJAR SISWA DENGAN PENERAPAN PENDEKATAN PROBLEM SOLVING PADA PEMBELAJARAN PENDIDIKAN AGAMA ISLAM KELAS XII. IPA. 2 SMA NEGERI 1 LUBUK BASUNG | Jurnal Pelangi 7 (2), 2015 | 2015 |
|
|
| 38 | Center of mass-based admittance control for multi-legged robot walking on the bottom of ocean | Jurnal Teknologi (Sciences & Engineering) 74 (9), 2015 | 2015 |
|
|
| 39 | Performance of green machining: a comparative study of turning ductile cast iron FCD700 | Journal of cleaner production 85, 289-292, 2014 | 2014 |
|
|
| 40 | A review of sensor system and application in milling process for tool condition monitoring | Research Journal of Applied Sciences, Engineering and Technology 7 (10Â …, 2014 | 2014 |
|
|
| 41 | Design and analysis of single screw extruder for jatropha seeds using finite element method | Research Journal of Applied Sciences, Engineering and Technology 7 (10Â …, 2014 | 2014 |
|
|
| 42 | A wireless system and embedded sensors on spindle rotating tool for condition monitoring | Advanced Science Letters 20 (10-11), 1829-1832, 2014 | 2014 |
|
|
| 43 | I-KazTM-Based Analysis of Cutting Force Signals for Tool Condition Monitoring in Turning Process | Applied Mechanics and Materials 471, 203-207, 2014 | 2014 |
|
|
| 44 | A comparative study of I-kaz based signal analysis techniques: application to detect tool wear during turning process | Jurnal Teknologi (Sciences & Engineering) 66 (3), 2014 | 2014 |
|
|
| 45 | Quality of service routing for wireless sensor network | Monash University, 2014 | 2014 |
|
|
| 46 | Online tool wear prediction system in the turning process using an adaptive neuro-fuzzy inference system | Applied Soft Computing 13 (4), 1960-1968, 2013 | 2013 |
|
|
| 47 | The application of I-kazTM-based method for tool wear monitoring using cutting force signal | Procedia Engineering 68, 461-468, 2013 | 2013 |
|
|
| 48 | Pengaruh Gaji Dan Tunjangan Terhadap Kinerja Guru Sdit AL Ikhlas 86 | 2013 |
|
|
|
| 49 | MODEL DINAMIK INTERAKSI ANTARA VEKTOR TERINFEKSI LEPTOSPIROSIS DAN POPULASI MANUSIA | UNIVERSITAS ISLAM NEGERI SULTAN SYARIF KASIM RIAU, 2013 | 2013 |
|
|
| 50 | Determination of sensor location for cutting tool deflection using finite element method simulation | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …, 2012 | 2012 |
|
|
| 51 | Development of an adequate online tool wear monitoring system in turning process using low cost sensor | Advanced Science Letters 13 (1), 702-706, 2012 | 2012 |
|
|
| 52 | Relationship Between Measurement of Cutting Force and Sensor Location in Turning Process | Jurnal Teknologi (Sciences & Engineering) 59 (2), 2012 | 2012 |
|
|
| 53 | Monitoring online cutting tool wear using low-cost technique and user-friendly GUI | Wear 271 (9-10), 2619-2624, 2011 | 2011 |
|
|
| 54 | Online tool wear monitoring using portable digital assistant (PDA) | International Journal of the Pyhsical Sciences 6 (16), 4064-4069, 2011 | 2011 |
|
|
| 55 | Statistical analysis for detection cutting tool wear based on regression model | Proceedings of the International MultiConference of Engineers and Computer …, 2010 | 2010 |
|
|
| 56 | Online cutting tool wear monitoring using I-kaz method and new regression model | Advanced Materials Research 126, 738-743, 2010 | 2010 |
|
|
| 57 | Detection of Cutting Tool Wear using Statistical Analysis and Regression Model | AIP Conference Proceedings 1285 (1), 249-259, 2010 | 2010 |
|
|
| 58 | New regression model and I-Kaz method for online cutting tool wear monitoring | World Academy of Science, Engineering and Technology 60, 420-425, 2009 | 2009 |
|
|
| 59 | Antioxidant Activity and Phenolic content of Coleus blumei Benth.(LAMIACEAE) | Universiti Malaysia Pahang (UMP), 2009 | 2009 |
|
|
| 60 | Data mining to discover pattern of university student admission and programme selection/Mohd Rizal Mahamad Nor@ Mohammad Nor | Universiti Teknologi MARA, 2007 | 2007 |
|
|
| 61 | Status and controlling of cotton red fruit maggot in Indonesia | 1998 |
|
|
|
| 62 | EKSPLORASI SEKAT DAN JALAN DALAM PENGEMBANGAN EDUWISATA BERBASIS AGRONURSING |
|
|
||
| 63 | PENGARUH PENGEMBANGAN SUMBER DAYA MANUSIA DAN DISIPLIN KERJA TERHADAP KINERJA PEGAWAI KANTOR KECAMATAN PENRANG |
|
|
||
| 64 | PERBANDINGAN DINAMIKA KADAR C-REACTIVE PROTEIN ANTARA NUTRISI ENTERAL DINI DENGAN NUTRISI ENTERAL LAMBAT PADA PASIEN PASCABEDAH CEDERA OTAK |
|
|
||
| 65 | Mechanical Assemblies Design of Underwater Electric Motor |
|
|
||
| 66 | Hubungan antara Tingkat Kecemasan Siswa dalam Menghadapi Ujian dengan Hasil Belajar Akuntansi Siswa Kelas XI SMA Negeri 1 Raha | Selami 1 (34), 221393, 0 |
|
|
|
| 67 | I-KAZ Method for Tool Wear Monitoring Using Dynamic Forces Signal |
|
|
||
| 68 | dkk. 2017 | Ilmu Pendidikan Islam. Yogyakarta: Pustaka Pelajar, 0 |
|
|
|
| 69 | Development of Control System for Monitoring the Function of Drip Irrigation Equipment in Plant Nurseries | International Conference on Science and Advanced Technology (ICSAT), 0 |
|
|
|
| 70 | ANALISIS PENGARUH PELAYANAN, FASILITAS, HARGA SERTA PHYSICAL EVIDENCE TERHADAP KEPUASAN PASIEN DALAM MELAKUKAN PENGOBATAN DI RSI |
|
|
||
| 71 | Underwater Localisation Techniques for Marine Applications |
|
|
||
| 72 | Development of Man-Machine Interface using Matlab: an adaptive network-based fuzzy inference system modeling for laser machining |
|
|
||
| 73 | Influence of processing techniques on the performance of outworn denim fabric-reinforced polymer composites | Journal of Applied Science and Engineering 30, 26030010, 2026 | 2026 |
|
|
| 74 | Development of mini 4-axis dynamometer using semiconductor strain sensors for cutting force and torque measurement in micro/meso-scale machining | Measurement 259 (Part A), 119620, 2026 | 2026 |
|
|
| 75 | Design and experimental study of piezoelectric energy harvester integrated in rotating vehicle tire using end-cap system | Results in Engineering 25, 104195, 2025 | 2025 |
|
|
| 76 | Experimental study on the feasibility of graphite nanoparticles with fruit tree-based vegetable oils for nanofluid MQL in milling AISI 304 stainless steel | Jurnal Tribologi 44, 183-199, 2025 | 2025 |
|
|
| 77 | Influence of graphite nanoparticle concentration and vegetable oil type in minimum quantity lubrication on the milling performance of SKD11 tool steel | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of …, 2025 | 2025 |
|
|
| 78 | Development and testing of a stationary dynamometer using cross-beam-type force-sensing elements for three-axis cutting force measurement in milling operations | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …, 2024 | 2024 |
|
|
| 79 | A Comparative Study of the Static and Dynamic Characteristics of Jute and Glass Fiber-Reinforced Polyester Composites | Experimental Techniques 48 (2), 229-237, 2024 | 2024 |
|
|
| 80 | A rotating piezoelectric energy harvester in a spindle shaft under magnetic repulsive-attractive forces | International Journal of Ambient Energy 45 (1), 2394826, 2024 | 2024 |
|
|
| 81 | Experimental investigation on performance of bubble-bursting atomization methods for minimum quantity lubrication in face milling tool steel | Results in Engineering 24, 102903, 2024 | 2024 |
|
|
| 82 | Pembangunan Pangkalan Data Daya Pemotongan S45C untuk Pemonitoran Status Haus Mata Alat | Jurnal Kejuruteraan 35 (5), 1025-1032, 2023 | 2023 |
|
|
| 83 | Development of a Portable Universal Testing Machine for Investigating the Mechanical Properties of Medium-Strength Materials. | Aceh International Journal of Science & Technology 12 (1), 2023 | 2023 |
|
|
| 84 | Design and experimental study of a piezoelectric energy harvester embedded in a rotating spindle excited by magnetic force | Sensors and Actuators A: Physical 340, 113521, 2022 | 2022 |
|
|
| 85 | Comparison of oil press for jatropha oil-a review | Research in Agricultural Engineering, 2016 | 2016 |
|
|
| 86 | Comparison of oil press for Jatropha oil-a review. | 2015 |
|
|
|
| 87 | Design and analysis of single screw extruder for Jatropha seeds using finite element method. | Research Journal of Applied Sciences, Engineering and Technology 7 (10Â …, 2014 | 2014 |
|
|
List of Research Works
| No | Title | Focus | Scheme | Year | |
|---|---|---|---|---|---|
| 1 | Pemanfaatan Tanah Diatomae dari Kabupaten Aceh Besar untuk Bahan Tambah Mineral dalam Produksi Beton Mutu Tinggi dan Beton Mutu Ultra Tinggi | Material Maju | Penelitian Tesis Magister | 2019 |
|
| 2 | PERANCANGAN ALAT UJI LELAH UNTUK EVALUASI UMUR PAKAI KOMPONEN-KOMPONEN OTOMOTIF | Transportasi | Penelitian Terapan | 2023 |
|
| 3 | EXPERIMENTAL MODAL ANALYSIS (EMA) UNTUK MENDUKUNG KARAKTERISASI SIFAT MEKANIK DAN DINAMIK MATERIAL KOMPOSIT | INDUSTRI, INOVASI, DAN INFRASTRUKTUR | PENELITIAN LEKTOR KEPALA | 2022 |
|
| 4 | PERANCANGAN ALAT UJI LELAH UNTUK EVALUASI UMUR PAKAI KOMPONEN-KOMPONEN OTOMOTIF | Transportasi | Penelitian Terapan | 2022 |
|
| 5 | NOVEL GREEN BIODIESEL GENERATION FROM WASTE EDIBLE VEGETABLE OILS VIA COMBINED PROCESSING TECHNIQUES OF CO-CATALYSTS AND ELECTROCATALYSTS | ENERGI BERSIH DAN TERJANGKAU | PENELITIAN BERBASIS H-INDEKS | 2022 |
|
| 6 | KAJIAN EKSPERIMENTAL KARAKTERISTIK KOMPOSIT HYBRID SEBAGAI MATERIAL PEGAS DAUN | INDUSTRI, INOVASI, DAN INFRASTRUKTUR | PROGRAM RISET UNGGULAN USK PERCEPATAN DOKTOR | 2022 |
|
| 7 | Pemanfaatan Cocopeat Sebagai Campuran Polyurethane pada Insulasi Palka Kapal Ikan Tradisional Aceh | Material Maju | Penelitian Kerjasama Antar Perguruan Tinggi | 2021 |
|
| 8 | HILIRISASI INOVASI STATIONARY SEMICONDUCTOR DYNAMOMETER 3-AXIS (STATIONARY SEMIDYN-3A) UNTUK PENGUKURAN GAYA PEMOTONGAN DINAMIK PROSES PEMESINAN | INTEGRASI FOKUS RISET ENERGI - ENERGI BARU DAN TERBARUKAN | HILIRISASI INOVASI UNSYIAH | 2021 |
|
| 9 | PERANCANGAN ALAT UJI LELAH UNTUK EVALUASI UMUR PAKAI KOMPONEN-KOMPONEN OTOMOTIF | Transportasi | Penelitian Terapan | 2021 |
|
| 10 | NOVEL BIO-ELECTROSYNTHETIC PROCESSES OF AGRO-FOOD PROCESSING RESIDUES TO THE CONCURRENT PRODUCTION OF BIOFUEL AND BIOPRODUCT | PANGAN PERTANIAN | PENELITIAN BERBASIS H-INDEKS | 2021 |
|
| 11 | Pengembangan Sistem Karakterisasi Material Komposit melalui Impulse Excitation dan Multi-Sensor untuk Mendukung Teknologi Material Baru | Material Maju | Penelitian Dasar | 2021 |
|
| 12 | Pengembangan Sistem Karakterisasi Material Komposit melalui Impulse Excitation dan Multi-Sensor untuk Mendukung Teknologi Material Baru | Material Maju | Penelitian Dasar | 2020 |
|
| 13 | PENGEMBANGAN METODE PENDETEKSIAN KERUSAKAN MATERIAL KOMPOSIT | ENERGI BARU DAN TERBARUKAN , MATERIAL MAJU | PENELITIAN LEKTOR | 2020 |
|
| 14 | Pemanfaatan Cocopeat Sebagai Campuran Polyurethane pada Insulasi Palka Kapal Ikan Tradisional Aceh | Material Maju | Penelitian Kerjasama Antar Perguruan Tinggi | 2020 |
|
| 15 | A DYNAMIC CUTTING FORCE MEASUREMENT SYSTEM USING PIEZORESISTIVE SENSOR FOR MICRO DRILLING THIN PLATE OF COMPOSITE MATERIALS | ENERGI BARU DAN TERBARUKAN, MATERIAL MAJU, TEKNOLOGI INFORMASI DAN KOMUNIKASI, TRANSPORTASI | PENELITIAN BERBASIS H-INDEKS | 2019 |
|
| 16 | Pengembangan Sistem Karakterisasi Material Komposit melalui Impulse Excitation dan Multi-Sensor untuk Mendukung Teknologi Material Baru | Material Maju | Penelitian Dasar | 2019 |
|
| 17 | Pemodelan dan Karakterisasi Elemen Transduser Gaya untuk Sistem Dinamometer 3-Axis pada Proses Pemesinan<br /> | Material Maju | Penelitian Dasar Unggulan Perguruan Tinggi | 2019 |
|
| 18 | Pemodelan dan Karakterisasi Elemen Transduser Gaya untuk Sistem Dinamometer 3-Axis pada Proses Pemesinan<br /> | Material Maju | Penelitian Dasar Unggulan Perguruan Tinggi | 2018 |
|
| 19 | Penerapan Metoda Indentasi untuk Mengetahui Performa Pahat Potong Berbahan Keramik Tanpa Merusak Mata Potong | Material Maju | Penelitian Strategis Nasional Institusi | 2017 |
|
| 20 | Pemodelan dan Karakterisasi Elemen Transduser Gaya untuk Sistem Dinamometer 3-Axis pada Proses Pemesinan<br /> | Material Maju | Penelitian Dasar Unggulan Perguruan Tinggi | 2017 |
|
| 21 | ANALISIS KARAKTERISTIK STATIK, DINAMIK, DAN FLAME RETARDANT PADA KOMPOSIT SERAT HIBRIDA LIMBAH MESOKARP/TEKSTIL DENGAN MODIFIKASI NANO SILIKA DAN AMMONIUM POLYPHOSPHATE | MATERIAL MAJU | PENELITIAN PROFESOR | 2025 |
|
| 22 | Pemanfaatan Limbah Minyak Goreng dan Minyak Castor dengan Aditif Nanopartikel sebagai Bio-Lubricant Minimum Quantity Lubrication (MQL) untuk Manufaktur Berkelanjutan | Produk rekayasa keteknikan | Penelitian Fundamental - Reguler | 2025 |
|
| 23 | KAJIAN PERBANDINGAN METODE MANUFAKTUR STRUKTUR KOMPOSIT BERPENGUAT DENIM TERHADAP KARAKTERISTIK STATIK DAN DINAMIK | MATERIAL MAJU | PENELITIAN PROFESOR | 2024 |
|
| 24 | EXPERIMENTAL INVESTIGATION OF THE BUBBLE-BURSTING ATOMIZATION MINIMAL QUANTITY LUBRICATION (BBA-MQL) SYSTEM FOR MILLING HARDENED P20+NI TOOL STEEL | MATERIAL MAJU | INTERNATIONAL COLLABORATIVE RESEARCHâWORLD CLASS UNIVERSITY | 2024 |
|
| 25 | Pengembangan Energy Harvester sebagai Sumber Daya Mandiri Sensor Nirkabel Terintegrasi pada Spindel Berputar untuk Sistem Pemantauan secara Realtime | Energi | Penelitian Terapan | 2024 |
|
| 26 | DESAIN DAN STUDI EKSPERIMENTAL SISTEM PEMANENAN ENERGI PIEZOELEKTRIK DENGAN PUTARAN DAN TEKANAN BAN KENDARAN | TRANSPORTASI | PROGRAM RISET UNGGULAN USK PERCEPATAN DOKTOR | 2024 |
|
| 27 | ECO-FRIENDLY BIODIESEL PRODUCTION VIA ELECTROLYTIC PROCESS AS A NOVEL APPROACH FROM WASTE AND NON-WASTE OF PALM OIL | ENERGI BARU DAN TERBARUKAN | PENELITIAN H-INDEKS | 2023 |
|
| 28 | PENGEMBANGAN NANAGENERATOR TRIBOELEKTRIK DARI PEMANENAN ENERGI TEKANAN BAN KENDARAAN UNTUK SENSOR NIRKABEL BERTENAGA MANDIRI | ENERGI BARU DAN TERBARUKAN, DAN TRANSPORTASI | PROGRAM RISET UNGGULAN USK PERCEPATAN DOKTOR | 2023 |
|
| 29 | KAJIAN EKSPERIMENTAL KINERJA PELUMAS NANOFLUID BERBASIS MINYAK NABATI UNTUK MINIMUM QUANTITY LUBRICATION (MQL) PADA PROSES MILLING STAINLESS STEEL 304 | MATERIAL MAJU | PENELITIAN CALON PROFESOR | 2023 |
|
| 30 | Pengembangan Energy Harvester sebagai Sumber Daya Mandiri Sensor Nirkabel Terintegrasi pada Spindel Berputar untuk Sistem Pemantauan secara Realtime | Energi | Penelitian Terapan - Jalur Hilirisasi | 2023 |
|
| 31 | PEMBANGUNAN APLIKASI PENGELOMPOKAN TERPADU TIGA DIMENSI BERASASKAN FUZZY C-MEANS UNTUK DATA TEKNIK | MATERIAL MAJU | PENELITIAN PROFESOR | 2023 |
|
| 32 | Pengembangan Tri-axial Micro-Force Dynamometer Berbasis Semiconductor sebagai Pendukung Sistem Online Monitoring Kualitas Permukaan pada Proses Fine Turning untuk Pembuatan Komponen Otomotif | Material Maju | Penelitian Terapan | 2022 |
|
| 33 | Pengembangan Mekanisme Rotational Energy Harvesting untuk Sistem Wireless Tool Holder Multi-Sensor | Energi | World Class Research | 2021 |
|
| 34 | Pengembangan Tri-axial Micro-Force Dynamometer Berbasis Semiconductor sebagai Pendukung Sistem Online Monitoring Kualitas Permukaan pada Proses Fine Turning untuk Pembuatan Komponen Otomotif | Material Maju | Penelitian Terapan | 2021 |
|
List of Community Services
| No | Title | Focus | Scheme | Year | |
|---|---|---|---|---|---|
| 1 | PERALATAN MESIN PORTABLE SILAGE UNTUK PRODUKSI PAKAN RUMINANSIA DALAM UPAYA SWASEMBADA DAGING SAPI DI KECAMATAN INGIN JAYA KABUPATEN ACEH BESAR | TANPA KEMISKINAN; TANPA KELAPARAN; KEHIDUPAN SEHAT DAN SEJAHTERA | PENGABDIAN KEPADA MASYARAKAT BERBASIS PRODUK | 2022 |
|
| 2 | PERALATAN MESIN PORTABLE BIO-FERTILIZER BOKASHI UNTUK MENDUKUNG PEMBERDAYAAN MASYARAKAT DI KECAMATAN INGIN JAYA KABUPATEN ACEH BESAR | PANGAN PERTANIAN | PENGABDIAN KEPADA MASYARAKAT BERBASIS PRODUK | 2021 |
|
| 3 | PERALATAN MESIN PORTABLE SILAGE UNTUK PRODUKSI PAKAN RUMINANSIA DALAM UPAYA SWASEMBADA DAGING SAPI DI KECAMATAN INGIN JAYA KABUPATEN ACEH BESAR | TANPA KEMISKINAN; TANPA KELAPARAN; KEHIDUPAN SEHAT DAN SEJAHTERA | PENGABDIAN KEPADA MASYARAKAT BERBASIS PRODUK | 2022 |
|
List of IPRs
| No | Title | Publication Date | Category | Request Number | |
|---|---|---|---|---|---|
| 1 | Pengukuran Teknik: Dasar dan Aplikasi | 11 October 2021 | hak cipta | EC00202146915 |
|
| 2 | Dinamometer Proses Frais Berbasis Sensor Regangan Semikonduktor dan Transduser Balok Silang Plat Pipih Paralel | NaN undefined NaN | paten | P00201912011 |
|
| 3 | Dinamometer 4-Sumbu Berbasis Sensor Piezoresistive untuk Pengukuran Komponen Gaya Pemotongan Pemesinan Mikro pada Proses Gurdi dan Frais | NaN undefined NaN | paten | S00201911475 |
|
| 4 | ALAT ARBOR PEMEGANG PAHAT TERINTEGRASI GENERATOR PIEZOELEKTRIK TEREKSITASI GAYA MAGNET DARI PUTARAN SPINDEL MESIN FRAIS | 24 September 2024 | paten sederhana | S00202409846 |
|
| 5 | GENERATOR LISTRIK BERBASIS PIEZOELEKTRIK TERINTEGRASI PADA ARBOR PEMEGANG PAHAT TEREKSITASI GAYA MAGNET DARI PUTARAN SPINDEL MESIN FRAIS | 11 October 2024 | paten sederhana | IDS000009706 |
|
List of Books
| No | Title | Publisher | Place | Category | ISBN | Year | |
|---|---|---|---|---|---|---|---|
| 1 | Pengukuran teknik : dasar dan aplikasi | Syiah Kuala University Press | Banda Aceh | buku ajar | 9786232641198 | 2020 |
|